SUNCO LIGHTING LF-2FT-25W-L-H 2ft LED Linear Pendant Up and Down Light Instruction Manual
- June 1, 2024
- Sunco Lighting
Table of Contents
SUNCO LIGHTING LF-2FT-25W-L-H 2ft LED Linear Pendant Up and Down Light
Product Information
Specifications
- Size: 2FT
- Model: LF-2FT-25W-L-H
- Power (Tunable): 15/20/25W
- Working Current: 0.25A
- Input Voltage: AC100-277V
- CCT (Tunable): 3500K, 4000K, 5000K, 6500K
- Viewing Angle: Not specified
- Dimmable: Yes
- Warranty: 5 Years
Product Usage Instructions
Installation
WARNING: Installation must be carried out by a qualified electrician.
Pendant Mounting, Drywall Ceiling (Offgrid)
- Preparation: Take out the fixture and accessories from the package.
- Fix Cable to Canopies: Release locknut, pass the cable through canopy A and tighten the nut. Repeat the process for canopy B.
- Install Canopy B and Hang the Fixture Right End: Position mounting holes with positioning plate, hang the right end of the fixture with cable, adjust to desired height.
- Hang the Fixture Left End: Ensure the fixture is securely hung.
- Install Canopy A: Pass power cord through canopy A, connect it to main power wires, mount the crossbar onto J-box, fix canopy A to cover the J-box.
FAQ
-
Q: Is this product suitable for outdoor use?
A: No, this product is designed for indoor use only. -
Q: Can I adjust the color temperature of the light?
A: Yes, this product offers tunable CCT options of 3500K, 4000K, 5000K, and 6500K. -
Q: What should I do if the fixture is not dimming properly?
A: Check the connections and ensure that the dimming wires (PURPLE and PINK) are connected correctly according to the instructions.
Read this instruction carefully before installation. Keep it for further reference. Make electrical and grounded connections in accordance with the national electrical code and any applicable code. Always turn off the power supply before installation This product must be installed in accordance with the applicable installation code by a qualified electrician who is familiar with the construction and operation of the product and the hazards involved.
SPECIFICATION
Size| Model| Power (Tunable)| Working Current|
Input Voltage| CCT (Tunable)| Viewing Angle|
Ra| PF| Dimm able| Warranty
---|---|---|---|---|---|---|---|---|---|---
2FT| LF-2FT-25W-L-H| 15/20/25W| 0.25A| AC100-277V| 3500K
4000K
5000K
6500K
| 120°| >80| >0.9| 0-10V| 5 Years
WARNING:
- Risk of electric shock. Fixture installation requires knowledge of luminaires electrical systems. If not qualified, DO NOT attempt installation. Contact a qualified electrician.
- Risk of fire or electric shock. Suitable for wet locations. Always turn off the power supply before installation. Risk of fire or electric shock. Suitable for non-insulated surface and frame. DO NOT cover fixture with insulation liner or similar material.
- DO NOT install fixture on unstable,loose or easily breakable surface. DO NOT exert force on the surface of the fixture.
INSTALLATION
Pendant Mounting, Drywall Ceiling (Offgrid)
-
Preparation
Take out the fixture and accessories package from the box.
-
Fix cable to canopies
Release locknut, pass the cable through the canopy A and tighten the nut to fix the cable. Repeat to fix cable to canopy B.
-
Install canopy B and hang the fixture right end
Install the canopy B after positioning the mounting holes with positioning plate. Hang the right end of fixture with cable and adjust to desired height. Make sure that the fixture is securely hung.
-
Install canopy A
Pass power cord through the canopy A and connect it to main power wires. Mount the cross-bar onto J-box and fix canopy A to the cross bar to cover the J-box .
-
Hang the fixture left end
Make sure that the fixture is securely hung. The installation is completed .
The Installation must be carried out by a qualified electrician.