Hama Travel 450 Bluetooth Keyboard User Manual

June 1, 2024
Hama

XX 125136
Bluetooth®
Keyboard“TRAVEL 450”
Bluetooth® -Tastatur

Hama Travel 450 Bluetooth Keyboard

Operating Instructions

Travel 450 Bluetooth Keyboard

Hama Travel 450 Bluetooth Keyboard - Fig 1 Controls and displays
A Display and control panel

  1. [CONNECT] button

  2. [OFF/ON] switch

  3. Status LED charge indicator

  4. Bluetooth® connection status LED /lock button
    B Charging device

  5. USB-C socket
    Thank you for choosing aHama product.
    Take your time and read the followinginstructions and information completely.Please keep these instructions in asafe place for futurereference. If you sellthe device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Explanation of symbols used on the product label

  • The power of the charger must range from aminimum power of 1.0 watt required by the radio system to a maximum power of 1.0 watt required to achieve the maximum charging speed.
  • The standardised USB interface means that acharger with ahigher output power can also be used.

Package contents

  • “Travel 450” Bluetooth® keyboard
  • USB-C charging cable
  • These operating instructions

Safety instructions

  • The product is intended for private, non-commercial use only.
  • Protect the product from dirt, moistureand overheating and use it in dry environments only.
  • Do not use the product in areas in which electronic products arenot permitted.
  • Do not use the product in adamp environment and avoid splashing water.
  • Do not drop the product and do not expose it to any major shocks.
  • Never apply force when using the product or during installation.
  • The battery is permanently installed and cannot be removed; dispose of the product as awhole in accordance with the statutory regulations.
  • Dispose of packaging material immediately in accordance with the locally applicable regulations.
  • Do not modify the product in any way.Doing so voids the warranty.
  • Do not incinerate the battery or the product.
  • Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

System requirements

The keyboardsupports Bluetooth® -enableddevices with the iOS,iPadOS,MacOS,Android and Windows operating systems.
The following requirements must be met to enable its use:

  • iPaddevices requireiPadOS 14 or higher
  • iPhone devices requireiOS 14 or higher
  • Android devices requireAndroid 8.0 or higher
  • Windows devices requireWindows 10 or higher
  • MacOS 11 or higher

Check whetherthe latest version is installedand carry out asoftwareupdate if necessary.

Note

  • For proper functioningofthe multi-device keyboard, make surethat the correct keyboard layout (QWERTZ, QWERTY,etc.) is activated in the settings of your device.
  • Please be awarethat your device must support some functions if they aretobeused.
  • If some of the keys of the multi-device keyboard do not function properly on your device due to software, you can execute them via the virtual keyboard.
  • Please refer to the operating instructions of your device for more information.

Setup

Warning -rechargeable battery

  • Only use suitable chargingdevices or USB ports to charge the product.
  • Do not use defective chargers or USB ports and do not attempt to repair them.
  • Do not overcharge the product or allow the battery to completely discharge.
  • Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
  • When stored over alongperiod of time, batteries should be charged regularly (at least every three months).
  • Only charge batteries within atemperaturerange of 10°C-40°C.

Note

  • The enclosed USB cable is only used for charging this product. It is not suitable for charging other devices or for transferring data.
  • Fully charge the battery of theBluetooth® keyboard once beforeusing it for the first time.
  • Start the charging process of the Bluetooth® keyboard by connecting the enclosedUSB-C charging cable to the USB-C socketofthe keyboard(5) and to the USB port of aPC/note book.
  • Alternatively, you can charge the Bluetooth® keyboard using asuitable USBcharger.Todothis, consult the operating instructions for the USBcharger youare using.
  • The charging status LED (3) lights up redwhen charging is active. Once the battery is fully charged, the charging status LED (3) goes out again.
  • If the battery capacity is low,the charging status LED (3) starts to flash redduring operation. Then charge the battery of the Bluetooth® keyboard(5) as described above.

Operation

Note

  • The functions described in this section areonly possible with Bluetooth® -enabled devices.
  • Note thatthe maximum range for Bluetooth® is 10 metres without obstacles such as walls, people, etc.

7.1 Bluetooth ® initial connection (pairing)
Note -pairing

  • Make surethat your Bluetooth® -enabled device is switch on and that Bluetooth® is activated.
  • Make surethat your Bluetooth ® -enableddevice is visible to other Bluetooth® devices.
  • Please refertothe operating instructions of your device for more information.
  • Slide the OFF/ON switch (2) to the ON position to switch on the Bluetooth® keyboard. The Bluetooth® connection status LED (4) lights up once.
  • Press and hold the Connect button (1)until the Bluetooth® connection status LED (4) starts to flash blue continuously.The keyboard searches for a Bluetooth® connection.
  • Open the Bluetooth ® settings on your device and wait until the list of found Bluetooth ® devicesshows Hama Travel 450.
  • Select Hama Travel 450,follow the instructions of your end device if necessary and waituntil the keyboard is displayed as connected in the Bluetooth® settings of your device. The Bluetooth® connection status LED (4) goes out.
  • You can now use the Bluetooth® keyboard.

7.2 Automatic Bluetooth® connection (once pairing has been performed)

Note

  • Make surethat your Bluetooth® -enabled device is switch on and that Bluetooth® is activated.
  • Make surethat your Bluetooth® -enabled device is visible to other Bluetooth® devices.
  • Please refer to the operating instructions of your device for moreinformation.
  • Slide the OFF/ON switch (2) to the ON position to switch on the Bluetooth® keyboard. The Bluetooth® connection status LED (6) lights up once.
  • You can now use the Bluetooth® keyboard.

Note -connection impaired
After asuccessful initial pairing, the connection is established automatically. If the Bluetooth® connection is not established automatically,check the following:

  • In your device’s Bluetooth ® settings, check whether Hama Travel450 is connected. If not, repeat the steps described in 6.1. Bluetooth ® initial connection.
  • Check whether obstacles areimpairing the range. If so, move the devices closer together.

7.3 Operating system change
The Hama Travel 450 keyboardsupports three different operating systems. Youcan select the desiredoperating system with the following key combinations:

  • fn+Qfor Android
  • fn+Wfor Windows
  • fn+Efor Apple iOS,iPadOS,MacOS

7.4 Multimedia keys
The multimedia keys allow direct quick access to various applications and functions, whichyou can use with the key combination of Fn and the respective multimedia key.

Note
Possibly limited usability with the Android, iOS, iPadOS and MacOS operating systems.

7.5 Standby and switchoff

  • The keyboard automatically switches to standby mode if it is not used for morethan 10 minutes.
  • Press any key to reactivate the keyboard.
  • Move the OFF/ON switch (2) to the OFF position to switch the Bluetooth® keyboardoff.

Care and maintenance

  • Only clean this product using alint-free, slightly damp cloth and do not use any harsh cleaners. Ensurethat no water is able to enter theproduct.

Warranty disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failuretoobservethe operating instructions and/ or safety notes.

Technical data

Bluetooth® version 5.0
Range Max. 10 m
Dimensions Unfolded:

Width: 29.5 cm
Depth: 9.1 cm
Height: 0.8 cm
Folded:
Width: 14.8 cm
Depth: 9.1 cm
Height: 1.7 cm
Numberofkeys| 66 incl. 11 media keys
Current consumption| 5V ****135 mA
Battery type| 3.7 VLi-Po
Typ. capacity| 200 mAh /0.74 Wh
Operating systems| iOS, iPadOS, MacOS, Android, Windows

Declaration of conformity

**** Hama GmbH & Co KG hereby declares that the radio equipment type [00125136] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
https://uk.hama.com 00125136 Downloads

Frequency band(s) 2402 -2480 MHz
Maximum radio-frequency power transmitted 0.59 mW EIRP

Hama GmbH & Co KG
86652 Monheim /Germany
Service &Support
****www.hama.com
+49 9091 502-0

hama 77125138 Multi Device Keyboard With Cover - Symbol
6

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners.
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals