EFB ELEKTRONIK FTTH OUTLET SC OS2 FO Data Socket UP Instruction Manual
- June 4, 2024
- EFB ELEKTRONIK
Table of Contents
Instruction Manual
1
Remove faceplate.
A Cable organizer
B Faceplate.
C Splice tray
2
Route the fibers into wall box, cut and keep 130mm pigtail fibers to length for splicing and splice them according to the instruction of the splice unit.
A Splicing tube
3
3A. Place splicing tubes on splice tray
3B. Route the excess fiber cables on cable organizer and tight up with cable
tie.
A Cable tie
4
4A. Place the wired device back into wall box
4B. Align the screw hole with back box screws for locating.
A Cable tie
5
5A. Place wall plate frame.
5B. Remove protective dust cap from cable, insert the cable to adapters on
faceplate.
A Fiber adapter
B Protective dust cap
C Wall plate frame
6
Screw the faceplate, put designation paper/ transparent protective cover and screw hole cap on.
A Transparent protective cover
B Designation paper
C Screw hole cap
7
Installation finished and ready for using.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>