IRON DISPLAYS 8ft W x 7ft 8 Inch Fabric Displays Instruction Manual
- June 1, 2024
- IRON DISPLAYS
Table of Contents
8′ Tension Fabric Displays: Assembly Guide
Included Pieces
- Top Corner Poles (x2)
- Top Pole
- Bottom Pole
- Bottom Corner Poles (x2)
- Left & Right Poles (x2)
- Fabric
- Vertical Middle Pole (4 pieces)
- Feet (x2)
- Plastic Hinge Connector
Instructions
STEP 1: Remove all pieces from your included carrying case and place on a
clean, flat surface. Make sure you have all the pieces listed above.
STEP 2: Assemble all the poles by connecting the corresponding numbers
together while pressing the snap button as shown below.
STEP 3: Continue to connect the poles as illustrated in the
image below. STEP 4: Snap the completed frame into the feet, then drape
the fabric over the connected poles.
Using more than 1 display?
To connect 2 displays together, use the plastic hinge connector. Just clip it
on to a side pole and connect it to the other display’s side pole.
Storage & Care
To store your tension fabric display, put all the product pieces into the
carrying case and place in a cool and dry indoor location. You can machine
wash the fabric on your gentle cycle using mild detergent. We recommend tumble
drying with no heat. Don’t dry clean or iron.
Assembly Guide: Tension Fabric Displays
Documents / Resources
| IRON
DISPLAYS 8ft W x 7ft 8 Inch Fabric
Displays
[pdf] Instruction Manual
8ft W x 7ft 8 Inch Fabric Displays, 8ft, W x 7ft 8 Inch Fabric Displays,
Fabric Displays
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>