OHSUNG ELECTRONICS C313 Buzztv Ble Rcu User Manual
- June 1, 2024
- Ohsung Electronics
Table of Contents
OHSUNG ELECTRONICS C313 Buzztv Ble Rcu
Specifications
- Model Name: C313
- Frequency Range: 2402~2480 MHz
- Channel: 40 Channel
- Tx Output: 8 dBm
- Rx Sensitivity: AA x 2EA
- Size: 0 ~ +45
- Weight: Power
- Operating Temperature: 2.4 GHz band
Product Usage Instructions
-
Overview
The remote control uses wireless communication in the 2.4 GHz band and can control the STB. It also provides voice assistance to make it easier for the user to control the remote while connected to the STB. -
Precautions
Follow these precautions to ensure safe and proper usage of the remote controller. -
FCC Compliance
Ensure compliance with FCC regulations for interference and radiation exposure as outlined in the user manual. -
Manufacturer Information
Importer and address: OHSUNG ELECTRONICS CO., LTD. #181 Gongdan-Dong, Gumi, Gyeongbuk Republic of Korea
FAQ
-
Q: What should I do if the remote control is not responding?
A: Check if the batteries are inserted correctly and have sufficient power. You can also try re-pairing the remote with the STB. -
Q: Can the remote control be used with multiple devices?
A: The remote control is designed to work specifically with the STB it is paired with.
Order Number Test Report Number
- GETEC-C1-24-095 :
- GETEC-E3-24-022
FCC Part 15 subpart C
APPENDIX H
USER’S MANUAL
C313 BUZZTV BLE RCU User Information
(Model Name: C313)
Table of Contents
- Overview and specifications
- Overview
- Specifications
- Precautions
- FCC
- Impoter and address
- Manufacturer and address
Overview and specifications
-
Overview
The remote control uses wireless communication in the 2.4 GHz band and can control the STB. It also makes it easier for the user to control the remote control by providing voice assistance while it is connected to the STB. -
Specifications
|
---|---
- Model Name Frequency Range Channel
- Tx Output Rx Sensitivity
- Size
- Weight
- Power
- Operating Temperature
| C313
2402~2480 MHz
40 Channel
8 dBm
–97 dBm
45.0mm X 193.0mm X 26.8mm (Tolerance ± 0.5mm)
93g (Tolerance ± 5g, Without batteries)
AA x 2EA
0 ℃ ~ + 45 ℃
Precautions
- After replacing the battery, use it after pairing according to the remote control instructions.
- If the battery does not work after replacement, remove the battery and follow the instructions. Please retry pairing.
- If you are not using the remote control for a long time, it is recommended that you remove the battery.
- Do not disassemble or heat the battery.
- Do not apply severe shock enough to damage the case of the product.
- Do not put batteries in water.
- If the battery is inserted upside down, there is a risk of explosion.
- Discard the batteries used in the designated location.
FCC
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning!
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Federal Communication Commissions (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction.
Importer and address
Manufacturer and address
- OHSUNG ELECTRONICS CO., LTD.
-
181 Gongdan-Dong, Gumi, Gyeongbuk Republic of Korea
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>