Shenzhen Xingren Eucalyptus Networkco AS18 X2 Openear Waterproof Bone Conduction Headphones User Manual
- June 4, 2024
- Shenzhen Xingren Eucalyptus Networkco
Table of Contents
Waterproof Bone Conduction Headphones
OPENEAR AS18 X2
User Manual
How to Wear
What’s In the Box
OPENEAR AS18 X2
Pouch X1 Ear-plugs X1
Manual X1 Charging Cable x1
Specifications
Model: OPENEAR AS18 X2
Type: Bone Conduction Headphones
BT Version: 5.2
Connection: ≥10m/33feet
Battery: 180mAh
Play Time: ≥8h
Charging Time: ≈1.5h
Charging Voltage: DC 5V
Button Control
- charging port
- MFB
- Button +
- Button –
Power On/Off
Power On: press & hold the MFB for 3 sec, prompt: power on;
Power Off: press & hold the MFB for 3 sec, prompt: power off;
BT Connection
The headset enters BT mode automatically when power-on . Select “AS18 X2” in BT menu to connect, prompt: connected.
Switch BT/MP3 mode
Under power-on state, double click the MFB to switch BT/MP3 mode.
Data Transfer
- Download the audio files (mp3,wav formats only) into your computer.
- Attach the headset to the USB charging cable.
- Connect the USB cable to a computer USB port.
- You could see a hard drive on your computer and open it.
- Drag-and-drop the files into the hard drive folder.
- Eject the hard drive after files transfer is complete.
Play/Pause Music
Click once the MFB.
Previous/Next Track
Previous Track: press and hold the button – for 3 sec.
Next Track: press and hold the button + for 3 sec.
Volume Up/Down
Volume Up: click once the button +.
Volume Down: click once the button -.
Answer/End/Reject A Call
Answer/End A Call: click once the MFB.
Reject A Call: double click the MFB.
Activate Voice Command
Quickly triple click the MFB.
Charge
Please use DC 5V adapter for charging. The green LED is on during charging. The white LED is on after fully charged.
Low Battery
Battery is lower than 5%, prompt: battery low.
Restore Factory Settings
Under power-off state, hold & press the MFB for 10 sec until the second time white and green LEDs flash.
Attentions
- Listening to loud music for a long time may cause discomfort, please use medium volume if possible. Do not use high volume for long periods of time.
- Using headphones will affect your perception of the surrounding environment. Pay more attention when using headphones.
- Do not remove or modify the headphone, as this may cause damage or burn out.
- Do not throw, twist on headphones or put them into a fire.
- Keep it away from fire, hydration and high pressure equipment.
- Not suitable for children under 10-year-old containing small parts.
- Do not classify it as household waste. Please send it to the local electrical equipment recycling station.
- When using the headset, do not exceed the depth of 2 meters underwater. It can be used in fresh water, tap water, swimming pool water, sea water, etc. It cannot be used in soapy water, body wash, shampoo or high temperature and high humidity environment.
- The charging pole piece has been treated for anti-corrosion, but the seawater is highly corrosive. It is recommended to clean it in time after soaking in seawater.
Note: The company does not assume any responsibility for the loss of personal property caused by the violation of the above warnings.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>