My ReadyClean®/PowerEase® Upright Carpet Cleaner has No Spray | Support
- June 7, 2024
- Bissell
Table of Contents
If you appear to be experiencing No/Low Spray, follow these steps to
resolve:
-
Does your machine have a hose?
- Yes > Go to No Spray to Hose
- No > Turn off and unplug machine
-
If the handle is not fully extended the machine will not spray
- To extend the handle, twist blue collar to unlock position
- Pull the handle upward to extend completely
- Twist blue collar to lock (to keep handle fully extended)
- Handle should be about 5 inches above the collar and try to twist the collar to lock the handle in place
- If you’re having difficulty, try to slowly adjust the handle by lowering it or extending it up while twisting the collar to lock the handle
-
Check that there is no damage to the solution tank or the dirty water tank
- If damaged, replace tank > Go to Parts & Supplies
-
Fill water tank with solution
-
Squeeze the trigger on the handle as the tank is reinserted, holding the trigger for 15 seconds
-
Inspect the screws on the back of the upper handle and make sure they firmly in place
-
Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>