tp-Link N300 GPON Access Point Installation Guide
- June 1, 2024
- tp-link
Table of Contents
tp-Link N300 GPON Access Point
Specifications
- Product Name: GPON Access Point
- Hardware Connection: Optical fiber, telephone, power
- Installation Options: Desktop Mounting, Wall Mounting, Junction Box Mounting
- Software Configuration: Standalone Configuration, Batch Configuration via Controller
Note: Images may differ from your actual product.
Network Topology
A typical network topology for the GPON AP is shown below.
Hardware Connection
Connect the hardware based on the provided accessories.
Note: Accessories and operations may vary by model. For details, refer to
the product manual.
- Remove the anti-dust plug, and connect your optical fiber to the AP’s GPON Port. Route excess fiber behind the device.
- Connect your telephone to the AP’s FXS port. If you don’t need telephone service, skip this step.
- Connect the AP to power.
- If the AP has a Power port, connect the AP to your power socket with the power adapter.
- If the AP has an AC Power Input port, connect the AP to your AC power cable with cord end terminals. Warning: The product can only be installed by skilled person!
Hardware Installation
Install the AP based on the provided accessories. If your AP supports multiple
installation options, you can choose one according to your needs.
Note: Accessories and operations may vary by model. For details, refer to
the product manual.
Option 1: Desktop Mounting
- Attach the multi-functional base to the AP.
- Place the AP vertically on a horizontal surface (such as a desktop or shelf) that is out of children’s reach.
Option 2: Wall Mounting
- Secure the multi-functional base to the wall in the correct direction with screws.
- Attach the AP to the base.
Option 3: Junction Box Mounting
-
1. Secure the mounting bracket to a junction box in the correct direction with screws. - Attach the AP to the bracket. Some models may have a screw hole to further secure the product via a screw.
Software Configuration
Option 1: Standalone Configuration
- Connect your device to an AP by using its default SSIDs.
- Launch a web browser and visit http://tplinkeap.net. Use admin for both Username and Password to log in. 3. Follow web instructions to configure the AP. You need to register the GPON AP and configure basic settings.
Option 2: Batch Configuration via Controller
- Get a Controller from https://www.tp-link.com or contact the sales staff.
- Launch the Controller and follow the configuration wizard to create a primary wireless network.
- Adopt APs in the Controller management interface. You need to register the GPON APs and configure basic settings.
For technical support, the user guide, and other information, please visit
https://www.tp-link.com/support/?type=smb, or simply scan the QR code.
© 2024 TP-Link 7106511033 REV1.0.0
FAQ
- Q: Where can I find technical support and user guides?
- A: For technical support, user guides, and other information, please visit https://www.tp-link.com/support/?type=smb, or scan the provided QR code.
References
- Anatel — Agência Nacional de Telecomunicações
- WiFi Networking Equipment for Home & Business | TP-Link
- TP-Link Product Support - Wireless Networking Equipment Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>