KACO 87.0 TL3 String Inverters for Commercial and Industrial PV User Guide
- June 9, 2024
- KACO
Table of Contents
- 87.0 TL3 String Inverters for Commercial and Industrial PV
- Scope of delivery
- Accessories
- Overview
- Mounting
- Installation
- PE connection
- Status LED
- Communication variants
- Initial commissioning
- Group update / Group parameterization
- Registration Portal
- System overview
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Quickstart Guide
KACO blueplanet
87.0 TL3 String Inverters for Commercial and Industrial PV
| 87.0 TL3 | 110 TL3 | 150 TL3 |
|---|---|---|
| 92.0 TL3 | 125 TL3 | 155 TL3 |
| 105 TL3 | 137 TL3 | 165 TL3 |
Danger!
Danger to life due to electric shock and electrical discharge.
Dangerous voltages are present in the inverter.
- Only allow work on the device to be carried out by a qualified electrician.
- The device is only permitted to be opened or serviced by a qualified electrician.
- Always disconnect the device from the power supply during installation, maintenance and repairs and secure it against being switched on again.
- Do not connect or disconnect DC cables to or from the unit during operation to avoid dangerous electric arcs.
Scope of delivery
https://kaco-newenergy.com/de/service/mykacocom-kundenportal/
| Mounting kit | Quantity |
|---|---|
| Ziplock bag 100×150 | 1 |
| Label 70×35 | 1 |
| Washer M10 DIN 125 | 10 |
| Hexagon nut M10 DIN 934 | 5 |
| Hexagon head screw M10x25 DIN933 | 5 |
| CON-PIN-BTB 2POL 1ROW ANG 320V 8A P5,08 | 1 |
| CON-PIN-BTB 3POL 1ROW ANG 320V 8A P5,08 | 1 |
| CON-P SPRING 6-POL 1,5qmm 160V 8A RM3,5 | 1 |
| CON-PLUG SPRING 2POL 1,5q 160V 8A RM3,5 | 1 |
| Fischer dowel S12 | 4 |
| Hexagon wood screw 8×8 DIN571 | 4 |
| Spring washer M10 DIN128A | 5 |
| Cable tie 100×2,5 PA 6.6 nature | 3 |
| Combi-Screw DIN6900-3Z4-1TX8.8 | 1 |
Accessories
| Accessories | KACO order no. |
|---|---|
| Bending box | 1001917 |
| Kit input plate AC Inverter | 1001882 (double row) / 1001906 (M63/32) |
| Kit Overvoltage protection AC Inverter | 1001884 |
| Kit Overvoltage protection DC Inverter | 1001885 |
| Kit Surge Protection LAN Inverter | 1001886 |
| Kit Overvoltage Protection RS485 Inverter | 1001887 |
| PID Connection Set | 1001888 |
| WLAN adapter Digitus 150N micro | 3013222 |
| Spare fuses (10x85mm 1500V 5A PID) | 1001883 |
| KACO blueplanet DC-Breaker | 1001860 |
Overview
Mounting
Installation
5.1 DC connection
PE connection
Status LED
https://kaco-newenergy.com/de/service/mykacocom-kundenportal/
Communication variants
-
Communication board
-
USB socket
-
SD slot
-
Ethernet for network connection DHCP
-
RS485 – standard
-
DIP switch – Activate terminating resistor (2x)
DIP switch must be activated if KACO inverter or String Combiner is terminal device (120 mOhm).
Upper DIP switch: to String Combiner
Lower DIP switch: to inverter. -
INV OFF – Connection for remote control devices – 24V(+/-20%) /1A (min. 15mA)
-
ERR – Connection for external mains protection component (fault signal relay)
-
Ethernet – Only for commissioning via static IP
-
RS485 – Connection for string combiner (CON 200)
Initial commissioning
Group update / Group parameterization
Registration Portal
System overview
Werner-von-Siemens-Allee 1 | 74172 Neckarsulm | Germany
Tel. +49 7132 896-0
info@kaco-newenergy.de
www.kaco-newenergy.de
References
- myKACO.com Customer Portal | KACO new energy
- Home - New Energy
- Inverters for solar PV systems + battery storage | Kaco New Energy
- Wechselrichter für Photovoltaik + Batteriespeicher | Kaco New Energy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>