weelko W003W 3 Tanks Wax Warmer User Manual
- June 9, 2024
- weelko
Table of Contents
weelko W003W 3 Tanks Wax Warmer
WELCOME! Thank you very much for purchase. Please read the instructions carefully before operating the instrument. You can also ask a professional for guidance to make sure you are using the instrument correctly. We will accept no responsibility for any accidents that occur due to incorrect operation. The company reserves the right to amend the details of the instruments with no prior notice. If any mistakes are found in these instructions, please feel free to send us an e-mail informing us so that we can correct them.
PACKAGE CONTENTS
- These components are subject to change without prior notice.
- Appearance of product may differ from the image.
| No. | PRODUCT | REF. | QTY. |
|---|---|---|---|
| 1 | APPLICATOR | – | 3 |
| 2 | BASE | – | 1 |
INSTRUCTIONS OF USE
- Place the depilation wax in the machine.
- Switch on the unit. After 20 minutes, the wax can be taken out and rolled onto the depilation paper for use.
CAUTIONS
- Do not use depilation wax on tumors, spots, wounds, rashes or inflammation. Do not use depilation wax on sensitive skin.
- Before performing wax depilation, please test the temperature of the wax first.
- It is dangerous to move the machine when switched on.
MAINTENANCE
Turn off the power when the machine is not being used.
TECHNICAL SHEET
WARNING
- Never under any circumstances attempt to open or inspect the internal components or accessories of the machine. If an inspection becomes necessary, please contact your supplier or a suitably competent technician.
- Never use the unit in humid or poorly ventilated environments, such as wet rooms, bathrooms etc. to prevent damage to the electrical components of your unit.
- Never use the unit outdoors; exposure to the elements can cause damage.
- Don’t connect the power when there is no wax in the wax machine.
- If the power cord was destroyed, please ask a professional to service and replace it to avoid hazards, or contact the dealer for service.
EC-DECLARATION OF COMPLIANCE
This product meets the following requirements:
- Conditions set out in the Low Voltage Directive: 2014/35/EU.
- Conditions set out in the Electromagnetic Compatibility Directive: 2014/30/EU.
RECYCLING
Whenever any of our electrical products or their presentation packaging bear
this symbol, it means that these products should not be treated as
conventional household waste in Europe. To ensure proper treatment of this
waste, dispose of it in accordance with local laws or as required for the
disposal of electrical equipment. This initiative will help preserve save
natural resources and improve standards of environmental protection in regard
to the treatment of electrical waste
© 2018 Weelko
Visit our website at www.weelko.com for more
information
Importer : Weelko Barcelona, S.L. ESB65397556
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>