CTLite G7-140W AquaSun LED Aquarium Light User Manual

CTLite G7-140W AquaSun LED Aquarium Light

Product Information

Specifications

• LED Brand: CREE/Epistar
• LED Quantity: 52pcs
• Max Power: 5W

Frequently Asked Questions

• Q: How do I set the system time on the G7 AquaSun lamp?
  • A: To set the system time, navigate to System > System Time in the menu and adjust the time settings as needed.
• Q: Can I reset the lamp to factory default settings?
  • A: Yes, you can reset the lamp to factory default settings by selecting System > Load Default in the menu.
• Q: What is the temperature range the lamp can operate in?
  • A: The lamp can operate within a temperature range of -10°C to 50°C.

Information

• Timer
• Dimmer

Specification

LED Layout

Spectrum

Operation Manual

Touch Buttons and Display

Menu Content

Menu Introduction

OLED Display Screen

G7 AquaSun support OLED screen display. The OLED screen can show the lamps status as the following figures.

• For master lamps, there are two lines.
• First line is the clock and master group no.
• Second line shows the running mode (such as SPS or LPS etc.) and the current working stage.
• For example, Timer [01->02], the light is running in timer mode, and working from the first time point to the second time point.

Introduction of menu items

Press the “OK” button to enter the menu.

1. Current Bri.

   • Displaying the real-time brightness (as a percentage) of each channel.

2. Power On/Off

   • Turn off the light without shut off the power supply.
   • When select power “off”, all led channels turn off.
   • When select power “on”, all led channels works and lamps resume normal running.

3. Mode Select

   • User can select the different working mode for tank, such as SPS, LPS, MIX, Self-def and Constant.

4. Mode Setting
   Users can set all parameters for modes, Include SPS, LPS, MIX, Self-def and Constant mode.

   • Constant mode
   • This mode only set each channel’s brightness and it will run all day without any change.
   • Except the Constant mode, all other modes need to set data as below:
   1. Sunrise time
   • Set the start and end time of sunrise (Time point 01 &02)
   2. Sunset time
   • Set the start and end time of sunset (Time point 03 &04)
   3. Moon time
   • Set the start and end time of Moon (Time point 04 &05)
   4. Sunlight
   • Set the brightness of each channels of daytime. (Time point 02 to time point 03)
   5. Moonlight
   • Set the brightness of each channels of night. (Time point 04 to time point 01)
   6. Time Preview
   • Time preview function can let users to check timer mode configuration. Users can preview the changes of 24 hours running data in quick time.
   • Please note that the lamp will quickly show brightness of all channels of whole day in preview function.

The graph below shows the light curve of 24 hours:

1. System
2. System Time

  * Set user local time of lamp.
2. Load Default
  * Clear user’s setting parameters, and restore to the factory default settings.
3. Temperature
  * Shows the current time, the internal temperature of the lamp, and the status of the fan.
4. Standby Time
  * The OLED screen will turn off after the screen off time (min) if no any operations.
5. OLED Bri.
  * Set the OLED screen brightness.

Group

When multi G7 lamps in one a big tank, users can set one G7 lamp as master and others as slave with same group no. After setting, slave lamps will follow master.

Master-slave lamp setup

• Master: Main lamp, it can control all slave lamps in a same group. Users can only do settings on master, no need other operations on slaves.
• Slave: Choose [slave] mode and group no. the slave lamp will follow master lamp and no need set other parameters. It will run same with master.

Group no

• The master and slave lights must be in the same group, so that they can be synchronized.
• G7 can support maximum number of groups: 10

Remote Function

Note: Remote need install a lithium battery CR2025 3V before use.

Configuration and Default

1. Set System Time
   • Touch “ok”, Enter “5.system” item, select “1. System time” and set local clock.
2. Enter Mode Setting and set sunrise/sunset /moon time, and brightness Touch “ok” , select “4.Mode Setting”, press “ok” to select type as “SPS”, select “sunrise” “sunset”, “moon time” to set time. Select “sunlight” to set channels brightness of daytime; Select “moonlight” to set brightness of moon.
3. Enter Mode Select and select one mode for your tank.
4. If multi G7 lamps in one big tank, set one G7 as master, others are slave.

The following is suggested setting for your reference:

SPS

LPS

MIX

Fresh

Self-Def

Constant

Installation

Packing list

1. G7 LED aquarium light * 1 pcs
2. Full Aluminum bracket * 1 set
   • (Screws and bracket base included)
3. Screws for bracket * 1 set
4. User’s Manual
5. Adapter * 1 set
6. Power cord *1
7. Hanging Kit *2

Two Installation Ways

Rack for Tanks

Assembling Steps of Rack

1. G7 body
2. External adaptor
3. AC cord
4. Extension Rack
5. Rack
6. Rack Base
7. Hanging Kits
8. Remote
9. Universal connector

G7 Configuration for Tanks

Smart Choice for Reef Tanks

Please Note:

1. We suggest one G7 cover 32 inch in length, and 32 inch in depth for SPS.
2. One gallon need 2-3 watts.
3. Don’t set multi masters in one group. Slave lamps will flash.

Warranty And Contact Us

Warranty

• No damage to human factors, 2 years warranty
• Life-long technical support, less than 24 hours reply

If any doubt or problem with our products, please feel free and contact us!

Contact Us

• Email address:jack@ctlite.cn
• Website: www.ctlite.cn
• Email address:info@ctlite.cn
• Ask question /QA on our page

We offer lifetime technical support! All the message will be replied at 24 hours.

Contact us anytime

Documents / Resources

| CTLite G7-140W AquaSun LED Aquarium Light [pdf] User Manual
G7-140W AquaSun LED Aquarium Light, G7-140W, AquaSun LED Aquarium Light, LED Aquarium Light, Aquarium Light
---|---

References

• CTLite LED Grow Lights and Aquarium Lights

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>