LKTOP MC336 Series 200W Mavic 3 Triple Channel Charger User Guide
- June 16, 2024
- LKTOP
Table of Contents
MC336 Series 200W Mavic 3 Triple Channel Charger
200W Mavic 3
Series Triple Channel Charger
User Guide
V 1.0 2023.05
200W Mavic 3 Series Triple Channel Charger User Manual
Disclaimer
Thank you for purchasing the LKTOP 200W Mavic 3 Series Triple Channel Charger
(hereinafter
referred to as the “charger”). Before using the charger, please carefully read
this statement. Once you
use this product, it will be deemed that you fully acknowledge and accept all
the contents of this
statement. Please strictly follow the instructions in this manual when using
this product and pay close
attention to the precautions. Like-Flight is not responsible for any direct or
indirect losses or injuries
caused by improper use of the charger, including but not limited to charging
batteries of non-designated
models, short-circuiting the product, overheating, introducing foreign
objects, or touching the terminals
with hands or nearby objects.
LKTOP is the registered trademark of Like-Flight. The product names, brands,
etc., mentioned in this
document are trademarks or registered trademarks of their respective
companies. This product and
manual are the copyrighted property of Like-Flight. No form of reproduction or
reprinting is allowed
without permission. The use of this product and manual does not imply any
patent liability. The ultimate
interpretation of this document and all related documents of this product
belongs to Like-Flight.
Regarding the disclaimer, there may be differences between the different
language versions. The
Chinese version shall prevail in China, while the English version shall
prevail in other regions.
Product use precautions
-
Please read and follow all safety and compliance guidelines related to this document and the product
before using it. -
Do not use the charger in direct sunlight, rain, or humid environments.
-
Keep the charger away from heat sources, high voltage, water, flammable gases, corrosive substances,
and other hazardous materials. -
In the event of a fire, use a dry powder fire extinguisher for proper firefighting; using a liquid fire
extinguisher may pose an electric shock hazard. -
Using the charger during thunderstorms or lightning is strictly prohibited.
-
Keep the interior of the charger dry and prevent any liquids such as water or oil from entering.
-
Do not block the charger’s ventilation ports during charging; ensure proper ventilation and heat
dissipation. -
During charging, keep away from combustible materials, and do not charge the charger or batteries on
carpets. -
The charger’s battery interface is only intended for charging Mavic 3 series batteries; do not charge
batteries of other models. -
Place the charger on a stable surface during use and pay attention to insulation and fire prevention.
-
Do not touch the metal terminals of the battery interface with hands or other objects. If foreign objects are
attached to the metal terminals, wipe them clean with a dry cloth while the power is off. -
Ensure proper alignment of the battery interface with the charger interface before gently pressing and
inserting it; failure to do so may damage the battery. -
Do not unplug the AC power cord or battery charging cable during the charging process. After charging
is complete, promptly remove the battery, remote controller, phone, etc. -
Always use the charger within the appropriate environmental temperature range (recommended 0°C to
40°C). -
During the use of the charger, do not connect both the AC power and Type-C power simultaneously.
-
When moving or transporting the charger, do not pull on the power cord.
-
The AC power cord for the charger is rated at 6A; ensure that the external AC power source has a
current rating greater than 6A. -
Before use, ensure that the battery interface, charger interface, battery surface, and charger battery
compartment surface are dry and free of moisture before inserting the battery into the charger. -
Any disassembly or damage to the charger is strictly prohibited.
Product Introduction
The LKTOP 200W Mavic 3 Series Triple Channel Charger is an intelligent charger
that combines a
charger and charging hub into one device. It is capable of charging three
batteries simultaneously. The
charger has a maximum output power of up to 200W and offers two charging modes
for users to
choose from: 60% and 100% charging. While charging the three batteries, it
also has the capability to
charge the remote control or a phone (via the Type-C port). When paired with
the Mavic 3 Series
intelligent flight batteries, it can also function as a power bank
| Name | Description |
|---|---|
| Type-C |
Supports USB-PD fast charging protocol
Function Butten|
Press and hold the button for more than 2 seconds to switch between
storage mode (approximately 60% battery capacity) and full charge mode.
AC Power port|
AC power interface
Indicator Name| Description
Indicator Light L1|
Steady light when B1 battery is inserted
Indicator Light L2|
Steady light when B2 battery is inserted
Indicator Light L3|
Steady light when B3 battery is inserted
Indicator Light L4|
Steady light when B4 battery is inserted
Indicator Light L5|
Steady light when B5 battery is inserted
Indicator Light L6|
Steady light when B6 battery is inserted
Indicator Light L7|
Steady light when B7 battery is inserted
Indicator Light L8|
Steady light when B8 battery is inserted
Product Usage Instructions
· Charge smart flight batteries
This manual provides charging examples using the LKTOP 200W Mavic 3 Series
Triple Channel
Charger and DJI Mavic 3 Series batteries (BWX-260-5000-15.4). When using the
DJI Mavic 3 Series
batteries with the charger, you can charge up to three Mavic 3 Series
intelligent flight batteries
simultaneously.
· Charging procedure
-
Connect the charger to an AC power source (100-240V, 50/60Hz). Please use a power cord that is
compatible with the specifications. If needed, use a power adapter. -
With the intelligent flight battery turned off, connect the battery to the charger.
-
During the charging process, the battery level indicator lights on the intelligent flight battery will cycle
flashing and indicate the current battery level. -
When all the battery level indicator lights are turned off, it means that the intelligent flight battery is fully
charged. Please promptly remove the battery and turn off the charger’s power.
Product Usage Instructions
· Connect the smart flight battery to an external device for charging
This manual provides an example of discharging using the LKTOP 200W Mavic 3
Series three-channel
charger and DJI Mavic 3 Series battery (BWX-260-5000-15.4). The DJI Mavic 3
Series battery can be
charged simultaneously with up to three Mavic 3 Series intelligent flight
batteries using the charger. It
can also be charged by connecting it to the DJI Mavic 3 Series remote
controller via the Type-C
interface.
· Charging procedure
-
Connect the charger to an AC power source (100-240V, 50/60Hz). Please use a power cord that is
compatible with the charging specifications. If necessary, use a power adapter. -
With the intelligent flight battery turned off, connect the battery to the charger.
-
During the charging process, the battery’s power indicator will cycle flash and indicate the current
battery level. -
When the power indicator is all off, it means that the intelligent flight battery is fully charged. Please
remove the battery, remote controller, external electronic devices, etc., and turn off the charger’s power
promptly.
-
When using the LKTOP 200W Mavic 3 Triple Channel Charger to charge a single battery, the Type-C port can
provide a maximum power output of 100W. -
When using the LKTOP 200W Mavic 3 Triple Channel Charger to charge three batteries, the Type-C port can
provide a maximum power output of 10W. (As the battery charge level approaches full, the power output of the
Type-C port will gradually increase, up to a maximum of 100W.)
Product Usage Instructions
· Use the smart flight battery as a mobile power source to charge external devices
This manual provides discharging examples using the LKTOP 200W Mavic 3 Series
Triple Channel
Charger and DJI Mavic 3 Series batteries (BWX-260-5000-15.4). To discharge the
battery without
connecting the charger, insert the Mavic 3 Series intelligent flight battery.
First, turn on the intelligent
flight battery switch, and then connect the external device to the Type-C port
to charge the external
device.
· Discharge procedure
- Insert the intelligent flight battery into the charger.
- Turn on the intelligent flight battery switch. The charging/discharging indicator light will remain on.
- Connect the external device to the Type-C port to charge the external device.
- Once the battery, remote controller, and other external devices are fully charged, please promptly
remove them from the charger.
- When using the LKTOP 200W Mavic 3 Triple Channel Charger to use the intelligent flight battery as a power
bank to charge external devices, the Type-C interface can provide a maximum power output of 100W.
Type-C Output Port Compatible Products
Product Names Power/Description
DJI RC Pro Remote Controller Max 30W
DJI RC Pro Plus Remote Controller Max 100W
DJI RC Remote Controller Max 15W
DJI N1 Remote Controller Max 10W
Smartphones Supports PD protocol and some mobile phones
Tablets Support PD protocol and support some tablets
Product Specifications
Model MC336
Compatible Battery Model
Operating Temperature
AC Input Voltage
USB Type-C Input
DJI Mavic 3 Series batteries (BWX-260-5000-15.4)
0-40℃
100V-240V～2.5A 50Hz/60Hz 230W
9V～3A; 12V～3A; 15V～3A; 20V～5A
USB Type-C Output 5V⎓2A; 9V⎓3A; 12V⎓3A; 15V⎓3A; 20V⎓5A
PPS：33V-21V⎓5A
Charging Power 100W Max (for a single battery)/200W Max
(for multiple batteries)
Product Dimensions 151.6×75.1×60.25 mm (product host)
Product Weight 475g ±10%（excluding cable weight）
Charging Time Approximately 60 minutes for the first battery (15%-100%)
Approximately 70 minutes for three batteries (15%-100%)
*Charging time is tested in a laboratory environment at 25°C and is provided for reference only.