BOSII M2 Portable Triple Screen Laptop Workstation User Manual
- June 1, 2024
- BOSII
Table of Contents
BOSII M2 Portable Triple Screen Laptop Workstation User Manual
Packing List
- HOST **Item 1
**
-
HDMI to MINI HDMI Item 2
-
USB-C to USB-C x2 **Item 3
**
- POWER **Item 4
**
- HUB **Item 5
**
These Ports You Need to Know
Key Definitions
Menu/Selection/Confirmation Button
Press and hold for 2 seconds to return. Press and hold for 3 seconds to shut
down
Toggle right “Plus” Volume Adjustment
Toggle left “Minus” Backlight Adjustment
Operation Steps
The maximum opening angle of the screen is 340°. It is strictly prohibited to fold it excessively. Please open and close it gently.
To open the stand, you can adjust it to a maximum angle of 135°.
How to Connect
TYPE-C Connection:
If your laptop has one full-featured Type-C port, you can connect the M2
directly to your laptop with one Type-C cable.
HDMI Connection: If your laptop has an HDMI interface, you can connect
the M2 to your laptop using an HDMI cable. To power the M2, you can use a
USB-C to USB-C adapter and connect it to the M2.
Note : When using an HDMI connection, the content will only be displayed
on the primary screen.
Notice: If the display has no signal or the signal is unstable after
connection, please connect an external 12V/1.25A power adapter to power the
laptop
HUB Connection
If your device is a computer with M1/M2 chips, you will need to connect the
dedicated M2 model hub to activate both screens. Please follow the steps
below:
please follow these steps :
- Connect the HUB to the M2 using the Type-C and Mini HDMI interfaces.
- Use aUSB-C to USB-C cable to connect your computer’s Type-C interface.
- Use a USB-C to USB-C cable to provide power to the product through the adapter.
- Locate the “USM USB display” driver installation file on your computer and follow the prompts to install the driver. Once the installation is complete, both screens light up.
Note: The USB/Type-C interface on your computer must meet or exceed the USB 3.0 transfer rat.
Q&A
Q1: How can I tell if the USB-C port on my computer is full-featured?
A1: A USB-C port with one of the following symbols is a full-featured one.
Thunderbolt 3 or Thunderbolt 4 ports are also full-featured ports. You can
view the port parameters in the manual or on the Web.
Q2: Why does one monitor show ”No Signal” ?
A2: There may be a connection failure or the computer port does not support
video output. Please contact us for troubleshooting. We will provide you with
a solution as soon as possible!
Q3 The screen does not light up after connecting?
A3: It is possible that your computer does not have enough power. Please
charge the monitor with an external power supply that provides 5V/2A power.
You can also contact us for further solutions
Tips for Use
Please refer to the pictures below to plug and unplug the data cable to avoid
damage.
For more detailed information, please refer to the product brochure.