ZEVNI A04652 Kay 36 Inch Wide Black LED Kitchen Island Light Instruction Manual
- June 9, 2024
- ZEVNI
Table of Contents
Kay 36 Inch Wide Black LED Kitchen Island Light
Item Number: A04652
Instruction Manual
A04652 Kay 36 Inch Wide Black LED Kitchen Island Light
WARNING (To reduce the risk of fire, electric shock, or personal injury):
-
We suggest installation by a licensed electrician.
-
Please read the instruction carefully and save it as you may need it at a later time.
-
Before you start, NEVER attempt any work without shutting off the electricity until the work is done.
» Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
» Place the wall switch in the “OFF” position. -
Mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all sides.
Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required. -
Make sure that the ceiling or wall can stand the weight of the lamp before installation.
-
Make sure the voltage you are using is 120V. The maximum wattage is 30W.
-
Keep the lamp away from acidic and alkaline substances in case of damaging the surface of the lamp.
-
When replacing bulbs, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
-
The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products.
IMAGE FOR FINISHED PRODUCT:
ORDERING PARTS
Keep this sheet for future reference in case you need to order replacement
parts. All parts for this fixture can be ordered from the place of purchase.
Be sure to use exact wording from illustration when ordering parts.
CLEANING
To clean, wipe the fixture with a soft cloth. Do not use abrasive materials
such as scouring pads or powders, steel wool or abrasive paper.
TOOLS REQUIRED (NOT INCLUDED):
Before starting assembly and installation please prepare the needed tools as
below picture
| | | |
---|---|---|---|---
Ladder| Phillips head.flat blade screwdriver| Electrical tape| Pliers| Wire
cutter/Stripper
PARTS TYPE & QTY INCLUDING:
(C) Mounting plate (1)
(D) Screw (4)
(E) Canopy (1)
(F) Strain relief (2)
(G) Cord (2)
(H) Fixture bodyA (1)
(I) Small screw (2)
(J) Fixture bodyB (1)
(K) Socket (5)
ACCESSORIES & QTY ENCLOSED:
(A) Mounting screw (2)
(B) Wire connector (3)
(L) Allen wrench (1)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
-
Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in the above illustration.
-
Turn off power
Before you start the installation, NEVER attempt any work without shutting off the electricity until the work is done.
» Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
» Place the wall switch in the “OFF” position. -
Make installationStep A1 » Insert fixture bodyA (H) into fixture bodyB (J), then secure them with small screws (I).
Step A2 » Unscrew screws (D) from mounting plate (C) and canopy (E).
Step A3 » Attach mounting plate (C) to the outlet box with mounting screws (A).
Step A4 » Make wire connections
Connect wires as below wires connecting shown. PLEASE NOTE THAT GROUND WIRE IS BARE COPPER WIRE, NEVETwist wires together with plastic wire connectors until tightly joined, and
wrap each connector with approved electrical tape. Be sure that no wire
strands are exposed and then carefully tuck all wires into the outlet box.R CONNECT OTHER WIRES TO GROUND WIRES.
*Connect ground wires according to the below chart Connect wires according to the below chart
Note:* When parallel wires ( SPT I & SPT II ) are used. The neutral wire is square shaped or ridged and the other wire will be round in shape or smooth ( see illus. )Connect Black or Red Supply Wire to:| Connect White Supply Wire to:
---|---
Black| White
Parallel cord ( round & smooth )| *Parallel cord ( square & ridged )
Clear,Brown,Gold or Black without tracer| Clear,Brown,Gold or Black with tracer
Insulated wire ( other than green ) with copper conductor| Insulated wire ( other than green ) with silver conductor
Twist wires
together with plastic wire connectors until tightly joined, and wrap each
connector with approved electrical tape. Be sure that no wire strands are
exposed and then carefully tuck all wires into the outlet box.
Step A5 » Raise canopy (E) to the ceiling and secure canopy (E) in place by
threading screws (D) into canopy (E) and mounting plate (C).
Step A6 » The length of cords (G) is adjustable:
● Use Allen wrench (L) to unscrew the screws in strain reliefs (F), carefully
pull and push cords (G) through canopy (E) and strain reliefs (F) to lengthen
or shorten the length of cords (G).
● Once the desired height of fixture is achieved, carefully tighten the screw
till snug.
The direction of lights is adjustable:
● Rotate the swivel joints on fixture body within 350 degrees.
● Move sockets (K) up and down within 90 degrees.
- Check everything is already installed properly, then you could turn on the light. Enjoy!
+1 850 296 2377
Working hours : Mon Fri 9:00 16:00 EST
homecustomercare@outlook.com
www.ihomeangel.com
Documents / Resources
|
ZEVNI A04652 Kay 36 Inch Wide Black LED Kitchen Island
Light
[pdf] Instruction Manual
A04652 Kay 36 Inch Wide Black LED Kitchen Island Light, A04652, Kay 36 Inch
Wide Black LED Kitchen Island Light, Wide Black LED Kitchen Island Light, LED
Kitchen Island Light, Kitchen Island Light, Island Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>