Light Wonder – Betson Southeast 321E Kascada Dual Screen Installation Guide

Light Wonder – Betson Southea

Product Information

Specifications

• Product Name: Georgia COAM ArgOS Software
• Model: 321E
• Compatibility: Coin Operated Amusement Machines (COAM) with SAS Secondary Channel

Product Usage Instructions

Software Installation

1. Ensure the machine is powered off.
2. Insert the BIOS dongle into the BIOS port.
3. Insert the Installer USB media into the designated port.
4. Power on the machine and select Factory Reset in the ArgOS Installation Software window.
5. Follow the on-screen instructions to complete the factory reset process.
6. Insert the game software USB drive into the appropriate port.
7. Select all required software items for installation and proceed with the installation process.
8. Power off the machine after installation completion.
9. Insert the DRM license dongle into the specified USB port.
10. Close the logic door and power on the machine.

COAM Software Configuration

1. To configure EGM manually, select Skip in the EZConfig screen.
2. Access the setup menu by pressing the diagnostic switch button or turning the attendant key.
3. Adjust locale settings if necessary in the Locale Setup screen and select Save & Continue.
4. Adjust date, time, and time zone in the Clock Setup screen if needed and select Save. Use Modify button for adjustments.
5. In the Machine Setup screen, set Serial ID, Asset ID, Accounting Denom, Cashout Amount Rounding, and other options as required using the provided input methods. Select Save & Continue.

Frequently Asked Questions (FAQ)

• Q: What should I do if I encounter issues during software installation?
  A: If you face any problems during software installation, ensure all hardware components are properly connected and try restarting the installation process following the provided steps carefully.

• Q: Can I skip any of the software configuration steps?
  A: While it is recommended to complete all software configuration steps for optimal performance, you can skip certain steps if they are not relevant to your setup. However, ensure essential configurations are correctly set up to avoid operational issues.

Georgia COAM (Coin Operated Amusement Machine) ArgOS Software Setup Guide for 321E
Internal Draft only

The look and feel of the games described and displayed herein and the individual components and displays of such games are trade dress of Light & Wonder, Inc. and its Subsidiaries. ©2023 Light & Wonder, Inc. and its Subsidiaries. All rights reserved. Unauthorized Distribution Prohibited. Confidential. This document (“Document”) has been provided to you by Light & Wonder, Inc. or one or more of its directly or indirectly wholly owned companies (collectively, “Light & Wonders”). This Document contains a variety of: (a) materials and other items relating to products or services of Light & Wonder or its licensors or other third parties, including layout, information, text and scripts, data, files, images, photographs, pictures, artwork, designs, graphics, logos, drawings, charts, button icons, instructions, illustrations, advertising copy, technology, interactive features, “look and feel,” and the compilation, assembly and arrangement of the materials of the Document, and copyrightable material; (b) service marks, trademarks, logos, trade names and trade identities of Light & Wonder or its licensors or third parties, when applicable; and (c) other forms of intellectual property (all of the foregoing in (a), (b) and (c), collectively, “Content”). This Document and the Content are owned or controlled by Light & Wonder or its licensors or third parties, when applicable. All right, title, and interest in and to the Content is the property of Light & Wonder or its licensors, when applicable, and is protected by the intellectual property laws of the United States and elsewhere to the fullest extent possible. All ® notices signify marks registered in the United States by Light & Wonder or its licensors, when applicable. Light & Wonder grants the intended recipient a limited, non- exclusive, revocable, non-assignable, personal, and non-transferable license to view and/or print one copy of the Content, to be used only for its original intended purpose and otherwise to be kept confidential, but Light & Wonder or its licensors, as the case may be, retain ownership of such Content. The foregoing limited license does not provide the intended recipient with any ownership of, or any other intellectual property interest in, any Content and this license may be immediately suspended or terminated for any reason, by Light & Wonder in its sole discretion, and without advance notice or liability. This Document and Content have been provided to you solely for use in operating the product(s) described herein. Except as otherwise provided hereunder, duplication of Light & Wonder products and programs in whole or in part without written authorization from Light & Wonder is expressly prohibited. The specifications and information contained in this documentation are subject to change without notice. All statements, information, illustrations, specifications, and recommendations in this documentation are believed to be accurate, but are provided without warranty of any kind, express or implied. The product(s) referenced in this Document is/are being provided by Light & Wonder as-is. Light & Wonder, Inc. 6601 Bermuda Road, Las Vegas, Nevada 89119, USA Phone: 1 702-897-7150 Email: tm@lnw.com www.lnw.com

Background

This document provides specific Georgia COAM ArgOS software setup instructions to operate where a SAS Secondary Channel is required. It is presumed that the cabinet is fully assembled with production grade hardware components and equipped with the proper peripheral devices and firmware version. All required software components are available on the proper installation media.

Software Installation Media, BIOS, and DRM License Dongle

Make sure to have the different Software components on LNW USB Drives and Dongles as follows:

1. Install USB Drive: AIN0000000L.img
2. Game Data USB Drive (parts below may not be latest):
   • AOS0000321E.img (OS)
   • AWI05X0000I.img (Windows)
   • A8ED-000-1000.img (game bundle)
   • JRUSGALY0D.img (Jurisdiction)
3. BIOS Dongle: ABIP05X0000D
4. DRM License USB Dongle

Software Installation

1. Open the main door and make sure the power is off.

2. Open CPU logic door.

3. Insert BIOS dongle to BIOS port as shown in Figure 1.

4. Insert Installer USB media into INSTALL 1 port as shown in Figure 1.

5. Power on the machine.

6. In the ArgOS Installation Software window, select Factory Reset as shown in Figure 2

7. Select Yes to proceed and wait for the factory reset process to complete as shown in Figures 3 & 4.

8. Insert the game software USB drive in INSTALL 2 port as shown in Figure 1.

9. Under the Modules to Install section, select all the required software items (game bundle, OS, jurisdiction, windows), and then select Install. See Figure 5
   Note : the software versions shown are for demonstration. Figure 5: Modules to Install section

10. In the Install screen, select Install as shown in Figure 6

11. Wait for the installation of each required software item to complete. See Figure 7

12. Power off the EGM.

13. Remove the Installer USB drive and the Software USB drive.

14. Insert the DRM license dongle in either LICENSE 1 or LICENSE 2 USB port. See Figure 1

15. Close the logic door.

16. Power on the EGM.

COAM Software Configuration

1. EZConfig
   To configure EGM manually, select Skip.

2. Press the diagnostic switch button or turn the attendant key to access the setup menu

3. Setup Menu

Locale Setup
The default values based on jurisdiction are automatically populated and set. If necessary, adjust the configurable options.
Select Save & Continue

Clock Setup
If necessary, adjust the date, time and time zone using the Modify button. Use the reels and drop-down list to adjust the options. Once the options have been set, select Save. Otherwise, use the automatically detected information.
Select Continue

Machine Setup
Set the Serial ID, Asset ID, Accounting Denom, Cashout Amount Rounding and Hand Count Counter Reset Timer using the numeric keypad or drop-down list.
External Printer Connected should be left to OFF.
Select Save & Continue

Table 1: Hand Count Counter Reset Timer setÝngs

gaming action for 120 seconds and amount of money left on the EGM is less than Hand Count Reset Credit

Limit ( Figure 16 )

90 seconds| When selected, hand count shall reset if there is no gaming action for 90 seconds and amount of money left on the EGM is less than

Hand Count Reset Credit Limit ( Figure 16 )

60 seconds| When selected, hand count shall reset if there is no gaming action for 60 seconds and amount of money left on the EGM is less than

Hand Count Reset Credit Limit ( Figure 16 )

30 seconds| When selected, hand count shall reset if there is no gaming action for 30 seconds and amount of money left on the EGM is less than

Hand Count Reset Credit Limit ( Figure 16 )

0 seconds| When selected, hand count shall not reset if there is no gaming action and amount of money left on the EGM is less than Hand

Count Reset Credit Limit ( Figure 16 )

Table 2: Cashout Amount Rounding setÝngs

External Printer Connected = OFF, the amount to be cashed

out shall be the non-rounded amount.

Round down to $1| When selected, the amount to be cashed out shall be rounded down to a full multiple of $1.
Round down to $5| Default. When selected, the amount to be cashed out shall be rounded down to a full multiple of $5.

Table 3: External Printer Connected setÝngs

not used as cashout device

ON| When selected, external printer is used as cashout device

Device Setup
The default setÝngs are automatically populated and set. Printer and bill validator are detected when connected. Select Continue.

Limit Setup
The default limits are automatically populated and set. If necessary, update limit values using the numeric keypad.
Hand Count Reset Credit Limit should be set to the minimum value of wager available on the EGM (with game set A8ED-000-1000, the minimum bet is $0.40).
Select Save & Continue

Protocol Setup

Hosts

SAS Primary
The default values for the primary host are automatically populated and set. If necessary, adjust the configurable options.
Set the SAS Primary Address using the numeric keypad to match the address expected by the Intralot CMS host. See Appendix for Intralot CMS host connection
Validation Type option should be left to None.
Remote Handpay Reset, Jackpot Reset to Credit, Resend Handpay Pending, Disable on Comm Loss, and Send Reel Stops options should be left to OFF.
Select Save & Continue

SAS Secondary
The default values for the secondary host are automatically populated and set. If necessary, adjust the configurable options.
Set the SAS Secondary Address using the numeric keypad to match the address expected by the secondary host. See Appendix for SAS Secondary host connection.
Validation Type option should be set to either Standard, System or Enhanced depending on which validation type is used by the secondary host.
Set Resend Handpay Pending to ON if necessary.
Remote Handpay Reset, Jackpot Reset to Credit, Disable on Comm Loss, and Send Reel Stops options should be left to OFF.
Select Save & Continue

Device Ownership
The default setÝngs for SAS host/s are automatically populated and set. SAS Primary acts as the primary control host, whereas SAS Secondary acts as the validation host.
If Validation type = Standard, enable Voucher Out and Date Time for SAS Secondary.
If Validation type = System, enable Voucher In, Voucher Out and Date Time for SAS Secondary.

If Validation type = Enhanced, enable Voucher In, Voucher Out, Handpay and Date Time for SAS Secondary.
Select Save & Continue

Device SetÝngs
If necessary, select Voucher to configure the voucher setÝngs. In the voucher setÝngs, set the Location, Address 1, Address 2, and Expiration (in days).
If Validation type = Enhanced, select Handpay to configure the handpay setÝngs. In the handpay setÝngs, enable Handpay Validation and Handpay Receipt if necessary.
Select Save & Continue

Money Handling Setup
The default options for the credit setÝngs are automatically populated and set. If necessary, adjust the configurable options.
Select Save & Continue

ION Network Setup

Setup Complete
Select Yes to proceed with game setup.

Game Setup

Paytable Setup

• Select a theme to configure.
• In the Denomination screen, select the game pay table and then select Next
• In the Custom Options Setup, select Next
• Repeat the previous steps to all game themes
• Once all the game themes are set, select Save

Once the setup is complete, close the main door. EGM should be playable given that no hard tilt is available. See Figure 34

Appendix

Intralot CMS Host (SAS Primary) Connection

Connect the DB9 Female cable/adaptor (similar to Figure 35) to HOST INTERFACE 1 on the backplane board as shown in Figure 36.

Please consult with Intralot CMS support for site controller connection and COAM commissioning.

Secondary SAS Host Connection
Please consult with the secondary host vendor for the site for their interface/connection. Cable/adaptor may be similar to Figure 35 and should be connected to HOST INTERFACE 2 on the backplane (Figure 36).

©2024 Light & Wonder, Inc. All Rights Reserved. Unauthorized distribution prohibited. CONFIDENTIAL

References

• lnw.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>