PHILIPS BDP100 LED50 Pole Light Instructions

: June 1, 2024
: Philips

Table of Contents

PHILIPS BDP100 LED50 Pole Light
Specifications
Product Usage Instructions
Frequently Asked Questions
Product Information
Product data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS BDP100 LED50 Pole Light

Specifications

Product Data

Lamp Family Code: LED50
Light Source Replaceable: Yes
Light Source Engine Type: LED module 5000 lm
Lighting Technology: Value ladder Embedded control
CE Mark: Yes
Warranty Period: Data subject to change
Operating and Electrical
Input Voltage: 220-240 V
Line Frequency: 50 to 60 Hz
Power Consumption: 34 W
Power Factor (Fraction): 0.95
Mechanical and Housing
Housing Material: –
Reflector Material: –
Optic Material: –
Optical Cover Material: Polycarbonate bowl/cover frosted
Housing Color: –
Mounting Device: Post-top for diameter 62 mm
Optical Cover Shape: Flat Cone

Approval and Application

Ingress Protection Code: IP66 (Dust penetration-protected, jet-proof)
Mech. Impact Protection Code: IK10 (20 J vandal-resistant)

Product Usage Instructions

Installation

Ensure the power supply is switched off before installation.
Mount the fixture securely on a post with a diameter of 62 mm.
Make sure all connections are properly secured.

Operation

The product operates on an input voltage of 220-240 V at a frequency of 50 to 60 Hz.
The power consumption is 34 W with a power factor of 0.95.
The product is dimmable with a DynaDimmer control interface.

Maintenance

Clean the optical cover regularly to maintain optimal light output.
Check for any loose connections or damage periodically.

Frequently Asked Questions

Q: Is the light source replaceable in the TownGuide Performer?
- A: Yes, the LED module with 5000 lm is replaceable in this product.
Q: Can the TownGuide Performer be dimmed?
- A: Yes, the product is dimmable using a DynaDimmer control interface.
Q: What is the warranty period for the TownGuide Performer?
- A: The warranty period is subject to change; refer to the latest product information for details.

Product Information

BDP100 LED50/740 II DW PCF SI LS-6 62P TOWNGUIDE PERF FLAT CONE, LED module 5000 lm, Distribution wide, Polycarbonate bowl/cover frosted, LumiStep dimming 6 hours, Post-top for diameter 62 mm The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energyreduction programs. This includes LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.

Product data

General Information

Lamp family code LED50 [LED module 5000 lm]
Light source replaceable Yes
Number of gear units 1 unit
Driver included Yes
Photocell –
Light source engine type LED
Service tag Yes
Product family code BDP100 [TOWNGUIDE PERF FLAT CONE]
Lighting Technology LED
Value ladder Performance
Embedded control LumiStep dimming 6 hours
CE mark Yes
Warranty period 5 years
Flammability mark –
ENEC mark ENEC mark
Glow-wire test Temperature 650 °C, duration 5 s
EU RoHS compliant Yes
Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts

Light Technical

Upward light output ratio 3
Luminous Flux 2,700 lm
Standard tilt angle posttop 0°
Standard tilt angle side entry –
Correlated Color Temperature (Nom) 4000 K
Luminous Efficacy (rated) (Nom) 79 lm/W
Color rendering index (CRI) 70
Number of light sources 4
Light source color 740 neutral white
Optical cover type Polycarbonate bowl/cover frosted
Luminaire light beam spread 50° x 70°
Optic-type outdoor Distribution-wide

Operating and Electrical

Input Voltage 220-240 V
Line Frequency 50 to 60 Hz
Inrush current 45 A
Inrush time 0.285 ms
Power Consumption 34 W
Power Factor (Fraction) 0.95
Connection Screw connection block 5-pole
Cable –
Number of products on MCB of 16 A type B 10

Temperature

Ambient temperature range -40 to +35 °C

Controls and Dimming

Dimmable Yes
Driver/power unit/transformer Power supply unit with DynaDimmer
Control interface –
Constant light output No

Mechanical and Housing

Housing Material Aluminum
Reflector material –
Optic material Acrylate
Optical cover material Polycarbonate
Fixation material Steel
Housing Color Silver
Mounting device Post-top for diameter 62 mm
Optical cover shape Conical flat
Optical cover finish Frosted
Overall length 570 mm
Overall width 570 mm
Overall height 209 mm
Overall diameter 570 mm
Effective projected area 0.051 m²
Dimensions (Height x Width x Depth) 209 x 570 x 570 mm
Parts color All parts colored

Approval and Application

Ingress protection code IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
Sustainability rating Lighting for circularity
Protection class IEC Safety class II

Initial Performance (IEC Compliant)

Luminous flux tolerance +/-7%
Initial chromaticity (0.38, 0.38) SDCM <5
Power consumption tolerance +/-10%
Init. Color Rendering Index Tolerance +/-2

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h 0.5 %
Control gear failure rate at a median useful 10 %
life 100000 h
Lumen maintenance at median useful life*
100000 h
93

Application Conditions

Performance ambient temperature Tq 25 °C
Maximum dim level 50%

Product Data

Order product name BDP100 LED50/740 II DW PCF SI LS-6 62P
Full product name BDP100 LED50/740 II DW PCF SI LS-6 62P
Full product code 871829191000800
Order code 910500991060
Material Nr. (12NC) 910500991060
Numerator – Quantity Per Pack 1
EAN/UPC – Product/Case 8718291910008
Numerator – Packs per outer box 1
EAN/UPC – Case 8718291910008
Dimensional drawing

2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.