Zana A1 Wall Mounted Bath Shower Mixer Instruction Manual
- June 1, 2024
- Zana
Table of Contents
A1 Wall Mounted Bath Shower Mixer
Product Information
Specifications
- Product: [Product Name]
- Finishes: Durable
- Warranty: Check warranty details provided
Product Usage Instructions
Maintenance and Cleaning
The finishes of our products are durable. To keep the product in
good condition, regular maintenance and cleaning are required.
Follow the guidelines below:
- Use a soft, damp cloth to wipe the surfaces.
- Avoid using harsh chemicals or abrasive cleaners.
- Dry the product thoroughly after cleaning.
Care Instructions
When installing, using, cleaning, and maintaining the product,
please handle it with care to avoid any defects or damages that may
not be covered by the warranty. Common issues like peeling can be
prevented by:
-
Avoiding excessive force during installation.
-
Regularly inspecting the product for any signs of wear or
damage. -
Following the recommended cleaning instructions.
FAQ
Q: What should I do if I notice peeling on the product?
A: If you notice peeling on the product, stop using it
immediately and contact our customer support for further
assistance. Peeling may indicate a defect that needs to be
addressed promptly.
Q: Can I use bleach or strong chemicals to clean the
product?
A: No, it is not recommended to use bleach or strong chemicals
as they may damage the finishes of the product. Stick to mild
cleaners and a soft cloth for regular cleaning.
Maintenance/ Care and Cleaning Instruction
Maintenance and Cleaning Instructions The finishes of our products are
durable. To keep our products in good condition, the end users are required to
regularly maintain and clean all the surfaces based on the following
guidelines:
· Warm water or mild soapy water should be used to remove system debris and
limescale. · After cleaning, all soapy water should be removed by water and
polished with a clean, soft and dry cloth. · No abrasive cleaning agents or
materials should be used. · No corrosive cleaning agents should be used, which
will cause corrosion. · More care should be taken in hard-water areas to
ensure all the surfaces are regularly cleaned. · Failure to do so will
invalidate the product warranty.
Care Instructions Please be careful when installing, using, cleaning and
maintaining this product. Any defects or damages like peeling problem at this
product due to the following reasons is not covered by the product warranty:
· incorrect installation. · accidental or wilful misuse. · inappropriate
cleaning products. · inadequate maintenance. · chemical damage caused by
system debris and build-up of limescale (any soapy water left on the surface
of the product and not cleaned
regular will affect the finish of the product.) · physical damages like
scratches. · damage caused during repair work. · water quality i.e. rusting
water from the pipework need to be fully flushed out after use or water
pressure issues.