MASON RISHANG RM1101EC-A Flexible LED Strip Instruction Manual

MASON RISHANG RM1101EC-A Flexible LED Strip

Product Information

Specifications

• Stock Code: 002654
• CE 3 RoHS COB
• 320 LED DC
• LEDS/M Strip 24V
• IP65
• Copyright RISHANG OPTOELECTRONICS CO., LTD.
• Model: RM1101EC-A

Features

• 5000*11mm,1600pcs COB LEDs, silicone tube series, constant High-density COB LEDs;
• Voltage: 24Vdc
• Flexible LED strip (White10W/m, chip Linear lighting, without light spot, soft and uniform luminance)
• High CRI, high brightness, and high efficiency
• High-temperature resistance, long life
• Suitable for hotels, shopping malls, homes, cabinets, show frames, etc. as main lighting, indirect lighting, cove lighting, contour lighting, decorative lighting, etc.

Warranty
3 years or 13,000 hours, whichever comes first. Lifetime: 36,000 hours.

Optical and Electrical Parameters

P/N| LED Color| CCT (Finished products) (K)| Beam Angle| CRI| Luminous Flux (Im/m)| Luminous Efficacy (Im/w)| Working voltage (VDC)| Working current(mA)| Power (w)
---|---|---|---|---|---|---|---|---|---
RM1101EC-A-930 A30KN-P04-1| White| 3000| 90| 3| 850| 85| 417| 1m[3 5m[1 9.37 96.8 in] 5in]| 10
RM1101EC-A-940 A30KN-P04-1| White| 4000| 90| 3| 900| 90| 417| 1m[3 5m[1 9.37 96.8 in] 5in]| 10

Others

P/N| IP Grade| Operating Temp (°C)| Storage Temp (°C)| Standard length (m)| Max. cascading length (m)| LED Qty (pcs)| Weight (g/m)
---|---|---|---|---|---|---|---
RM1101EC-A| IP65| -25~ +60| -25~ +70| 5| 5| 1600| 45

Packaging Information

Product Usage Instructions

Connection Instruction

1. Reel the LED strip.
2. Put it into an antistatic bag.
3. Pack into the carton.
4. +red wire – black wire
5. Notes: please make sure the + and – of the product’s input are correctly connected to those of the power supply output.

Parts & Tools

• Product Spare Parts: LED Strip
• Self-provided Tools: Electrical Drill & Drilling bit, Scissors

Installation Steps & Cautions

1. Make sure the mounting surface is clean before installation.
2. Calculate the needed length and cut off the extra length along the cutting mark if necessary. If you need to add wires, please weld them at the next location with a printed mark.
3. While sticking strips, peel off the release paper of the tape step by step. Don’t peel off all release paper at a time to avoid getting your strip in a mess. Notes: No pressing the bead!
4. Stick Mylar tape to isolate the cutting position from the bottom of the profile inner slot to avoid short-circuit.
5. The installation at the corner is shown in the above figure.
   Notes: No bending it to a right angle; No twisting it to stick on the mounting surface.

FAQ

• Q: What is the warranty period for this product?
  A: The warranty period is 3 years or 13,000 hours, whichever comes first. The lifetime of the product is 36,000 hours.

• Q: What is the IP rating of this product?
  A: The IP rating of this product is IP65.

• Q: What are the recommended applications for this product?
  A: This product is suitable for hotels, shopping malls, homes, cabinets, show frames, etc. as main lighting, indirect lighting, cove lighting, contour lighting, decorative lighting, etc.

Specifications

Model

• RM1101EC-A

500011mm,1600pcs COB LEDs, silicone tube series, constant voltage 24Vdc, flexible LED strip(White10W/m, 10W/m, chip 620mil)

Picture:

Features

• High-density COB LEDs;
• Linear lighting, without light spots, soft and uniform luminance ;
• High CRI, high brightness, and high efficiency;
• High-temperature resistance, long life;
• Luminous surface width of 11±0.2mm;
• CE, RoHS compliant.

Applications

Suitable for hotels, shopping malls, homes, cabinets, show frames, etc. as main lighting, indirect lighting, cove lighting, contour lighting, decorative lighting, etc.

Warranty

• 3 years or 13,000 hours, whichever comes first
• Lifetime 36,000 hours.

Optical and Electrical Parameters

Others

Notes:

• Testing environment temperature: 25±2℃ [77±3.6℉];
• The above data each single product could differ from the typical values. The data is subject to change without prior notice;
• The above CCT is derived from the bare LED. Due to the refraction of the half-pack filling tube, there may be slight changes. Please refer to the actual sample for the final CCT.
• The above “–” means the parameters are not required temporarily.

Profile Drawings

Packaging Information

Notes:
The above qty and weight of packing are only for the packing shown in the picture, which might be different from other packing modes, thus for actual qty and weight please refer to actual samples.

Packaging Diagram

Connection Instruction

Notes:
Please make sure the”+”and”-“of the product’s input are correctly connected to those of the power supply output.

Parts & Tools

• Product Spare Parts
• Self-provided Tools

Installation Steps & Cautions

1. Make sure the mounting surface is clean before installation;

2. Calculate the needed length and cut off the extra length along the cutting mark if necessary; if need to add wires, please weld them at the next location with a printed mark.

3. While sticking strips, peel off the release paper of the tape step by step. Don’t peel off all release paper at a time to avoid getting your strip in a mess.
   Notes: No pressing the bead!

4. Stick Mylar tape to isolate the cutting position from the bottom of the profile inner slot to avoid short-circuit;

5. The installation at the corner is shown in the above figure.

   • Notes: No bending it to the right angle; No twisting it to stick on the mounting surface.

6. Connect strip wires to the output terminal of the power supply, and dispose with waterproof, insulation, short-circuit, and anti-corrosion protection at both the wire joints and the cut section of your strip (if any)

7. No bending the strip at the position of LED

8. No twisting the strip

9. No winding an object with a diameter <5cm

Troubleshooting

Power on
2.  No electricity due to short-circuit of external

power supply.

| Remove the malfunction caused by the short-circuit, and power it on again.
3.  The wires of strips connect to the power supply output reversely.| Check the connection and ensure the wires are connected correctly.
Part of the LEDs don’t work| 1.    Part of the power supplies do not have output.| ****

Check the power supply system.

2.    Part of the wires of the strips have malfunctioned.
3.    Particular modules connected reversely.| Correct connection
The brightness of LEDs is weak or uneven| 1.  Overloaded power supply;| Replace it with a higher power supply
2. The power loss of the power circuit is huge or the power loss of each circuit has a big difference.| Ensure the working voltage of strips is within±5%V of the rated voltage.

(1. Shorten the length of wires between the first strip and power supply or replace them with wires with a bigger diameter; 2. Ensure the cascading qty of the string is less than or equal to the allowed maximum cascading qty, and each strip

cascading qty is well-balanced.)

3.  Exceed in qty of strips in series| Lessen the cascading qty for strip and ensure the qty for each electrical circuit is within the maximum cascading qty.
LEDs are blinking| 1.    Poor contact in the joints.| Find out and tackle malfunction immediately.
2.    Failures in power supply.| Replace the power supply.

Declaration

• If the external flexible cable of the lightbox is damaged, please replace it with its manufacturer its service agent, or a qualified person to avoid a hazard.
• For the specific installation and cautions please refer to the user manual.
• The given data in this specification is based on our standard product. There may be existed slight difference compared with actual products.
• All Illustrations in this specification are for reference only.
• This product is subject to change or modify without prior notice.
• RISHANG OPTOELECTRONICS CO., LTD. reserves the right to a final explanation for this specification.

Rishang Optoelectronics Co., Ltd. (stock code: 002654)

• Add: North 701, Wanrun Building, No. 2519, Guangqiao Avenue, Fenghuang Street, Guangming New District, Shenzhen Guang Dong, 518108, China
• Tel: +86-755-33258896
• E-mail: info@ledlamps.com.cn.
• Website: www.ledlamps.com.cn.

Copyright RISHANG OPTOELECTRONICS CO., LTD. All Rights Reserved.

References

• 深圳日上光电有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>