GoSmart H4054 Outdoor Swivel Camera Instruction Manual

GoSmart H4054 Outdoor Swivel Camera

Product Information

Technical Specifications

• Model: H4054 | H4055 H4064 | H4065
• Product: GoSmart Outdoor Swivel Camera IP-300 / IP-310 TORCH
• Features: Wi-Fi connectivity, Light, Motion Sensor, Microphone, SD card slot (Max. 128 GB)
• Wi-Fi Support: 2.4GHz (not compatible with 5GHz)

Product Usage Instructions

Safety Instructions and Warnings
Follow all safety instructions provided in the user manual to ensure safe usage of the product.

Package Contents

• Camera unit
• Installation material
• User manual

Installation and Assembly
Installing the Camera on the Wall:

1. Loosen the clamp screws on the installation bracket and position the power cables.
2. Tighten the screws and place the installation bracket at the desired location.
3. Install the camera unit on the bracket using the provided screws.

Pairing with an App

1. Download the EMOS GoSmart app from the Google Play Store or App Store.
2. Open the app, register, and select the Camera IP-300 / 310 TORCH.
3. Turn on the camera, connect to Wi-Fi, and pair with the app by following on-screen instructions.

Controls and Functions
Learn about the icons and controls in the application for managing the camera settings efficiently.

Recording to SD Card

1. Insert an SD card (max 128 GB, FAT32 format) into the camera for recording.
2. Format the SD card through the camera app for optimal performance.
3. View recordings in the app’s recording section.

FAQ – Troubleshooting

Issue : They can hear me outside, but I can’t hear the sound outside / I can hear the sound outside, but they can’t hear me.
This issue could be related to microphone or speaker settings. Ensure proper configuration of audio settings in the app and check for any obstructions that may affect sound transmission.

GoSmart Outdoor Swivel Camera IP-300 / IP-310 TORCH with Wi-Fi and Light

Package contents

Camera unit Installation material User manual

Technical Specifications

• Power supply: AC 100~240 V Dimensions: 74 × 131 × 260 mm Net weight: 800 g Resolution:
  [H4054+H4055] 1 920 × 1 080 /
  [H4064+H4065] 2304 × 1296

• Sensor:
  [H4054+H4055] 1/2.9” 2 Megapixel CMOS / [H4064+H4065] 1/2.8” 3 Megapixel CMOS

• IR distance: night vision up to 10 m PIR detection range: 10 m

• PIR angle: 120°

• Storage: SD card (max. 128 GB), Cloud storage, NVR

• Lamp: 12 W

• Luminous flux: Max. 200-1 200 lm (adjustable) Chromaticity temperature: 3 200 K

• Degree of protection: IP65

• APP: EMOS GoSmart for Android and iOS Connectivity: 2.4 GHz Wi-Fi (IEEE802.11b/g/n)

Notice

The camera only supports 2.4GHz Wi-Fi (does not support 5GHz).

Description of the device

1. – Light
2. – Microphone
3. – Camera
4. – Motion sensor
5. – Status LED:
6. The LED is red: the network is not working.
7. The LED flashes red: the device is waiting to connect to the Wi-Fi network.
8. The LED is blue: the camera is working properly.
9. – Terminal block for power supply in plug-in cover
10. – RESET button
11. – SD card slot (Max. 128 GB)

Installation and assembly

Installing the camera on the wall

• Loosen the clamp screws on the installation bracket and position the power cables.
• Make sure the wires are threaded through the hole in the installation bracket to prevent water ingress. Tighten the screws.
• Place the installation bracket on the installation site and screw it in place using the supplied screws.
• Install the camera unit on the bracket (installation bracket). Screw the camera unit with the screws.

Pairing with an app

Installing the EMOS GoSmart app

The app is available for Android and iOS via Google play and the App Store. To download the app, please scan the relevant QR code.

Steps in the EMOS GoSmart mobile app

• Open the EMOS GoSmart app and confirm the privacy policy and click I agree. Select the registration option.
• Enter the name of a valid email address and choose a password. Confirm your consent to the privacy policy. Select register.

Select Add device.
Select the GoSmart product category and select the Camera IP-300 / 310 TORCH.

• Turn on the device by plugging in the power and make sure the status LED is flashing red. If the LED does not flash, reset the device using the RESET button.
• Enter the name and password of your Wi-Fi network. This information remains encrypted and is used to allow the camera to communicate with your mobile device remotely.
• A QR code will appear on the display of your mobile device. Place the QR code in front of the camera lens.
• Confirm that you have heard the beep for a successful pairing. The device will be automatically found.

Controls and functions

Icons and indicator lights
Description of icons and controls in the application

Description of extension settings

• Device information – Basic information about the device and its owner

• Tap-to-Run and Automation – View scenes and automations assigned to the device. Creation of scenes is possible directly in the main menu of the application in the section
  “Scenes”. For TORCH, this could be, for example, an automation that triggers a siren if the camera detects movement at a certain time.

• Basic Function Settings – Enable/disable basic control functions such as automatic screen rotation or watermarking with time and date display. Another important setting is the ability to select one-way or two-way communication.

• IR Night Vision – Setting the IR illumination of the device. The same function manages the night mode settings in the device’s main panel.

• Detection Alarm Settings – Settings for motion detection, tracking, and chat plan.

• PIR set – Setting the PIR sensor (motion light switch).

• Siren Adjustment – Siren setting (volume and length).

• Onvif – Enable/Disable Onvif function (Continuous capture to NVR system).

• Cloud Storage – Cloud storage settings. The cloud is not included in the box, but can be purchased additionally through the app.

• Offline Notification – To avoid constant reminders, a notification will be sent if the device remains offline for more than 30 minutes.

• FAQ & Feedback – View the most common questions along with their solutions plus the ability to send a question/suggestion/feedback directly to us

• Share Device – Share device management to another user

• Add to Home Screen – Add an icon to your phone’s home screen. With this step, you don’t have to open your device through the app every time, but just click directly on this added icon and it will take you straight to the camera view

• Device update – Device update. Option to enable automatic updates

• Remove Device – Remove and evaporate the device. An important step if you wish to change the owner of the device. After adding the device to the app, the device is paired and cannot be added under another account.
  After inserting the SD card into the camera, two more options appear in this setting
  “Storage settings” and “Recording Settings”.

• Storage settings – Option to format the SD-Card and display the total, used and remaining capacity of the card.

• Recording settings – Enable recording to SD card, select recording mode (continuous / if sound or motion is recorded), set recording schedule.

Recording to SD card

• One of the basic functions of the home security system is the SD card recording function.
• The camera supports SD cards with a maximum size of 128 GB in FAT32 format. When the SD card is full, the recordings are automatically overwritten.
• To enable the recording function, insert the SD card into the corresponding slot on the bottom of the camera. We always recommend formatting the SD card directly in the advanced settings of the camera app.
• Recordings can also be viewed in the app in the “recordings” section

Troubleshooting FAQ

I can’t get the devices to pair. What can I do?

• Make sure you are using a 2.4GHz Wi-Fi network and have a strong enough signal
• Allow the app all permissions in the settings
• Make sure you are using the latest version of the mobile operating system and the latest version of the app
• They can hear me outside, but I can’t hear the sound outside / I can hear the sound outside, but they can’t hear me.
• Make sure you have granted all permissions to the app, especially for the microphone.
• One-way communication can also be a problem. If you see this icon at the bottom: , it means that the device is set to one-way communication.
• To fix this, go to the “Basic Function Settings” menu and set “Talk mode” to “Two- -way talk”. This menu can be found in the extension settings (see Chapter “Description of extension settings”).
• The correct icon for two-way communication looks like this:

I’m not getting notifications, why?

• Allow the app all permissions in the settings
• Turn on notifications in the app settings (Settings -> App notifications)

What SD-Card can I use?

• SD card with a maximum storage capacity of 128 GB and a minimum speed class of CLASS 10 in FAT32 format.
• When the SD card memory is full, are the oldest records automatically overwritten or does the user have to manually delete them?
• Yes, the records are overwritten automatically.

Who can use the equipment?

• Facilities must always have an admin (owner)
• Admin can share the device with the remaining household members and assign them rights

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>