IBIKE B0CMZB96Y4 Electric Bike 20 Folding Electric Bike for Adults User Manual

IBIKE B0CMZB96Y4 Electric Bike 20 Folding Electric Bike for Adults

FULLY CHARGE BATTERIES BEFORE FIRST USE

FULLY CHARGE BATTERIES BEFORE FIRST USE- Batteries should be fully charged immediately when they are received and immediately after each use for the recommended charge times (see below) . . LiHon (Lithium Ion) batteries 4-6 hours (2-3 hours for Via Urbano)

We recommend that you consult a bicycle specialist if you have doubts or concerns as to your experience or ability to properly assembly, repair, or maintain your bicycle.
Additional warning/cautions are in the assembly section of this manual
With proper care and maintenance your Currie Technologies@ Hybrid Electric Bicycle will provide ease of use and be fun to ride.
Below are points that will help you to maximize the enjoyment you get from your new hybrid electric bicycle

FACTORS TO MAXIMIZE THE RANGE OF YOUR HYBRID ELECTRIC BICYCLE

• Ride R input -the more the rider pedals the further the distance traveled. Continuous riding, as opposed to frequent stopping and starting. will yield the greatest range possible
• elevation Gain -the flatter the road the further the distance traveled
• Weathe R-cold weather can adversely affect the battery capacity
• Wind -traveling with a tailwind will increase distance traveled, traveling into a headwind will decrease distance traveled
• teRRaln -the smoother the terrain (roadways vs. fire roads, etc.) the further the distance traveled
• Ride R WeiGht -the lighter the rider, resulting in less drain on the batteries, the further distance traveled
• Bicycle Maintenance- a properly maintained bicycle will yield the greatest range possible
• tiRe pRessu Re -properly infiated tires have less rolling resistance and will be easier to pedal
• Batte Ries- properly charged and maintained batteries will yield the greatest range possible. Batteries stored in cold areas (below 50 degrees Fahrenheit/ 10 degrees Celsius) will show reduced range. Batteries that have not een kept in optimum condition will show reduced range and run time.

HEMES SAE LWESI

CORRE CTFITT- MAKE SUREYOUR HELMECOVERSYOURFOREHEAD.

INCORRECT EXPOSED SERIOUS FITTING. FOREHEADIS AND VULNERABLETO INJURY.

Product Description

| Riding Mode| Electric Power Assist (5 Shifts)
---|---|---
Pure Electric (5 shifts)
Pure Human Riding
CRUISE Colterol SYSTEM:
Pure electric riding mode, during riding process (turn rotatable grip + long press – button for 5 seconds) to enters cruise mode (instrument display Cruise sign).Brake cancels cruise.

(Cruise mode need to be used in good road condi lions, with few pedestrian and vehicles on the road)

Kate: For the normal use of each function, please ensure that the led panel works.

Switch on and off: Long press power button for five seconds to turn the meter on/off, quick press power
button to check solo/total mileage
Switch Speed Grade: press the+/- button to switch the speed grade
0 grade instructions:
At O grade mode , at this time , the motor doesn’t work when you turn throttle grip , and the human riding has no electric power.

Speed Grade 1-5 ins true tion:

Speed Grade 1-5, turn the throttle grip, the motor works, and PAS starts at the same time. At this time,
different assist and speed are matched according to the selected speed grade.

Installation Instruction

The Carton of the E-bike.

Open the Carton

Take the bike and accessories out

Remove the packing EPE pearl cotton

Turn the stern forward. Do not turn the whole fork.

The fork brace should be facing forward.

Remove the 1 bolts

Fit the stern and handlebar together

Tighten the 1 bolts

Tighten the bolts

Handlebar installation completed

Install the lights and front fender

Prepare the lights and mudguards

Align the fender and light together

Insert the bolt into both holes simul timeously

Tighten the 1 bolts

Turn the bike upside down

The fork spacer and brake caliper spacer

Remove the fork spacer. ( it is not a part of the bike)

Put the front wheel on the fork

The axle of the motor goes into the groove of the fork.

Put the washers in the right places

Tighten the nets on both sides

The pedal with letter l should be fixed on the left

Turn spanner center clockwise to fix the pedal L

The pedal with letter II should be fixed on the right

Turn the spanner clockwise to fix the pedal R

Put the battery on the battery base

Push the battery downward and lock it

Side view of the completed e-bike

Turn on the Starter Key

Press button M for 3 seconds to turn on display

Press button A or v can change speed grade.

The power assisted mode match with the gear shift to achieve the riding experience of labor-saving and power saving.

In the setting of power assist riding, on few slopes and good road conditions, it is recommended to match with variable gears, 7-6 high-speed gears, with the best power-saving effect and speed ratio.

In case of large slope road conditions, gear 4-7 is adopted, which can easily and effortlessly climb the slope.

Riding with power assisted mode , if use speed shifting & climbing mode on flat road will waste electric power and accompany with the feeling of empty treading.

Maintenance and use skills of electric bicycle.
The maintenance methods of electric bicycle under different use conditions mainly include the following points.

Influence of temperature

Temperature has an impact on the use of lithium batteries. Generally speaking, the impact on the use of lithium batteries at room temperature is not significant, but when the temperature is higher than 40°C or lower than-10°C, the discharge capacity of lithium batteries will change.

For example, if the temperature is below 0°C in winter, the effect will be affected. When the battery is fully charged, the driving mileage will be shortened, because under this condition, the battery capacity can only be released by 60% -70%. Therefore, the driving mileage when the battery is fully charged in winter will be much less than in summer.

Maintenance method.

A, When the temperature is low in winter, the battery should be placed indoors, and the charging should also be carried out indoors. After the battery is fully charged, the charging time should be extended for another two hours.

B, In summer, avoid the sun exposure of batteries. Avoid charging the battery at high temperature. Avoid charging the battery immediately after use in high temperature. Do not charge for too long. The battery needs to be charged for another one or two hour after the red indicator turns green.

Use on different road conditions

E-bike is not suitable for driving on the road with bad or steep conditions. If there are many uphill on the way , we will find that the mileage of charging once will be much less than that on the flat road. When starting, uphill, loading or driving against the wind, please use the motor drive combined with human pedal to ensure the working life of your battery and motor be longer.

Avoid exposure to the sun and rain. Although the electric bicycle has good waterproof performance, it can still ride in rainy and snowy weather, but when passing through water puddles and ponding and other roads, pay attention to the wading height, which shall not be higher than the motor, so as to prevent the motor from damage caused by water inflow. Do not use a high-pressure water gun to wash the electric bicycle, so as to avoid damage caused by water entering the electronic parts and accessories.

Frequent braking is bound to be accompanied by frequent start-up, which will lead to frequent large current discharge and power cut-off of the battery, which has a certain impact on its life. Countermeasures: pay attention to safety when driving, drive at a proper speed, and try to avoid frequent braking.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>