tp-link TX20U Nano Wireless USB Adapter Installation Guide
- June 1, 2024
- tp-link
Table of Contents
tp-link TX20U Nano Wireless USB Adapter
Product Specifications
- Product: Wireless USB Adapter
- Manufacturer: TP-Link
- Interface: USB 2.0
- Wireless Standard: IEEE 802.11b/g/n
- Security: WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Operating Systems: Windows XP/Vista/7/8/10, Mac OS, Linux
Product Usage Instructions
Connect to a Computer
Ensure the Wireless USB Adapter is plugged into an available USB port on
your computer.
Install Driver
- Open My Computer or This PC on your computer.
- Insert the TP-Link CD-ROM that came with the adapter.
- Run SetupInstall.exe to install the driver. Follow on-screen instructions.
- You may need to provide your Windows administrator account credentials during installation.
Join a Wireless Network
- Click on the network icon located on the taskbar.
- Select your Wi-Fi network from the list and click “Connect”.
- Enter the password for the network when prompted.
Troubleshooting
If you encounter any issues during installation or connection, please refer
to the troubleshooting section in the manual or visit the manufacturer’s
website for support.
Connect to a Computer
Install Driver
- a. Go to My Computer or This PC.
- b. Double click the TP-Link CD-ROM then run SetupInstall.exe to install driver.
Notes:- If you cannot find the setup program, please download the driver at www.tp-link.com/support.
- If an unknown publisher message pops up, select Yes to continue.
- If Windows User Account Control requires admin credentials, type user name and password of your Windows administrator account.
Join a Wireless Network
- a. Click the network icon on the taskbar (the icon might look like one of these:
- b. Select your Wi-Fi network, click Connect and enter the password when prompted.
Troubleshooting
If you have problems during the installation, please refer to the following
online FAQs.
T1. Can’t find the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can’t find or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can’t install the driver:
https://www.tp-link.com/faq-2252.html
Safety Information
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use the device where wireless devices are not allowed.
- Keep the device away from water, fire, humidity or hot environments.
- This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source(LPS) of IEC 62368-1.
- TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011 /65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at: https://www.tp- link.com/en/support/ce
- TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
- The original UK Declaration of Conformity may be found at: https://www.tp-link.com/support/ukca
Support
For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
Images are for demonstration only.
©2024 TP-Link 7106511083 REV1.2.0
References
- TP-Link Product Support - Wireless Networking Equipment Support
- CE Regulatory Compliance | TP-Link
- Difficulties Experienced While Installing a TP-Link Wireless Adapter
- Why cannot I connect to my wireless network | TP-Link
- How to find the hardware version on a TP-Link device
- Regulatory Compliance | TP-Link