Ohsung Electronics Co Ltd C307-HW-WF Wi-Fi Dongle User Manual
- June 15, 2024
- Ohsung Electronics Co Ltd
Table of Contents
Ohsung Electronics Co Ltd C307-HW-WF Wi-Fi Dongle
Product Information
Specifications
- Model Name: C307-HW-WF
- Wi-Fi Standard: 802.11b/g/n
- Frequency Range: 2.400 GHz ~ 2.4835 GHz
- RF Power (Max): 20dBm(EIRP)
- Number of Channels: 13
- Power Source: USB 5V (4.5V~5.5V)
- Operational Temperature Range: -40°C to 60°C
Product Usage Instructions
Overview and Specifications for the Remote Control
Overview
Please refer to the SET manual for instructions on how to use the Wi-Fi Dongle. This product is powered by USB TYPE and operates by connecting to the designated USB CONNECTOR in the customer’s SET. End users can check operation methods through manuals, guides, etc included in the installed SET.
Specifications
The Wi-Fi Dongle (Model C307-HW-WF) operates on the Wi-Fi standard 802.11b/g/n
with a frequency range of 2.400 GHz to 2.4835 GHz. It has a maximum RF power
of 20dBm(EIRP) and supports 13 channels. The power source for the dongle is
USB 5V (4.5V~5.5V).
The operational temperature range is -40°C to 60°C.
Customer Support
For any customer support or assistance, please refer to the contact number
provided in the SET.
FAQ
What should I do if there is interference with the device?
If you experience interference, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Is this device compliant with FCC regulations?
Yes, this device complies with Part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.
Can I use this device outdoors?
No, this device is intended for indoor use only. Using it outdoors or in other modes not covered by this manual may violate FCC regulations and the user’s authority to use the product.
What are the RF radiation exposure guidelines?
This equipment complies with FCC radiation exposure limits for an
uncontrolled environment. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
Is this device compliant with Industry Canada standards?
Yes, this device complies with Industry Canada’s licence-exempt RSS
Standard(s). It must not cause interference and must accept any interference,
including interference that may cause undesired operation.
What are the RF radiation exposure limits for Canada?
This equipment complies with IC radiation exposure limits for an uncontrolled
environment. It should be installed and operated with a minimum distance of
20cm between the radiator and any part of
your body.
Wi-Fi Dongle
User Information
Model Name: C307-HW-WF
Overview and Specifications for the Remote Control
Overview
Please refer to the SET manual for instructions on how to use the Wi-Fi
Dongle. This product is powered by USB TYPE and operates by connecting to the
designated USB CONNECTOR in the customer’s SET. End users can check operation
methods through manuals, guides, etc included in the installed SET.
Specifications
Categories | Details |
---|---|
Model No. | C307-HW-WF |
Range of frequency | Wi-Fi, 802.11b/g/n |
2.400 GHz ~ 2.4835 GHz
RF Power(Max)| 20dBm(EIRP)
Channel| 13 channels
Power source| USB 5V(4.5V~5.5V)
Operational temperature range| -40℃~60℃
This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum”
Customer Support
Refer to the contact number for services provided in the SET.
Federal Communications Commission(FCC) Statement
Federal Communications Commission(FCC) Statement
You are cautioned that changes or modifications not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device.
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
It should be installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.
Industry Canada Statement
[English]
Industry Canada Statement
(For Canada)
This device complies with Industry Canada’s licence-exempt RSS
Stadard(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
(For Canada
This equipment complies with IC radiation exposure limits set forth for an
Uncontrolled environment. It should be installed and operated with a minimum
distance of 20cm between the radiator and any part of your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.