baby einstein 11710-MEWS Airplane Adventure 2 In 1 Activity Jumper Instruction Manual
- June 1, 2024
- baby einstein
Table of Contents
11710-ME W S
Airplane Adventure™ 2-in-1 Activity Jumper
Activity Jumper
IMPORTANT! KEEP FOR FUTURE REFERENCE.
TO PREVENT SERIOUS INJURY OR DEATH:
WARNING
-
Use the product ONLY if the child meets ALL of the following conditions:
…Is at least 6 months of age.
…Can sit up unassisted.
…Is less than 30” tall (76.2 cm).
…Weighs less than 25 lbs (11 kg). -
DO NOT use the product in dangerous conditions or situations:
-
DO NOT allow children who can stand or walk on their own to sit in the seat of the product.
-
ALWAYS keep child in view while the child is in the product. Never leave child unattended.
-
NEVER move the unit while the child is in the seat.
-
DO NOT add additional strings or straps to product.
-
DO NOT use any hardware or parts other than that supplied.
-
DO NOT use the product as a swing.
-
Ensure that the child is correctly and safely positioned in the product.
-
Allow child to use product only for short periods of time (20-minute intervals).
-
It can be dangerous to allow other children to play near the product.
-
Ensure height adjustments on legs are at the same level before placing child in product.
FALL HAZARD:
Babies can FALL from unit resulting in head injuries.
- NEVER leave child unattended. ALWAYS keep child in view while the child is in product.
- NEVER use near stairs.
- To avoid tip over, place the product on a flat, level surface.
- DO NOT place the product on an elevated surface.
- A child’s movement can slide the product.
STRANGULATION HAZARD:
Strings can cause STRANGULATION.
- DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords.
- DO NOT suspend strings over product or attach strings to toys.
- For indoor use only.
- Do not swing or spin child in product.
IMPORTANT
- Adult assembly required.
- Please read all instructions before assembly and use.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use product if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
Battery Information
This product requires (3) size AA (1.5V) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise,
battery life may be shortened, or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failing light, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste, as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling and collection information.
Care and Cleaning
Seat pad – Machine wash the fabric seat in cold water.
Use a gentle wash cycle with no bleach. Tumble dry, using low heat.
Plastic Parts – Wipe clean with damp cloth and mild soap. Air dry.
Do not immerse in water.
Frame – Wipe the metal frame with soft, clean cloth and mild soap.
Parts List and Drawing
| No. | Qty. | Description |
|---|---|---|
| 1 | -1 | Propeller |
| 2 | -1 | Toy Station |
| 3 | -1 | Seat Ring |
| 4 | -1 | Seat Pad |
| 5 | -1 | Play Surface |
| 6 | -3 | Base tube |
| 7 | -3 | Metal Arm with Spring |
| 8 | -1 | Hang ing Sun Toy |
| 9 | -1 | Crinkle Disk |
| 10 | -2 | Cloud Topper |
| 11 | -1 | Roller Ball Toy |
| 12 | -1 | Bead Chaser Stalk Toy |
| 13 | -1 | Flash card |
Operating Instructions
Mode Control
Care and Cleaning
Storage
FCC Statement / CAN ICES-3 (B) / NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
1 this device may not cause harmful interference, and 2 this device must
accept any interference received, including interference that may cause
undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
@babyeinstein
youtube.com/babyeinstein
stay Curious ™
MANUFACTURED FOR ©2023 KIDS2, INC.
www.kids2.com/help
KIDS2, INC. ATLANTA, GA USA 30305
1-800-230-8190
IMPORTED BY
SUMMER INFANT (USA) INC. 1275 PARK EAST DRIVE, WOONSOCKET, RI 02895 USA •
1-401-671-6551
KIDS2 CANADA CO. PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo,
Japan 150-0013 • (03) 5322-6081
KIDS2 UK LTD. GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK, BREAKSPEAR WAY, HEMEL
HEMPSTEAD, HP2 4TZ +44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS
+31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V. (55) 5292-8488 MADE IN CHINA
11710_6MEWS_IS120523
babyeinstein.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>