GoSmart H4031 Wireless Home Video Doorbell IP-09C User Guide
- June 13, 2024
- GoSmart
Table of Contents
H4031
IP Door Camera Unit
www.emos.eu
H4031 Wireless Home Video Doorbell IP-09C
Package contents:
Wi-Fi doorbell
Cover (rain hood)
Wireless chime
Power supply
Connecting cable
Mounting material – screws
Manual
Technical specifications
Wi-Fi doorbell
Power supply: 12 V DC
Resolution: 1 920 × 1 080
Lens: 2.69 mm JX-F37
Lens angle: 110°
PIR range: up to 4 m
Storage: SD card (max. 64 Gb), Cloud storage
Enclosure rating: IP44
Maximum number of users: 10
APP: EMOS GoSmart for Android and iOS
Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
Wireless chime
Power supply: 3× AA (LR6) 4.5 V DC
Frequency: 433.92 MHz ±250 kHz
Range: ca. 80 m (open space)
Description of the device fig. 1a
A – Microphone
B – PIR sensor
C – Photoresistor
D – Lens
E – Status LED
- LED flashing red and green: Battery charging.
- LED flashing red: Waiting for network configuration.
- LED flashing green: Configuring network.
- LED glowing green: Working correctly.
- LED glowing yellow: Powered from an external source, charging complete, no batteries detected (note: If no batteries are inserted, the indicator only glows yellow).
- LED not glowing red and green: Weak power supply in standby mode.
F – Ring button
Description of the device: fig. 1b
A – RESET button
B – SD card slot
C – USB port
D – Power supply
E – Input – door lock control
F – Alarm sensor
G – Battery slot
Description of the device: fig. 1c
A – Status LED
- LED flashing red: Working correctly.
- LED glowing red: Voltage dropped below 3.3 V.
B – Speaker
C – Operating mode
D – Ringtone selection
E – Ringtone volume
- Low
- Medium
- High
Installation
fig. 2
- Mount the cover (rain hood) of the doorbell onto a wall using the enclosed screws.
- The mounting height of the doorbell from the ground should be 1 400–1 600 mm.
- Make sure the PIR sensor is protected from direct sunlight.
- Connect the power supply to the input of the doorbell according to the diagram.
- Mount the doorbell using the screw on the underside according to the diagram.
Pairing the wireless chime with the Wi-Fi doorbell: fig. 3
- Press and hold the button for 3 seconds until you hear a „ding-dong“ sound.
- Then, press the ring button on the Wi-Fi doorbell.
The unit will make a sound and glow blue, indicating successful pairing.
Unpairing the wireless chime from the Wi-Fi doorbell:
- Press and hold the button for 5 seconds until you hear a double „ding-dong“ sound.
- The devices are now unpaired.
Connecting the system: fig. 4
The device only provides a volt-free contact for controlling the electric door
lock. Therefore, the device requires an external power source to function
properly.
Installing the EMOS GoSmart app: fig. 5
The app is available for Android and iOS on Google play and App Store.
Download the application by scanning the corresponding QR code.
Router setting: fig. 6
The camera only supports 2.4 GHz Wifi (not 5 GHz).
EMOS Go Smart mobile app:
Fig. 7a
Open EMOS Go Smart and confirm the privacy policy by tapping agree.
Fig. 7b
Choose sign up.
Fig. 7c
Enter a valid e-mail address and choose a password.
Confirm the privacy policy by tapping agree.
Choose log in.
Fig. 8a
Choose add device.
Fig. 8b
Choose the corresponding product category.
Fig. 8c
Choose the correct type of product.
Fig. 8d
Connect the device to power.
Fig. 8e
Make sure the LED on the device is flashing.
Confirm by tapping next.
Fig. 8f
Enter the name of the Wifi network and password.
Confirm by tapping next.
Fig. 8g
A QR code will appear on the screen of your device.
Place the QR code in front of the lens of the camera unit.
Confirm that you have heard an audio signal for successful pairing.
Fig. 8h
The device will be detected automatically.
Fig. 8i
The device has been found. Confirm by tapping done.
Connectivity: Wi-Fi 2.4 GHz IEEE 802.11b/g/n
Frequency band: 2,400–2,4835 GHz
**** Do not dispose with domestic waste. Use special collection points for
sorted waste. Contact local authorities for information about collection
points.
If the electronic devices would be disposed on landfill, dangerous substances
may reach groundwater and subsequently food chain, where it could affect human
health.
Hereby, EMOS spol. s r.o. declares that the radio equipment type H4031 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.emos.eu/download.
Servis: EMOS SI, d.o.o., Rimska cesta 92, 3311 Šempeter v Savinjski dolini,
Slovenija
tel: +386 8 205 17 21
e-mail: reklamacije@emos-si.si
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>