Zana CHSQBOTTRAP Chrome Square Exposed Bottle Trap Installation Guide
- June 1, 2024
- Zana
Table of Contents
Zana CHSQBOTTRAP Chrome Square Exposed Bottle Trap
ASSEMBLY INSTRUCTIONS
Note: Please be advised that no abrasive agents or materials can be used for cleaning this product, otherwise Warranty will be invalid!
- Assemble nut ( C ) onto the plated metal tube ( B ) under the top flange with the wide end facing upwards to receive the waste assembly. Slide the knurled nut ( D ) over the plated tube, with the wide end facing down.
- Push the plastic sleeve ( F ) into the top of the bottle trap main body ( H ) ensuring the lip seats on the neck of the trap. Insert the metal tube into the centre of the plastic sleeve and lock the knurled nut ( D ) into position
- This trap is designed to connect to standard H/4″ metal waste pipe. slide the nut (E) and tapered washer ( G ) over the waste pipe as shown. Insert pipe into the trap outlet and tighten the nut.
- When fitted onto a basin waste outlet the washer (A) must be placed inside the nut(C) to form a seal between the trap and waste.
COMPONENTS
- (A) Flat Washer
- (B) Plated metal tube
- (C)-(E) Nuts
- (F) Plastic Sleeve
- (G) Tapered Washer
- (H) Bottle Trap Body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>