baby einstein 6787-MEES Musical Infant to Toddler Rocker User Manual

baby einstein 6787-MEES Musical Infant to Toddler Rocker

Product Information

Specifications

• Brand: Kick to It OpusTM
• Product Name: Musical Infant to Toddler Rocker
• Model Number: 16787-MEES

Description

The Kick to It OpusTM Musical Infant to Toddler Rocker is a versatile baby product that can be used from infancy to toddlerhood. It features a seat frame, backrest tube, footrest unit with vibration, seat pad, and a toy bar with toys for entertainment.

Power Switch

The rocker comes with a 3-position slide switch that powers the electronics ON and OFF. The switch has two settings: Parent Activated and Baby Activated. When set to Parent Activated, music and lights play continuously for 20 minutes. When set to Baby Activated, sounds and lights activate when baby motion is detected.
To turn the device OFF, slide the switch to the far-left position.

Care and Cleaning

Refer to the user manual for detailed instructions on how to clean and maintain the rocker. Use a damp cloth with mild soap to clean the surfaces regularly and ensure proper hygiene for your child.

Product Usage Instructions

1. Assembly: Follow the provided instructions to assemble the rocker components using the included screws.
2. Power Switch: Set the power switch to either Parent Activated or Baby Activated mode based on your preference.
3. Usage: Place your infant or toddler in the rocker ensuring proper support and comfort. Activate the music and lights as desired.
4. Cleaning: Regularly clean the rocker using a damp cloth with mild soap to maintain cleanliness.
5. Storage: When not in use, store the rocker in a safe and dry place away from direct sunlight or moisture.

FAQ

Q: How do I change the batteries in the rocker?

A: The vibration unit requires one C/LR14 alkaline battery, and the toy bar requires two AAA/LR03 batteries. Refer to the user manual for detailed instructions on battery replacement.

Q: Can the rocker be used without batteries?

A: The rocker can still be used for its basic rocking function without batteries, but features like music, lights, and vibration will not work without the required batteries.

16787-MEES

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

• FALL HAZARD: Children have suffered head injuries falling from rockers.
• NEVER leave the child unattended.
• ALWAYS use the restraint system. Adjust to fit snugly.
• Stop using restraint system once the child tries to stand up and is able to climb in and out of the rocker.
• DO NOT move or lift this product with the baby inside it. Never lift product using a toy bar as a handle.
• NEVER place a child over 40 lb (18 kg) in the product.
• The reclined position is only for children who cannot sit upright unassisted (until 20 lb or 9 kg).
• Stop using reclined position when baby starts trying to sit up.
• The upright position is only for children who have developed enough upper body control to sit up without tipping forward.
• NEVER use this product on an elevated surface (e.g. a table). ALWAYS use on the floor.
• DO NOT place this product near a window as it can be used as step by the child and cause the child to fall out of the window.
• Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
• DO NOT place this product near a window where cords from blinds or curtains could strangle a child.
• SUFFOCATION HAZARD: Babies have suffocated when seats tipped over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
• Never let the child sleep in this product.
• NEVER attach any additional strings or straps to product or toy bar.
• NEVER use as an infant carrier or for automobile or airline travel.

CAUTION

This product contains small parts. Adult assembly required.

IMPORTANT

• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Care and Cleaning

Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
Frame – Wipe the metal frame with soft, clean cloth and mild soap.

Battery Information

The vibration Unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included). The toy bar requires (2) size AAA/LR03 batteries (not included).

CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries, or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of product or batteries in fire, batteries may explode or leak.
• This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Parts List and Drawing

INSTALLATION

Using the Seat Restraint

Using the Recline Function

Disassemble the toybar

Using the Power module

FCC Statement / CAN ICES-3 (B) / NMB-3(B)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

@babyeinstein

youtube.com/babyeinstein

MANUFACTURED FOR • FABRIQUÉ POUR ® ©2024 KIDS2, LLC. www.kids2.com/help KIDS2, LLC. ATLANTA, GA USA 30305 • 1-800-230-8190
IMPORTED BY • IMPORTÉ PAR
KIDS2 CANADA CO. PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081 KIDS2 UK LTD. GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK, BREAKSPEAR WAY, HEMEL HEMPSTEAD, HP2 4TZ
+44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934 KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA • HECHO EN CHINA • FABRIQUÉ EN CHINE • HERGESTELLT IN CHINA • WYPRODUKOWANO W CHINACH • PRODOTTO IN CINA

References

• Official Baby Einstein™ Videos, Music & Products Inspire Curiosity – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>