hama 00222226 Flores Alarm Clock Instruction Manual

June 1, 2024
Hama

hama 00222226 Flores Alarm Clock

hama-00222226-Flores-Alarm-Clock-product

Product Information

Specifications

  • Brand: Flores
  • Model: Radio Alarm Clock Funkwecker
  • Power Supply: 1.5V, 1 x AA battery

FAQ

  • Q: How do I activate the alarm on the radio alarm clock?
    • A: To activate the alarm, press the appropriate button on the clock labeled for activating or deactivating the alarm.
  • Q: How do I change the time manually on the clock?
    • A: You can manually adjust the time by following the manual time setting instructions provided in the user manual.

Explanation of warning symbols and notes

Warning

  • This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

  • This symbol is used to indicate additional information or important notes.

Package Contents

  • “Flores” radio alarm clock
  • 1AA battery
  • These operating instructions

Safety Instructions

  • The product is intended for private, non-commercial use only.
  • Protect the product from dirt, moisture and overheating and use it in only in dry environments.
  • Do not use the product in areas in which electronic products are not permitted.
  • Do not place the product near interference fields, metal frames, computers, TVs, etc. Electronic devices and window frames can negatively affect the product’s functionality.
  • Do not drop the product and do not expose it to any major shocks.
  • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Keep the packaging material out of the reach of children due to the risk of suffocation.
  • Dispose of packaging material immediately in accordance with the locally applicable regulations.

Warning:  Batteries

  • When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
  • Only use batteries that match the specified type. Keep the instructions for the correct choice of batteries included with the operating instructions of devices safe for future reference.

Warning:  Batteries

  • Before you insert the batteries, clean the battery contacts and the polarity contacts.
  • Do not allow children to change batteries without supervision.
  • Replace all the batteries in a set at the same time.
  • Do not mix old and new batteries, or batteries of different types or from different manufacturers.
  • Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
  • Do not short-circuit batteries.
  • Do not charge batteries.
  • Do not burn batteries or heat them up.
  • Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
  • Remove spent batteries from the product and dispose of them without delay.

Setup

Inserting the battery

  • Open the battery compartment on the back of the alarm clock.
  • Insert an AA battery, observing the correct polarity.
  • Close the battery compartment again.

Operation

Automatic setting of the time according to the DCF signal

  • After the battery is inserted, the alarm clock automatically starts to search for a DCF signal.
  • After around 5-10 minutes (depending on how quickly the radio signal is received), the hands on the clock will adjust to the correct time.

Manual time setting

  • If the correct time has not been set automatically after around 10 minutes, no DCF signal has been received.
  • Press and hold the SET button to set the correct time manually. Once the required time is reached, release the SET button.
  • The clock automatically continues to search for the DCF signal every day. Once the signal is received successfully, the manually set time and date are overridden.
  • Change the location if necessary and avoid areas with sources of interference (cordless and mobile phones, radio loudspeakers, WLAN, etc.).

Starting manual reception

  • When the clock is running, press the REC button for 3 seconds. The hands move to the 12:00 position. The clock now starts to search for the DCF signal.
  • If no signal has been received, the clock will show the time previously stored.

Alarm clock

Alarm clock settings

  • Turn the setting wheel on the back of the alarm clock to set the desired alarm time.
  • Move the slider switch to the ON or OFF position to activate / deactivate the alarm.

Stopping the alarm / Snooze function

  • Once the alarm clock is activated, it is triggered at the corresponding time and a rising alarm signal is heard.
  • To stop the alarm clock prematurely, move the slider switch to the OFF position.
  • Move the slider back to the ON position to activate the alarm clock for the set alarm time.

Note: Snooze function

  • During the alarm signal, press the Zz/LIGHT button to activate the snooze function.
  • The alarm signal is interrupted for 5 minutes and then triggered again.

Backlight

  • Press the Zz/LIGHT button to illuminate the clock face for around 10 seconds.

RESET function:

  • If the clock is not set correctly for any reason, you can carry out a “reset”.
  • Use a metallic object (e.g. a needle) and short-circuit the time using the RESET button on the back of the alarm clock. All hands move to the 12 o’clock position.
  • After around 5-10 minutes (depending on how quickly the radio signal is received), the hands on the clock will adjust automatically to the correct time.

Care And Maintenance

  • Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
  • Ensure that no water is able to enter the product.

Warranty Disclaimer And Technical data

Warranty Disclaimer

  • Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

  • / “Flores” radio alarm clock
  • Power supply: 1.5 V, 1 x AA battery

Declaration Of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00222226, 00222229] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:

Frequency band(s): 77.5 kHz

Contact

Hama GmbH & Co KG

  • 86652 Monheim/Germany

Service & Support

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals