PARLOS Widespread Bathroom Faucet Installation Guide
- June 3, 2024
- PARLOS
Table of Contents
Widespread Bathroom Faucet
Installation Guide
BEFORE INSTALLATION
- To insure proper installation, please read the following instructions carefully.
- Please make sure that the water supply has been shut off at the stop valve.
- Parlos reserves the right to update product without notice.
If you have any question or need help, please visit website http://www.parlos.com
-
Place the Spout in center hole of sink.
Secure it with washers and lock nut.
Note: If sink is uneven, use silicone under the gasket. -
Attach each handle with a washer and a threaded ring.
Ensure the handles are in the OFF position.
Align the handles as shown. -
Align spout tube①, outlet tubes on quick② connect hose ③.
Push quick connect hose ③ firmly upward and snap onto tubes ① & ②.
Pull down moderately to ensure each connection has been made.
-
Connect To Water Supplies.
-
Turn on the water supplies.
Check all connections for leaks.
Installation Requirements
Max deck thickness: 1.57 Inches
NOTES:
- Fits for sink WITH overflow hole.
- Clean the sink hole, make sure to remove debris.
Please avoid using plumber’s putty.
The seal on top is leak-free.
Plumber’s putty might cause damage.
Silicone and plumbing tape can be use for sealing requirement.
-
Unscrew components A & B to the seal.
-
Slide the drain body C through the hole in the sink.
-
Screw components A & B back on as shown.
-
Connect the rear end of the drain to the Drain Pipe.
-
Push to activate.
If you have any question or need help, please visit website http://www.parlos.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>