PENTAIR PS Series In Line Strainer Owner’s Manual

: August 13, 2024
: Pentair

Table of Contents

PENTAIR PS Series In Line Strainer
Product Information
Product Usage Instructions
STANDARD FEATURES
ENGINEERING SPECIFICATIONS
NECESSARY HARDWARE
ENGINEERING SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PENTAIR PS Series In Line Strainer

Product Information

Specifications

Model: PS Series In-Line Strainer for Commercial Pumps
Connection Size (inlet x outlet):
- PS6: 6 in. pipe x 6 in. pipe
- PS8: 8 in. pipe x 8 in. pipe
- PS10: 10 in. pipe x 10 in. pipe

Product Usage Instructions

Installation

Choose the appropriate PS Series strainer model based on your plumbing configuration.
Ensure all necessary hardware is available for installation.
Follow the manufacturer’s guidelines for connecting the strainer to the pump system.
Secure the strainer in place using the provided bolts.

Maintenance

Regularly check the strainer for debris and clean the basket as needed to maintain optimal flow performance.
If winterizing, make sure to utilize the removable drain feature of the strainer.
Monitor the pressure relief valve and replace if necessary to ensure proper operation.

FAQ

Q: What do the suffixes E and C indicate in the model designation?
A: The suffix E denotes Eccentric reducers, while the suffix C denotes Concentric reducers. If a Concentric reducer is used, the E suffix will be replaced with C.
Q: How do I determine the appropriate PS Series strainer size for my application?
A: Choose the strainer size based on your pipe size and flow rate requirements. Refer to the model designation table for detailed sizing information.
Q: Can I replace the pressure relief valve myself?
A: Yes, you can replace the pressure relief valve if needed. Refer to the user manual for instructions on proper replacement procedures.

PS Series strainers from Pentair Commercial Aquatics™ are designed for ease of installation and hydraulic efficiencies in commercial aquatics applications. In three standard sizes and with the addition of eccentric reducers, PS Series strainers fit with almost any plumbing configuration. The design of the PS Series strainers accommodates the high-flow performance in a variety of applications. ANSI Rated flange bolt pattern allows for ease of installation and peace of mind.

STANDARD FEATURES

Superior design for hydraulic performance.
Clear lid with easy access allows for simple visibility of debris.
Extra-large stainless steel strainer basket.
50 psi rating.
NSF listed.

ENGINEERING SPECIFICATIONS

The strainer shall consist of a nonmetallic fiberglass-reinforced plastic body, a clear cover that extends over the entire top, an O-ring seal, manually capable (no tools required) stainless steel/plastic screw fasteners, and a stainless steel basket.
The strainer body shall be able to be fitted with PVC plastic piping connections. These connections shall be capable of accommodating Van Stone Flanges, concentric reducers, and non-concentric reducers. The strainer shall have a removable drain for winterizing and a pressure relief valve set at 50 psi.
The strainer pipe sizes and basket characteristics shall meet and be listed to NSF/ANSI Rated Standard 50.

NECESSARY HARDWARE

Model Designation| Connection Size (inlet x outlet)| Inlet| Outlet
---|---|---|---
Bolt Size| Number| Bolt Size| Number
PS6:| | 6 in. pipe x 6 in. pipe| no bolts| no bolts
PS6X6| Plastic Flanged| 6 in. ANSI x 6 in. ANSI| 3/4 in.| 8| 3/4 in.| 8
PS6X5E| Plastic Flanged Eccentric| 6 in. ANSI x 5 in. ANSI| 3/4 in.| 8| 3/4 in.| 8
PS6X4E| Plastic Flanged Eccentric| 6 in. ANSI x 4 in. ANSI| 3/4 in.| 8| 5/8 in.| 8
PS6X3E| Plastic Flanged Eccentric| 6 in. ANSI x 3 in. ANSI| 3/4 in.| 8| 5/8 in.| 4
PS#X#E| Plastic Flanged Eccentric| Various Standard Reducers| various| various
PS8:| | 8 in. pipe x 8 in. pipe| no bolts| no bolts
PS8X8| Plastic Flanged| 8 in. ANSI x 8 in. ANSI| 3/4 in.| 8| 3/4 in.| 8
PS8X6E| Plastic Flanged Eccentric| 8 in. ANSI x 6 in. ANSI| 3/4 in.| 8| 3/4 in.| 8
PS8X5E| Plastic Flanged Eccentric| 8 in. ANSI x 5 in. ANSI| 3/4 in.| 8| 3/4 in.| 8
PS8X4E| Plastic Flanged Eccentric| 8 in. ANSI x 4 in. ANSI| 3/4 in.| 8| 3/4 in.| 8
PS#X#E| Plastic Flanged Eccentric| Various Standard Reducers| various| various
PS10:| | 10 in. pipe x 10 in. pipe| no bolts| no bolts
PS10X10| Plastic Flanged| 10 in. ANSI x 10 in. ANSI| 7/8 in.| 12| 7/8 in.| 12
PS10X8E| Plastic Flanged Eccentric| 10 in. ANSI x 8 in. ANSI| 7/8 in.| 12| 3/4 in.| 8
PS10X6E| Plastic Flanged Eccentric| 10 in. ANSI x 6 in. ANSI| 7/8 in.| 12| 3/4 in.| 8
PS10X5E| Plastic Flanged Eccentric| 10 in. ANSI x 5 in. ANSI| 7/8 in.| 12| 3/4 in.| 8
PS#X#E| Plastic Flanged Eccentric| Various Standard Reducers| various| various

NOTE: # designation indicates optional available reducers.
Suffix E denotes Eccentric reducers. Suffix C denotes Concentric reducers.
Suffix E will be replaced with C if a Concentric reducer is used.

ENGINEERING SPECIFICATIONS

Model	PS6	PS8	PS10
Inlet Pipe Size	6 in. (DIN 150)	8 in. (DIN 200)	10in. (DIN 250)
Maximum Pressure	50 psi (345 kPa)	50 psi (345 kPa)	50 psi (345 kPa)
Maximum Temperature	125˚ F (50˚ C)	125˚ F (50˚ C)	125˚ F (50˚ C)
Maximum Flow Rate	540 GPM (2040 LPM)	930 GPM (3520 LPM)	1470 GPM (5560 LPM)
Basket Open Area	224 sq. in. (1445 sq. cm)	224 sq. in. (1445 sq. cm)	335

DIMENSIONAL DATA

Strainer Size	“OD”	“A”	“B”	“C”
6	12.8	13.6	25.5	22.8
8	12.8	13.6	25.5	22.8
10	12.8	20.6	32.5	22.8

1620 HAWKINS AVE, SANFORD, NC 27330 800.831.7133 WWW.PENTAIRCOMMERCIAL.COM

All Pentair trademarks and logos are owned by Pentair or one of its global affiliates. PS Series™ and Pentair Commercial Aquatics™ are trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/ or other countries. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal-opportunity employer.

pentaircommercial.com