Ledbox Company 2.4G Remote Control User Guide
- June 13, 2024
- Ledbox Company
Table of Contents
2.4G Remote Control
User Guide
LIGHTING
FOR ARCHITECTURAL,
HOSPITALITY &
RETAIL APPLICATIONS
2.4G Remote Control
ROBORADAR Downlight
Applicable model: Rxxx20xx90xx6xx
( xx: dynamic codes )
Note:
The remote control uses a storage battery which can be connected to a Micro-USB for chargings .
The remote control can remain on stand-by for 4 weeks whenfully charged.
Red light flashing : not paired.
Red light : locked.
*Green light : activate.
| Turn on / Pairing
When the luminaire has not been paired, the red light in the received area
will flash and “ beep ” will sound. Hold the button down for at least 3s,
luminaire will flash 3 times when paring is complete.
---|---
| Turn off
| Activate / Control single luminaire
After paring, press and hold down button and aim the IR beam at the receving
area of the luminaire. Activation is complete when the indicotor changes from
red to green and a “ beep ” sounds. You can use the remote control to control
the luminaire. NB: The luminaire will lock / inactivate automatically after 5
mins of inactivity.
| Activate / Control multiple luminaires
Press and hold buttons simultaneously until the indicator changes from red to
green.
| Inactivate / Lock luminaire
Press twice to deactivate / lock the luminaire.
Turn on/ off indicator
Hold the button down for 3s , the indicator will turn on / off.
| Reset
Press the button in activated (green light) status and turn off the luminaire
for 3s to return the luminaire to default setting.
| Vertical movement / Tilt
| Horizontal movement / Pan
| Increase brightness
Decrease brightness
---|---
| Wide angle
Narrow angle
| Increase color temperature
Decrease color temperature
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>