GERMiD YVL-096AWF-FHD 9.66-Inch 1080P Streaming Media Mirror Monitor With Built-In Dash Cam User Manual
- June 5, 2024
- GERMiD
Table of Contents
GERMiD YVL-096AWF-FHD 9.66-Inch 1080P Streaming Media Mirror Monitor With
Built-In Dash Cam
PACKAGE
The package contains the following:
For the items listed above, please check your packing contents. If any damage, please contact the distributor or the agent as soon as possible.
FEATURES
- Front recording 1080P
- Rear recording 1080P
- 9.66 inch full display screen
- Touch screen button
- Wi-Fi connection
- Parking mode
- Time lapses video
- Night mode
- LCD power save
- G-sensor
- Super Capacitor
- Real-time view on app
- Waterproof rear camera
- Back up camera display
SPECIFICATIONS
BASIC OPERATING INSTRUCTIONS
NOTED: The touch area of the keys is not on the glass screen, but on the plastic frame below the key icon.
HOW TO WIRE
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Different cars have different brackets. It depends on your vehicle maker and
manufacturer.There are many methods to remove the original rear view mirror,
however, please don’t force the mirror off the bracket.
The manufacturer will not be responsible for damage caused to your car by
wrong installation of the mirror.
Install mirror monitor on the plate
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you are not sure how to remove or re-install the mirror seek trained, qualified help.
CAUTION
MENU SETTINGS
Stop recording, tap the icon “1(:)1” in the main interface to proceed to the menu settings.
- Movie Mode: Can set “FHD30 / HD30”. This setting is only for the front camera, not useful for the rear camera.
- Movie Clip Time: Can set “1 min / 3min/ 5min” .Default 3 minutes.
- Night Mode: Can set “on / off”. When the light is dark at night, turn on this function to increase the sensitivity of the lens and take brighter and higher-quality videos.
- Sound Record: Can set”on /off”. Default On.
- Exposure: Can set “-2 I -1 / O / 1 /2”. The default is 0. This setting is only for the front camera, not useful for the rear camera.
- Video Time Lapse: Can set “Off/ 1 FPS/ 4FPS”.
- Timelapse Rec Time: Can set “2 hours /8 hours /12 hours /24 hours”. Default 2 hours.In “Video Time Lapse option”, select “1 FPS” or “4FPS”. When the car is turned off and the machine is in
- the ACC disconnected state, the machine will prompt to enter the “Timelapse Rec Time”video. When the voltage reaches 11.3±0.1 SV setting, the machine will stop recording automatically to avoid
- car engine can’t start properly because of low voltage. When playing a video, it turns a long video of slow motion into a short video of fast motion, similar to fast forward playback in movies. For
- example, when recording for 1 minute, the video is compressed to 1 second, and the recording for 1 hour is changed to 1 minute to play.
- Protect Level (G-sensor): Can set “Off/ High / Middle/ Low”.
- With G-sensor function, dash camera can automatically save the video as event file when it detects acceleration of gravity changes greatly. For example, when car crash happens. The event file will
- be locked and cannot be overwritten in record cycle mode. It can only be manually deleted one by one or formatted.
- Parking Monitoring: Can set “Off /On”.
- When this function is turned on, when the recorder is shaken when it is turned off, it will start the machine to record for 30 seconds and then turn it off.
- LCD Power Save: Can set “off/ 1 min/ 3mins”.
- After exiting the menu, the mirror will start to count the time once there are no operations. The screen will auto turn off when it reaches the time you set.
- Language: “English / Simplified Chinese/ Traditional Chinese”etc. There are 8 languages.
- Volume: Can set “Off/ High/ Middle/ Low”, default Middle.
- Flicker: Can set “50Hz / 60Hz”.
- Each country has different supply frequency due to geographical reason. Standard frequency of dash camera lens is constant 50Hz. When the supply frequency inconsistent with frequency standard
- the image on the device will appear joggling phenomenon. At this point users should adjust Frequency to consistent with supply frequency.
- Clock Settings: Users can adjust the time and date by themselves, or connect the mirror to the phone via WIFI, the time will be updated automatically.
- Wifi ON/OFF: Can set “On /Off”.
- Format SD-Card: If it’s not necessary to save the videos in card, user can delate all videos (both normal video and event files) by formatting.
- Reset Setup: After making a lot of custom settings,users can reset the device to the original factory settings.
PLAYBACK
Stop recording, tap the icon “li§II” in the main interface to proceed to the playback interface. There are 6 sub-menus. They are: 1. Front-view normal video; 2. Rear-view normal video; 3. Front-view locked video; 4. Rear-view locked video; 5. Front-view picture; 6. Rear-view picture.
- Press “[OJ ” to switch to “Rear View Normal Video”, as shown in the figure below:
- Press”” to select, as shown in the figure below:
- PS: Press and hold ” DJ ” to delete the current video.
- Press ” DJ ” to select and enter the playback interface, as shown below:
MOBILE PHONE APP CONNECTION and OPERATION
Built- in WiFi module system allows to connect mobile phone through Android or 10S APP, please check below for its setup.
- Download” fl RoadCam” APP.
- Turn on the rearview mirror, stop recording, tap the icon “l(‘.)I” in the main interface to proceed to the menu settings. Find “Wifi ON/OFF” by”@” and “0” buttons. Press “m” to choose “ON”. as shown in Figure 1.
- The WiFi account and password are displayed in the lower right corner of the screen, as shown in Figure 2.
- Enter mobile phone interface, turn on Wi-Fi and connect Wi-Fi ID, enter initial password: 12345678, then connect. Please see figure 3
- In Figure 4, click the ” ” icon, the phone and rearview mirror are successfully connected, as shown in Figure 5.
- Once connected, user can check the recording video and operate accordingly.
Click ” ® “to enter the list of recorded videos, Press and hold the file thumbnail to select the file, download the video to the local, delete videos in batches, etc. See the figure below.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>