Haylou X1 Earbuds Instruction Manual
- June 5, 2024
- Haylou
Table of Contents
Haylou X1 (IOS) Video
Haylou X1 (Android) Video
How to Pair
When the earbuds are in the charging case:
- Open the lid to automatically power on.
- Open device Bluetooth.
- search for ” Haylou X1″ and C lick to connect.
If connection fails, Put earbuds back into case and try again
Re-connection
1. Put the earbuds back into the charging case to power off and charge.
2. Open the charging case, They will automatically Re-connect to the Last- paired device (Bluetooth needs to be turned on).
ODE
1. Pick up two earbuds to automatically enter stereo mode.
2. Push one back to enter mono mode. or, You can pick it up again to resume stereo mode
Music Control
When playing music:
1. Tap any earbud once: Play/pause
2. Tap the L earbud twice: Skip to previous track
3. Tap the R earbud twice: Skip to next track
Wake up Voice Assistant
When standby: Triple Tap left earbud
Turn on low latency mode
When standby: Triple Tap right earbud
Switch ANC Mode
Long press either earbud’s MFB button for 4s
Answer/End Call
When there is incoming call: Tap any earbud once to answer/end the call
Factory Setting
1. Put both earbuds back into the charging case and make sure that the
charging case has sufficient power.
2. Long press the lest and right touch panels 10s at the same time.
3. Clear Bluetooth pairing record of the device.
4. After reset is complete, Connect again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>