Jabra PanaCast 50 Room System MS Instructions
- June 3, 2024
- Jabra
Table of Contents
Jabra PanaCast 50 Room System MS
How do I manually reset the Jabra PanaCast 50?
To reset the Jabra PanaCast 50 to the factory default settings, follow these steps.
- Press and hold the Reset button, located on the back of the video bar, until the LED flashes purple.
- Release the Reset button. After a few seconds, the LED will pulse white. The device will then emit a brief sound to indicate that the reset is complete.
Note: When you reset the Jabra PanaCast 50, all configured settings are reset and will need to be reconfigured. This includes the password protection and the setup with Jabra Xpress.
References
- Jabra Direct - Engineered to optimize and personalize your headset
- How do I manually reset the Jabra PanaCast 50? | Jabra PanaCast 50 Room System MS | FAQ | Jabra Support
- How do I manually update the firmware on my Jabra device using Jabra Direct? | Jabra PanaCast 50 Room System MS | FAQ | Jabra Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>