LKTOP MINI 34 Series Two Way Charging Hub User Manual

LKTOP MINI 34 Series Two Way Charging Hub

Matters needing attention

• Before using this product, please carefully read and follow all safety and compliance instructions related to this product. Do not use the charger in direct sunlight, rain, or damp environments.
• The CHARGING HUB should be kept away from hazardous materials such as heat sources, high pressure, water, flammable gases, corrosive agents, etc.
• In the event of fire, please use dry powder fire extinguishers correctly to extinguish the fire. Using liquid-type fire extinguishers may pose a risk of electric shock.
• It is strictly prohibited to use chargers in lightning and thunderstorm weather.
• Keep the interior of the charging HUB dry and avoid entering liquids such as water and oil. Please pay attention to insulation and fire prevention when using.
• When charging, please stay away from combustible materials and do not place the charging HUB or battery on the carpet for charging.
• Do not touch the metal terminals of the battery interface with your hands or other objects. If there are foreign objects attached to the metal terminals, please wipe them clean with a dry cloth when the power is turned off.

Product Introduction

The LKTOP MINI3/4 SERIES TWO-WAY CHARGING HUB is a multifunctional charging hub that integrates charging, a mobile power bank, illumination, and distress reminder functions. Can charge three batteries, Paired with batteries, it can serve as a flashlight or power bank to charge devices such as mobile phones or remote controllers. The distress reminder function adopts a dynamic SOS intelligent algorithm, providing reliable support and convenience for outdoor exploration, emergency rescue, night flight and other scenarios.

1. CDUSB-A interface
2. USB-Interface
3. Function button
4. Status indicator light
5. LEDlight s
6. LEDlightingb-button

Product instructions

Charging intelligent flight batteries

This manual uses the LKTOP MINI3/4 SERIES TWO-WAY CHARGING HUB and LKTOP 100W GaN Multi-Port Charger as examples for charging the DJI Mini 3/Mini 4 Pro intelligent flight battery. Up to three DJI Mini 3/Mini 4 Pro intelligent flight batteries can be connected.

T8kingLICTOPMINl3/4SERIESTWO-WAYO-IARGINGHUB(MM433-100) +LKTOP 1 00-N GaN Multi-Port O,larger as an example

Charging steps

1. Connect the charging hub to the power interface of the AC power supply (100-240V, 50/60Hz), and connect the LKTOP MINI 3/4 SERIES TWO-WAY CHARGING HUB USB-C port to the charger.
2. Insert the intelligent flight battery into the LKTOP MINI 3/4 SERIES TWO-WAY CHARGING HUB
3. In the charging state, the intelligent flight battery level indicator light will cycle and flash, indicating the current battery level.
4. After the charging is completed, the corresponding status indicator light will turn green and remain on. Please promptly remove the battery from the Charging Hub and turn off the charger power.

MM433-37+30W charger charging schematic diagram: (Charging takes turns from high to low based on the remaining battery capacity, and the output power of the charger determines the charging power)

Taking LKTOP MINI3/4 SERIES TWO-WAY CHARGING HUB (MM433-37) + LKTOP 30W USB-C Charger as an example
MM433-37+65W charger charging schematic diagram: (Charging takes turns from high to low based on the remaining battery capacity, and the output power of the charger determines the charging power)

Taking LKTOP MINI3/4 SERIES TWO-WAY CHARGING HUB (MM433-37) +DJI RC2 remote controller + LKTOP 65W portable charger as an example

1. The fully charged indicator light will remain on, indicating that the battery is being used. Please promptly unplug the battery and turn off the charger power.
2. If the input power of the charger is less than 10W (5V/2A), it may not be possible to charge the battery.

MM433-100+100W charger charging schematic diagram: (Charging three batteries simultaneously)

Taking LKTOP MINI3/4 SERIES TWO-WAY CHARGING HUB(MM433-100) +LKTOP 100W GaN Multi-Port Charger as an example

Discharge steps

1. Insert the Mini 3/Mini 4 Pro intelligent flight battery into the LKTOP MINI 3/4 SERIES TWO-WAY CHARGING HUB
2. When there is no power supply connected to the USB-C port, connect the digital device or remote controller to the USB-A port to charge the digital device or remote controller.
3. After waiting for the device to fully charge, please promptly unplug the battery, remote controller, and other external devices.

Taking LKTOP MINI3/4 SERIES TWO-WAY CHARGING HUB (MM433-37) + DJI RC 2 remote controller + mobile phone as an example

Product specification parameters

• The test data were obtained under experimental conditions (at room temperature of 25 ° C) and are for reference only.
• PS: The weight/size information shown on this page is manually measured, and an error of 5g/3-5mm in soil is a normal phenomenon and is for reference only.

FCC STATEMENT

Compliance Information
FCC Compliance
This device complies with part 15 of the FCC Rules. operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

EU Compliance
SHENZHEN LIKE FLIGHT TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with Directive 2014/30/EU and 2014/35/EU.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>