SOTEN TECHNOLOGY X70 Rugged Tablet User Guide

SOTEN TECHNOLOGY X70 Rugged Tablet

• www.soten.com.cn

Manual
Please read the instructions first.

Thank you for using our reinforced tablet computer. This tablet computer is built on the foundation of the Google Android operating system.

• Please read all safety precautions and this manual carefully before using the device to ensure safety and correct use.
• The description in this manual is based on the Default Setting of the device.
• The images and screenshots used in this manual may differ from the actual appearance of the product.
• The contents of this manual may differ from the product, service provider or software provided by the service provider. Subject to change without prior notice.
• Available features and additional services may vary by device, software or service provider.
• The format and information in this manual are based on the Google Android operating system, which may be different.
• Applications and their functions may vary by country, region, or hardware specification.
• We are not responsible for performance issues caused by third-party applications.
• We are not responsible for performance issues or incompatibilities caused by editing registry Settings of customers.
• The sound sources, wallpapers and images provided in this equipment are licensed for limited use by us and their respective owners. The use of these materials for commercial or other purposes is a violation of copyright law. We are not liable for such copyright infringement by our users.
• Additional charges may be incurred for sending and receiving messages, uploading and downloading, automatic synchronization or using location services. To avoid the additional charges, choose the right data charging plan. Contact your service provider for more information.
• Please keep this manual for future reference.

Accessories

Comes with the Google ™ app and Google Chrome ™. Android is a trademark of Google LLC.

Battery

The device has a built-in battery. You can track your battery using the icon displayed at the top right of the screen.

Warning

• Use only a safety-certified battery designed specifically for your device.
• Battery incompatibility can cause serious injury or damage to the device.
• Never place battery or device on heating equipment s such as microwave ovens,
• stoves or radiators. An overheated battery may cause an explosion.

Comes with the Google ™ app and Google Chrome ™ . Android is a trademark of Google LLC.

How to insert the card

For more comprehensive protection of SIM card, the product uses a built-in SIM card slot design to prevent damage. The card slot should always be inserted or removed after the power is turned off. This machine uses a Nano SIM card, please be sure to confirm before inserting the card. In particular, the expansion storage TF card must be installed in the shutdown state, otherwise it may cause system problems.

Turn off the power > Open the protective card cover > Place the device with the front screen facing up > Insert a SIM card pin into the small hole of the card slot > Remove the card slot > Place the Nano SIM card and TF storage card, making sure the beveled corner aligns with the beveled corner of the card slot > Push the card slot back in > Close the protective card cover.

How to boot

• A non-removable battery is installed inside the device.
• Long press the power button for 3-5 seconds to start.

How to send SMS, MMS

SMS

• Open the SMS app
• Select new information
• Enter your phone number or browse your contacts
• Select edit information and enter your text
• Send

MMS

• When writing text messages, choose to add images, videos or other files you want to add, or even take new photos or videos right away.
• Select or send

Language switching settings

• Main menu –settings-system setting–language and input method
• Language and input method–language–language adding
• Select the language you need, the system will automatically jump back to the language interface
• Select the icon after the language bar and drag it to the first one.

Safety

• The maximum electromagnetic radiation absorption ratio(SAR) of this product is <2.0W/kg
• In line with the requirements of the national standard
• EN 50360:2017; EN 50566:2017; EN62209-1:2016;
• EN 62209-2:2010; EN 62479:2010;

SAR

To ensure safe use of the product, you must strictly abide by the following rules.

• The device should be at least 15 cm away from any medical implant or adjuster and should never be carried in your coat pocket.
• Don’t expose this device and other batteries to high-temperature or heating equipment such as sunlight, heaters, microwaves, ovens or water heaters. An overheated battery may cause an explosion.
  • When charging is complete or not, the charger should be disconnected from the device and removed from the power outlet. Don’t charge the device in an explosive environment.
• The device is equipped with a non-removable battery. Don’t replace the battery by yourself to avoid damaging the battery or the device.
• Use of unapproved or incompatible power supplies, chargers or batteries may cause fire, explosion or other hazards. We are not responsible for any accident caused by non-standard charging equipment.
  • Don’t drop, crush, scratch, or pierce the battery. Otherwise, it may be subjected to excessive external pressure, resulting in internal short circuit and overheating.
• Don’t remove or reset the battery, insert other objects and soak in water or other liquids.

Precautions for battery maintenance

• When the device is not in use for a long time, the battery capacity shall not be lower than 80%, especially when it is stored in low temperature in winter, and a complete charge and discharge shall be carried out once a month.
• When the battery is lower than 30%, charge it in time. The charging time is generally 4-8 hours. When the charger is not in use, remove it from the power socket.
• Don’t connect a permanently charged battery to a charger, as overcharging can shorten battery life. Please handle the device gently when charging and wiring data transmission. Don’t operate the device at this time except under special circumstances to avoid short circuit of the socket and damage to the control chip.
• Don’t charge the device in a damp, flammable or explosive environment. Reasonable charge and discharge can prolong battery life.

Additional notes

• Fully understand the maintenance of the device to use it more safely and efficiently, and extend the service life of the device as far as possible.
• Please follow the instructions in the manual to open the device, remove the accessories, and don’t try other methods.
• Please avoid falling, knocking or shaking the device. Rough handling of the device can cause the screen to crack, damaging internal circuit boards and fine construction.
• Do not use chemical solvents or detergents to clean your equipment. Wipe the outer casing with a soft cotton cloth dampened with water or mild soap.
• Clean lenses (e.g. camera lenses and screens) with a clean, dry and soft cloth.
• If an abnormal fault such as a collision occurs during the use of the device, the solution is as follows: press the power button for more than 12 seconds. The device forcibly restarts (unlocking the device upon restart).
• The touch screen of the device can be used normally in air and fog environments, but the sensitivity will be reduced in rain and snow environments.
• Don’t use the device in heavy rain or snow except under special circumstances.
• After using the device in rainy or snowy weather, remove water on the surface and dry it in a cool place.
• In a strong light working environment, change the automatic brightness adjustment to manual brightness adjustment and maximum brightness adjustment. After the maximum brightness adjustment, there will be obvious heating and the working life will be significantly shortened. Please adjust the brightness of the display properly.
• The standard package includes (M12 to DC+RS232 Cable, TYPE-C Data Cable, External GPS Antenna, Magnetic Charging Cable, Card Tray, Card Ejector Pin, User Manual, Screen Protector, and Heaven and Earth Box).

Declaration of conformity

СЕ

• Use the Rugged tablet in an environment with a temperature between0°C and 40°C, otherwise, it may damage your Rugged tablet. It can be operating under 2000m.
• Declaration of conformity
• Hereby, Shenzhen SOTEN Technology Co., Ltd declares that the radio equipment type Rugged tablet complies with Directive 2014/53/EU.
• The product shall only be connected to a USB interface of version USB2.0 or higher and the connection to a power USB is prohibited.
• The maximum results of SAR as follows: Body-worn (with 0mm separation): 1.118W/Kg limbs (with 0mm separation): 1.118W/Kg

For EU:

• Ope ra ting Frequency Range
  

  • The maximum RF Output Power

• GSM 900 / 1800
  

  • Max. 2 W / Max .1 W

• UTRA FD D Ba nd I / VIII
  

  • 0. 25W

• E- UTRA FDD Ba nd 1 / 3 / 7 / 2 0
  

  • 0.2 W

• BT 2 402 – 2 480 M Hz
  

  • 5 .9 8 dBm

• WiFi 241 2 – 247 2 MHz
  

  • 16.02 d Bm

• GPS 1 575.42 MHz
  

  • /

• GLONA SS 160 2 MHz
  

  • /

• BDS156 1. 098 MHz

  • /

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• * Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information:

• FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the Body with the minimum separation distance of 0mm.
• This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
• This product is compliance to FCC RF Exposure requirements and refers to the FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for

FCC ID: 2A162-X70.

Product Information

Specifications

• Model: XQ7U0ICrKuSgTgAeRdTtGaUbIDl eEt
• Technology Group : www.soten.com.cn
• Main Features: Sub Camera, Light sensor, Indicator lamp, Power Button, Back Button, Home Button, Setup Button, Type-C port, Volume Up/Down buttons, SIM Card slot
• Battery: 13000mAh Polymer battery

Frequently Asked Questions (FAQ)

How do I check the battery status?
The battery status can be tracked using the icon displayed at the top right of the screen. Ensure to charge the device when the battery is low.

Can I use a different type of SIM card?
No, this product uses Nano SIM cards. Using a different type may cause compatibility issues.

References

• SOTEN, Brand story, About us, industrial, rugged tablet, barcode scanner, rugged pda

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>