RISHANG RX22C0TC-A Flexible Side Bend Planar Neon Strip Instruction Manual

RISHANG RX22C0TC-A Flexible Side Bend Planar Neon Strip

Specifications

• Product Name: 1018-48V Flexible Side Bend Planar Neon Strip for IP66 Application
• Model: RX20C0TH-1
• Dimensions: 50001018mm / 196.850.240.47inch
• LED Color : White
• CCT (K) WL (nm): 3000/4000/5000 LED
• CRI : 80
• Luminous Flux: 807-964 Lm/m
• Working Voltage : 48V DC
• Working Current : 14mA
• Power: 8W/m
• IP Grade : IP66
• Operating Temperature : -25°C to +60°C / -13°F to +140°F
• Storage Temperature : -25°C to +70°C / -13°F to +158°F
• Warranty: 3 years

Product Usage Instructions

Connection Instruction

Note: Please ensure the correct connection of poles to the power supply.

Installation of Clip

1. Use screws to fix the clips or carriers on the mounting position.

2. Notes: 3 clips can be used for every 1 meter of Neon strip.

Installation of Carrier

1. When installing the Neon, do so from both ends simultaneously. Installing from one direction is prohibited.

2. Use a tool to disassemble carefully; do not pull the Neon directly.

Note: If the length of Neon is over 2m, it is recommended to install with the assistance of two persons.

FAQ

• Q: What is the warranty period for the product?
  • A: The product comes with a 3-year warranty.
• Q: What is the IP Grade of the Neon Strip?
  • A: The Neon Strip has an IP Grade of IP66, indicating high protection against dust and water ingress.
• Q: What are the recommended operating temperatures for the Neon Strip?
  • A: The recommended operating temperature range is from -25°C to +60°C (-13°F to +140°F).

Technical Application Guide

1018-48V Flexible Side Bend Planar Neon Strip of IP66

1018-48V Flexible Side Bend Planar, 8W/m constant voltage Neon Strip. Neon is featured in IP66 protection and great UV resistance, so it can be exposed to intense sunlight without yellowing and aging for a long time. The high light transmission further empowers it to be suitable for sign lighting, indoor and outdoor decorative lighting, and building outline lighting.

• Dual color eco-friendly silicone material adopted.
• Linear light and dot-free.
• Large side bending angle, flexible cutting.
• Pure copper FPC, reliable quality.
• IP66 protection and good UV resistance.
• Resistance against Acid and alkali corrosion.

Reliability

1018-48V Flexible Side Bend Planar Neon Strip of IP66

Basic Parameters

Packaging Diagram

Connection Instruction

Note： Please make sure the poles of the product are correctly connected to those of the power supply.

Installation

Installation of clip

Use screws to fix the clips or carriers on the mounting position.

Notes: 3 clips can be used for 1m.

Installation of carrier

1. When install the Neon, install it from both ends at the same time, install from one direction is prohibited.
2. Use tool to disassemble carefully, and do not pull the Neon directly.

Notes: If the length of Neon is over 2m, it is recommended to install by two persons.

Attention

Do not bend the Neon Radius less than 25mm.

Troubleshooting

Power on.
Broken-circuit or Short-circuit.| Troubleshoot the problems and power on again.
The wires of strips connect to the power supply terminal reversely.| Check the connection and ensure the polarity of the wires is connected correctly.
Part of LEDs Stopped Working| Part of power supplies have output failure.| Check the power supply system.
Part of wires of strips have broken down.
Reverse connection of polarity.| Correct connection.
LEDs Too Weak or Uneven| Overloaded power supply.| Replace it with a powerful one.
Excessive power loss of the circuit or the power loss of each circuit differs a lot.| Ensure the working voltage of strips is within±5%V of the rated voltage.

1. Shorten the length of wires between the first strip and the power supply or replaced with wires with larger diameter.

2. Ensure the cascading qty of each circuit does not exceed the allowed range and is well distributed.

Excessive cascading qty in series.| Adjust the cascading qty for the strip to ensure the qty for each electrical circuit is within the maximum cascading qty.
LEDs Flickering| Exposed or loose joints of wires.| Find out and tackle malfunction immediately.
Failures in power supply.| Replace it with a new one.

Declaration

• If the external flexible cable is damaged, please replace it with its manufacturer, service agent, or qualified person to avoid a hazard.
• For the specific installation and cautions, please refer to the user manual.
• The given data in this specification is based on our standard product. There may exist slight differences compared with actual products.
• All Illustrations in this specification are for reference only.
• This product is subject to change or modification without prior notice.
• RISHANG OPTOELECTRONICS CO., LTD. Reserves the right of a final explanation for this specification.

Revision History

Copyright RISHANGOPTOELECTRONICS CO.,LTD.

All Rights Reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>