msi M18 Gaming Mouse User Guide
- June 1, 2024
- MSI
Table of Contents
**msi M18 Gaming Mouse User Guide
**
Overview
- Left Button
- Right Button
- Scroll Wheel
- Forward Button
- Backward Button
- DPI Button
- LED Switch Button
- Bluetooth Pairing Button
- Slider Switch: 2.4G Mode / Off / Bluetooth Mode
- Wireless USB Dongle
6-level DPI Presets
Higher DPI is recommended for monitors with higher resolution. Cycle through different DPI levels by pressing the button repeatedly. The Scroll Wheel LED color will indicate the current DPI Level.
- 400 Green
- 800 Blue
- 1600 Red(default)
- 2500 Yellow
- 3200 Cyan
- 5000 Purple
Product with Radio Functionality (EMF)
Please refer to MSI official website: www.msi.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This equipment must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provide with
antenna installation instructions and consider removing the no-collocation
statement.This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.Caution! Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The maximum output of the operating band: mouse：BT LE: 2402~2480 MHz: 1 dBm2.4G SRD: 2405~2470 MHz: -23.32 dBmDongle:2.4G SRD:2405~2470 MHz：1 dBm.
Gaming mouse:
FCC ID: 2ABVN-M18
IC : 24513-M18
Dongle:
FCC ID: 2ABVN-M18D
IC: 24513-M18D
BSMI ROHS
Restricted substances and its chemical symbols
- Lead (Pb)
- Mercury (Hg)
- Cadmium (Cd)
Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2″” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The”-” indicates that the restricted substance corresponds to the exemption.
2.4G Wireless Pairing
If the Mouse is unresponsive after the USB dongle is plugged in, please click
on any of the mouse buttons to wake from sleep.
If your Mouse is still unresponsive after clicking any the buttons, it must be
paired again. Follow these steps to pair your device:
Step 1: Plug in the Wireless USB Dongle.
Step 2: Set the Slider Switch to 2.4G Mode at the bottom of the Mouse.
Step 3: Within 5 seconds upon setting the slider switch, press the Left,
Center, and Right Mouse Buttons at the same time. When Scroll Wheel LED starts
blinking Yellow, the Mouse is ready to pair with your computer.
Bluetooth Pairing
Step 1: Set the Slider Switch to Bluetooth Mode at the bottom of Mouse.
Step 2: Within 3 seconds, press the Bluetooth Paring Button at the bottom
of Mouse. When Scroll Wheel LED starts blinking Blue, the Mouse is ready to
pair with your computer.
Step 3. Activate the Bluetooth function on your device and select “MSI
M18” in the list of devices.
Wired Mouse Mode and battery charging
When the USB cable is plugged into the mouse USB-C port, it will automatically
switch to wired mouse mode.
We recommend switching off the power on the mouse before plugging in the USB
cable to charge.
When the battery is charging, the Scroll Wheel LED will be blinking Red. When
the battery is fully charged, the Red light will remain constant.
RGB Lighting and Power Saving Mode
Cycle through 3 RGB lighting effects and the power saving mode with the LED
Button underneath.
- All 3 RGB light effects on (default) – Scroll wheel, dragon shield logo, and the sides.
- Scroll Wheel: Scroll Wheel Light effects only.
- Dark mode: All light effects are off.
The mouse will automatically switch off all light effects and go into power- saving mode after 65 seconds without use; and will then go into sleep mode after 10 minutes.
Low Battery Indicator
When battery is low in 2.4G Wireless Mode or Bluetooth Mode, the Scroll Wheel
LED will be fast blinking Red.
Troubleshooting
If your device does not respond to your mouse in 2.4G or BLE mode, the pairing may have been unsuccessful. Please use the following methods to troubleshoot.
- Make sure the Power Switch at the bottom of mouse is switched to 2.4G or BLE.
- Restart your device and pair your mouse.
- Turn your mouse off, then back to 2.4G or BLE. The LED status lights should blink briefly, and if it doesn’t, please charge the mouse.
- Before re-pairing Bluetooth connection, please remove “M18” from the connected device list on your notebook. Press and hold the BT Pairing button at the bottom of mouse until “M18” shows up again on the Bluetooth device list, and click connect.
- Remove any metal objects between the USB dongle and the mouse that may interfere with reception.
Declaration of Conformity
Products bearing the CE marking comply with one or more of the following EU
Directives as may be applicable: RED 2014/53/EU ; Low Voltage Directive
2014/35/EU ; EMC Directive 2014/30/EU ; RoHS Directive 2011/65/
EU ; ErP Directive 2009/125/EC.
Compliance with these directives is assessed using applicable European
Harmonized Standards. The point of contact for regulatory matters is MSI-
Europe: Eindhoven 5706 5692 ER Son.
Battery Regulations
European Union: Batteries, battery packs, and accumulators should not be
disposed of as unsorted household waste. Please use the public collection
system to return, recycle, or treat them in compliance with the local
regulations.
WEEE Statements
European Union: This symbol on the product indicates that this product
cannot be discarded as municipal waste.
Instead, it is your responsibility to dispose of your waste electrical and
electronic equipment by handing it over to a designated collection point for
recycling. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
Micro-Star International Co., Ltd.
www.msi.com
MSI-Europe: Eindhoven 5706 5692 ER Son
Authorized Representative: MSI Computer (UK) Ltd.
10th Floor, The Tower, CP House, 97-107 Uxbridge Road, London, W5 5TL, UK.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>