hama 125113 Active Stylus Pro Instruction Manual

June 1, 2024
Hama

hama-LOGO

hama 125113 Active Stylus Pro

hama-125113-Active-Stylus-Pro-PRODUCT-IMAGE

Specifications

  • Product Name: Active Stylus PRO
  • Power Supply Input: 5V/1A
  • Battery Type: Li-Po
  • Minimum Capacity: 130 mAh / 0.48 Wh
  • Typical Capacity: 140 mAh / 0.52 Wh
  • Weight: 16 g
  • Dimensions: 146 x 9 mm

Product Usage Instructions

  1. Getting Started and Operation
    Thank you for choosing the Hama Active Stylus PRO. Follow the instructions below to start using the stylus:
    Warning Symbols:

    • Pay attention to safety instructions denoted by the warning symbol.
    • Additional information or important notes are indicated by the note symbol.
  2. Package Contents

    • Ensure all items in the package are present before starting to use the stylus.
  3. Safety Notes

    • Children should not clean or perform maintenance on the product without supervision.
  4. Charging the Battery

    • Use a USB charger to charge the stylus battery.
    • Only use original or approved accessories to prevent damage.
  5. Care and Maintenance
    Clean the stylus with a slightly damp, lint-free cloth. Avoid aggressive cleaning agents.

  6. Warranty Disclaimer
    Hama GmbH & Co KG does not provide warranty for damage due to improper use or installation.

Frequently Asked Questions (FAQ)

  • Q: Can I use any USB charger to charge the stylus battery?
    A: It is recommended to use a USB charger with an output of 5V/1A to charge the battery.

  • Q: How should I clean the stylus?
    A: Clean the stylus with a slightly damp, lint-free cloth. Avoid using aggressive cleaning agents.

Operating instruction

Controls and Displays

hama-125113-Active-Stylus-Pro- \(1\)

  1. Magnetic cap
  2. Micro-USB charging socket
  3. On/off switch /Status LED

Thank you for choosing a Hama product.

Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

  1. Explanation of Warning Symbols and Notes
    • Warning
    • This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
    • Note
    • This symbol is used to indicate additional information or important notes.

 Package Contents

  • Aktive Stylus ‘Pro’
  • USB charging cable
  • These operating instructions

 Safety Notes

  • The product is intended for private, non-commercial use only.
  • Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
  • Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
  • Keep this product, as all electrical products, out of the reach of children!
  • Do not drop the product and do not expose it to any major shocks.
  • The battery is integrated and cannot be removed.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not continue to operate the device if it becomes visibly damaged.
  • Children are not permitted to play with the device. Children may not clean the product or perform user maintenance without supervision.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Do not throw the battery or the product into fire.
  • Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

Getting started and operation

  • Note
  • Only use original accessories (or accessories approved by Hama), to prevent damage to the product.

Warning –Magnet

  • Keep bank cards or similar cards with magnetic strips away from the magnet. The data on the cards’ magnetic strip could be damaged or completely deleted.
  • People with pacemakers should keep away from the magnet. The magnet can negatively affect the function of the pace maker.

Charging the battery

Warning –Rechargeable battery

  • Only use suitable charging devices or USB connections for charging.
  • As a rule, do not use charging devices or USB connections that are defective and do not try to repair them yourself.
  • Do not overcharge the product or allow the battery to completely discharge.
  • Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure(for example, at high altitudes).
  • When stored over along period of time, batteries should be charged regularly (at least every three months).
  • The product has are chargeable battery.
  • Charge the product fully before using it for the first time.
  • Remove the magnetic cap (1) at the end of the input pen.
  • Connect the supplied USB charging cable to the USB port (2) on the product.
  • Connect the unused connector of the USB charging cable to a suitable USB charger.
  • Please refer to the operating instructions for the USB charger used.
  • The status LED (3) is constantly litred during charging. When the battery is fully charged, the status LED (3) is lit green.

Note –Charging/battery capacity

  • It takes about 90 minutes to fully charge the battery.
  • The input pen’s battery can be charged whether the input pen is on or off.
  • If the battery charge level is less than 10%, the status LED (3) flashes blue slowly and switches off automatically after about 10 seconds.
  • The actual battery life varies depending on use of the device, the settings and the ambient conditions (rechargeable batteries have a limited service life).

Note –Automatic switch-off
Be aware that the input pen switches off after 30 minutes of no activity.

  • Note -Damage to the display

  • To avoid causing damage to the display, please observe the following points:

  • Avoid exerting strong pressure on the display with the input pen.

  • Make sure that the display and the input pen are clean before they are used. Small debris such as grains of sand can cause scratches when using the input pen.

Note -Display protector /protective glass
Using display protectors /protective glass can lead to the function of the input stylus being restricted.

  • Press the on/off switch (3) to switch on the input pen. The status LED (3) is constantly lit blue.
  • Press and hold the on/off switch (3) to switch off the input pen. The status LED (3) goes out.

 Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

 Warranty Disclaimer

Hama GmbH &CoK Assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobserve the operating instructions and/or safety notes.

Technical Data

| Aktive Stylus “Pro”
---|---
Power supply| 5V/1A
Input| 5V  120 mA
Battery type| Li-Po
Min. capacity| 130 mAh / 0.48 Wh
Typ. capacity| 140 mAh / 0.52 Wh
Weight| 16 g
Dimensions (length x diameter)| 146 x 9 mm

Hama GmbH & Co KG
86652 Monheim/Germany

hama-125113-Active-Stylus-Pro- \(7\)

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Hama User Manuals

Related Manuals