NNS NS-2071BT Rechargeable Retro Home Mini Wooden Radio User Manual
- June 12, 2024
- NNS
Table of Contents
NNS NS-2071BT Rechargeable Retro Home Mini Wooden Radio
Product Information
- Model: Unknown
- Power Supply: AC 220V/50Hz 12W
- Output Power: 15W
- Frequency Range: 8.0-16.0 MHz
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC Compliant for Uncontrolled Environment
Product Usage Instructions
- Plug the device into an AC power supply with a voltage of 220V and frequency of 50Hz.
- Press the power button to turn on the device.
- The device operates in the frequency range of 8.0-16.0 MHz.
- The output power of the device is 15W.
- For compliance with FCC Part 15, this device must not cause harmful interference and must accept any interference received.
- To comply with FCC radiation exposure limits, the device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
- Do not modify or change the device as this could void the user’s authority to operate the equipment.
OPERATIONS
RADIO OPERATION
Turn on the VOLUME switch,is bt mode,
- Press the AM/FM/SW button , can choose AM, FM, SW
- Turn the “TUNING” button to choose the required station
- Adjust antenna position to get the best receiving effect.
USB/TF OPERATION
- During radio program playing, insert USB/TF card, it will automatically switch to play from USB/TF card. You can press or buttons on radio to select the music you need.
FUNCTIONS
INTERNAL BT FUNCTION OPERATION
Turn on the VOLUME switch, the unit will speak”BT MODE” then turn on the bt of cellphone or other mobile device with bt function, start to search a bt named “CW6685″and pair with it, after successful pairing, it will beep. Now cellphone or another mobile device can play the music through bt on radio. You can select. play and pause the music by pressing or a buttons on radio or cellphone or other mobile devices.If you want to stop using bt function just need to turn off the bt cellphone or other mobile devices.
TWS FUNCTION
After phone and host1 connected successfully, open host2 (same model) and enter bluetooth mode to play the music. Please press button both (host 1 and host 2) for 2 seconds at the same time. After successfully paired (prompt tone will rise on speaker), it will begin stereo broadcasting.
SPECIFICATION
- AC: 220V/50Hz
- Output power: 12W
- Speaker: INCH 20 15W
- Noise rate: ≥45DB
- Receiving performance index:
- FM: 87-108 MHz
- AM: 530-1600KHz
- SW: 8.0-16.0 MHz
- Sensitivity index: FM: 15db ‡5db
- AM: 85db +5db
- SW: 15db ‡5db
- Noise rate: FM: ≥45db
- AM: ≥35db
- SW: ≥35db
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.