iReliev ET-8080 TENS Unit + EMS Muscle Stimulator Quick Start Guide
- June 1, 2024
- iReliev
Table of Contents
iReliev ET-8080 TENS Unit + EMS Muscle Stimulator
PRODUCT FEATURES
- Electrical Muscle Stimulation (EMS) helps muscles heal and get stronger, and Transcutaneous Electrical Nerve Stimulation (TENS) eases pain.
- There are 14 pre-set treatment modes, including 8 TENS modes for pain relief and 6 EMS modes for muscle stimulation.
- Adjustable Intensity: It has 25 levels of intensity, so users can find the best setting for their health and pleasure.
- This device has a backlit LCD screen that is big and easy to read. It clearly shows the mode, time, and power settings.
- It has a portable lithium-ion battery that lets you use it for a long time on a single charge.
- It’s small and light, so you can take it with you and use it anywhere, at any time.
- With the timer function, you can set it to any length of time between 5 and 60 minutes, which makes therapy sessions more manageable.
- Two-Channel Control: It has two separate channels that can be used at the same time, and each channel can be set to a different volume level.
- With the lock function, you can’t change the settings by mistake while the device is in use.
- Auto Shut-Off: Turns off by itself after a certain amount of time, which saves battery life and keeps you safe.
- Adjustable Pulse Width and Frequency: Users can change the healing experience by changing the pulse width and frequency.
- Belt Clip: It comes with a belt clip that lets you use it without using your hands.
- Since this gadget has been “FDA cleared,” you can be sure that it meets high standards for quality and safety.
- Items that come with it: It comes with electrode pads, lead wires, and a charging cable, so you can start treatment right away.
- Memory: This feature remembers the last settings you used, which makes it easier to start therapy sessions without having to set up the device all over again.
USAGE INSTRUCTION
When you are familiar with the operation of this device, use the following steps in order as a quick reference to set up and operate your ET-8080 system. For more information, refer to the instruction manual.
- Fully charge the battery before using this device.
- Connect lead wire(s) to CH1 or CH2.
- Connect 2 small or 1 XL electrode pad(s) to respective lead wire(s).
- Remove electrode pads from the plastic film & place them on the skin per placements on pages 20 and 21 in the manual.
- Power on by pressing the “ON/+” button for three (3) seconds.
- Select TENS or EMS: Press and release the “MODE” button. Press and release “ON/+” or “OFF/-” to toggle between TENS and EMS. See pages 22 and 23 in the manual for mode descriptions.
- To select Therapy Mode: Press and release the “MODE” button, to navigate to the program quadrant of the LCD. Press and release “ON/+” or “OFF/-” to select the preferred therapy mode (program). See pages 22 and 23 in the manual for mode descriptions.
- To select treatment time, press the mode button see the lower right quadrant of the LCD screen blink. Press and release “ON/+” or “OFF/-” to increase or decrease treatment time from 5-60 minutes.
- To Adjust Intensity: Select the channel by pressing CH1 or CH2. The “CH1 • or CH2” quadrant of the LCD will flash on the display. To increase intensity press and release “ON/+” . To decrease intensity press and release “OFF/-” until the desired intensity level flashes on the display. Press “MODE” to save your selection.
SPECIAL FEATURES
- Locking Function: Press and hold the “ON/+” and “OFF/-” keys simultaneously for 3 seconds to lock/unlock the device. The locking function prevents accidental setting changes.
- Intensity Reset Feature: For your safety, the intensity level will default to “O” and will not increase past “1” if the device is not set up properly. Please follow the necessary steps 1-9. Be sure to have electrode pads firmly affixed to your skin.
Intensity level reset will occur in the following instances:
- If lead wire(s), and electrode pad(s) are not installed and affixed firmly to the body.
- If the therapy type or program has been changed.
- After the therapy session has elapsed.
SYSTEM DEFAULTS & FEATURES
- Automatic shut off: The device turns off automatically when the therapy time has elapsed or when no button is pressed for 60 seconds.
- Memory: The most recently set therapy time is stored. If you change the program mode during your therapy, the previous therapy time won’t restart, unless you reset it. The last treatment program you used will appear on the display when you turn on the device.
- Press mode to save your selection. The program selected will appear the next time you turn on the device.
CARE & MAINTENANCE
- Clean the Device Often: Use a clean, dry cloth to wipe down the device. Do not put water or cleaning products directly on the machine.
- Handle with Care: The device is strong, but you should still be careful not to damage the computer parts when you handle it.
- Put Away in a Dry Area: To avoid damage from water, keep the gadget and its parts in a dry area.
- Charge the Battery Correctly: To get the best performance and life from the battery, make sure you follow the manufacturer’s instructions for charging it.
- Check the battery often: Make sure it stays charged and get a new one if it does.
- As needed, replace the electrode pads. Over time, the pads lose their ability to stick and work well. Regularly replacing them is important to keep the treatment working.
- Keep the electrodes clean. Use a wet cloth to wipe down the pads with water after each use to get rid of any skin oils or residue.
- Disconnect Leads When Not in Use: To avoid extra stress or damage, take the lead wires off the device when it’s not in use.
- Check Lead Wires: Check lead wires often for damage or signs of wear, and replace them if needed.
- Do not drop the device. If you drop it, you could damage the screen or the internal circuits, so be careful when handling it.
- Do Not Take Apart: If you open the gadget, you might void the warranty and hurt its functionality. Get in touch with customer service if there are problems.
- Keep Away from Extreme Temperatures: Do not store or use the device in temperatures that are too hot or too cold; doing so could damage the computer parts.
- Only Use Accessories That Are Recommended: To keep the device in good shape, only use accessories that are suggested by the maker or that come with it.
- Making sure your device is always on the latest firmware version is important if it allows them. This will improve performance and add new features.
ExcelHealth Inc. 1603 Hart Street Southlake, TX 76092
- www.iReliev.com
- Phone: 855-723-2582
- Email: [email protected]
Register your device at https://iReliev.com/register to get a 2-year extended warranty on your IReliev system.
FREQUENTLY ASKED QUESTIONS
What are the main features of the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator?
The iReliev ET-8080 TENS Unit + EMS Muscle Stimulator combines TENS (Transcutaneous Electrical Nerve Stimulation) and EMS (Electrical Muscle Stimulation) technologies to provide pain relief and muscle stimulation. It is designed for use on the knee, ankle, whole body, and leg.
How does the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator differ from standalone TENS or EMS devices?
The iReliev ET-8080 TENS Unit + EMS Muscle Stimulator offers the combined benefits of TENS and EMS therapy in one device, allowing for versatile pain management and muscle conditioning.
What are the dimensions and weight of the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator?
The iReliev ET-8080 TENS Unit + EMS Muscle Stimulator measures 8.23 x 7.36 x 2.24 inches and weighs 0.06 kilograms, providing a compact and lightweight design for easy portability and use.
How is the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator powered?
The iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is powered by one lithium metal battery, offering convenient battery-powered operation.
What is the intended use of the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator?
The iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is intended for use on various body parts such as the knee, ankle, whole body, and leg to provide pain relief and muscle stimulation.
Does the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator have specific programs or settings for different body areas?
Yes, the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator likely includes multiple programs and settings tailored for different body areas to optimize pain relief and muscle conditioning.
Is the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator suitable for both acute and chronic pain conditions?
Yes, the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator can be used for both acute and chronic pain conditions, providing customizable therapy options for various pain management needs.
What safety precautions should be taken when using the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator?
Users should carefully read and follow the manufacturer's instructions for proper use of the device. Additionally, avoid using the device near the eyes, on the head, over the heart, or on areas of numbness or decreased sensation without consulting a healthcare professional.
Can the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator be used by individuals with medical implants or devices?
Individuals with medical implants or devices, such as pacemakers or implanted defibrillators, should consult their healthcare provider before using the iReliev ET-8080 TENS Unit + EMS Muscle Stimulator to ensure compatibility and safety.
What should I do if my iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is not turning on?
If your iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is not turning on, first ensure that the battery is inserted correctly and has sufficient charge. Try replacing the battery with a new one if needed.
How can I troubleshoot if my iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is not providing any stimulation?
If the device is not providing any stimulation, check the electrode pads to ensure they are properly connected and positioned on the skin. Also, make sure the intensity levels are adjusted appropriately.
What should I do if my iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is delivering weak or inconsistent stimulation?
Weak or inconsistent stimulation may indicate worn-out electrode pads or low battery power. Try replacing the pads with new ones and ensure the battery is fully charged. Adjust the intensity settings to see if it improves.
How can I troubleshoot if my iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is emitting unusual sounds or odors during use?
Unusual sounds or odors could indicate a malfunction in the device. Discontinue use immediately and check for any visible signs of damage or overheating.
What should I do if my iReliev ET-8080 TENS Unit + EMS Muscle Stimulator display screen is not functioning correctly?
If the display screen is not functioning correctly, try resetting the device by removing and reinserting the battery. Ensure that the battery is inserted correctly and has sufficient charge.
How can I troubleshoot if my iReliev ET-8080 TENS Unit + EMS Muscle Stimulator is heating up excessively during use?
Excessive heating could indicate a malfunction in the device or poor ventilation. Discontinue use immediately and allow the device to cool down. Check for any visible signs of damage or obstruction.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK: iReliev ET-8080 TENS Unit + EMS Muscle Stimulator Quick Start Guide
REFERENCE: iReliev ET-8080 TENS Unit + EMS Muscle Stimulator Quick Start Guide- Device.Report