IKEA RODULF Desk Sit Stand User Manual

IKEA RODULF Desk Sit Stand

Product Information

The RODULF desk is a height-adjustable work desk that can be continuously adjusted between sitting and standing positions. It is designed for indoor use only in dry premises such as office environments. The desk should only be used with the controller included for safe operation.

Specifications:

• Sound Level: < 50 dB(A)
• Maximum load: 70 kg or 154 lb
• Model: RODULF-GF-470

Installation Instructions
It is crucial that the electrical cable of the desk has full mobility to ensure proper functioning. Ensure that no objects obstruct the desk’s movement range when adjusting its height, and only use approved work surfaces and secondary surfaces as per the instructions provided to prevent instability or component failure.

Product Usage Instructions

Manual Reset / First Use:

1. Perform a reset by simultaneously pressing the up and down buttons for at least 8 seconds.
2. Hold the buttons until the desk slowly moves to the lowest possible point, indicating the reset is complete.

Adjusting Desk Height:

1. Ensure no objects obstruct the desk’s height adjustment range.
2. To move the desk up, press and hold the up button until the desired height is reached.
3. To move the desk down, press and hold the down button until the desired height is reached.
4. For a simple memory setting, move the desk to the desired height, hold for a few seconds, then press the down button for 5 seconds to set a safe end position.

FAQ:

• Q: Can I use the desk outdoors?
  A: No, the RODULF desk is designed for indoor use only in dry premises such as office environments.

• Q: What should I do if the desk detects a sudden change in resistance?
  A: The desk will stop and reverse approximately 50mm to prevent damages. Ensure there are no obstructions in the desk’s movement range to avoid collisions with objects.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using the product.

DANGER
To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning or servicing

WARNING
Risk of electric shock, fire and injury. Review the assembly instruction to confirm that the appropriate critical components and accessories are being used with the furnishing.

1. Unplug from outlet before putting on or taking off parts.

2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
   Risk of injury – Keep children away from extended foot support (or other similar parts).

3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair.

5. Keep the cord away from heated surfaces.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

8. The table must not be overloaded – distributed load on top of the work top is 70kg/154lbs.

An electro-mechanically height adjustable work-surface with control interface to adjust height up and down. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe ay and understand the hazards involved by a person responsible for their safety. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.

SAVE THESE INSTRUCTIONS

Advice and instructions for RODULF.

• Sound Level: < 50 dB(A)
• Height setting interval: 68–115 cm or 26.8–45.3 inches
• Maximum load: 70 kg or 154 lb
• Temperature interval at usage: 50–104 °F or 10–40 °C.
• Temperature interval at storage: 0–158 °F or -18–70 °C
• Humidity: 20–90 % at 104 °F or 40 °C
• Electrical rating: 100–240 V AC, 50–60 Hz, 3.2–1.5 A
• Model: RODULF-GF-470

This desk shall only be used together with the controller included.
It is the responsibility of every person who installs, uses, repairs or services this desk to carefully read these instructions. Keep these instructions close to your sit/stand desk.

Installation instructions

• The desk is assembled according to separate assembly instructions.

• Connect the cable from one leg to the other.

• Connect the electrical cable to a wall socket.
  NOTE! The electrical cable must have full mobility.

• The desk is now ready for use.

• The motors stop automatically when the desk reaches its lowest or highest position.

Use of the desk

• The desk shall only be used as a work desk that can be continuously adjusted between sitting and standing position. The desk shall only be used indoors and in dry premises (office environment or similar).

The desk must not be overloaded – the maximum load is 70 kg/154 lb. The system may be run continuously for a maximum 1 minute. The motors must rest for approximately 9 minutes it can be used again.

QUICK GUIDE

Manual reset / first use:
Perform a reset by simultaneously pressing the up and down buttons for at least 8 seconds. Keep holding the buttons and the desk will slowly move to the lowest possible point. Reset is complete when the desk has stopped at the lowest point.
Follow these instructions when adjusting desk height:

1. Make sure no objects are in the way of the desk height adjustment range.
2. In order to run the desk up or down, press the man oeuvre button up or down, respectively.

Press the up button and continue to hold until desired desktop height is reached.

Press the down button and continue to hold until desired desktop height is reached.

To access full stroke:

• Release the down button at the lowest safe point and then press the down button again for 5 seconds. The desk will move to the mechanical lowest height to have full stroke access.

Simple memory
To set memory/end positions:

• Move your desk to the level you want to store.
• Press both buttons three times (0.5-1 second between each press).
• Then press “up” or “down” to set the position (0.5-1 second).
• Do the same for your second stored setting.

Collision detection

• The system is designed to avoid possible damages to equipment due to collision. When desk detects a sudden change in resistance it will stop the movement and reverse approximately 50mm. 25mm of travel to activate in both directions.

Safety regulations

• When the desk is run up/down, keep the necessary safety distance to avoid being trapped between the moving desk top and fixed objects in the surrounding area.
• When the desk is run up/down the user should keep watch so that nobody is injured or no object is damaged. The desktop must not bump into a fixed object in case it overturns. Remove any office chair before the desk is run up/down, each time.
• The desk legs must not be altered or reconstructed in any way. During service and repair work of the desk, the electrical cable must always be disconnected from the wall socket.
• Modifications to the legs are absolutely prohibited.
• The desk must not be used as a hoisting device for people.

Mount only approved work surfaces and secondary surfaces in accordance with instructions. Failure to do so may cause instability, collapse, or failure of electrical components.

Maintenance and repair instructions

After approximately 1 week of use, check that the screws are properly tightened.

• If the desk cannot be lowered or raised, check the connections between the control box and the wall socket.
• If any part of the electrical system is to be replaced, the electrical cable must first be disconnected from the wall socket. Replace the electrical part and then reconnect the electrical cable to the wall socket. The desk is now ready for use.

If the desk still does not work, please contact your nearest IKEA store or customer service.

Product Servicing
Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks.
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
Telephone no.: +46(0)476-648500

Technical data

• Model name RODULF si/st desk 140×80
• Type number RODULF-GF-470
• Input 100–240 V AC 50/60 Hz
• Standby power consumption <0.1 W
• Operating temperatures 10–40 °C (50–104 °F)
• Operating humidity 20–90 % RH at 40 °C (104 °F)
• Sound level: <50 dB(A)
• Height setting interval: 68–115 cm or 26.8–45.3 inches
• Maximum load: 70 kg or 154 lb

Trouble shooting guide

NOTE! Do always disconnect the cable from the wall socket before maintenance!

FCC

This device complies with Part 15 of the FCC Rules.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling by local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

MX
Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México.
Tel. 55-8310-8310.

© Inter IKEA Systems B.V. 2020

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>