ANYTEC HM09-A Smartwatch User Guide

ANYTEC HM09-A Smartwatch

Specifications

• Host Size: 46MMX13MM
• Bluetooth Version: BLE5.0
• Screen Size: 1.32 inch
• Battery Capacity: 300mAh
• Screen Resolution: 360X360
• Sensor: SC7A20

Product Usage Instructions

Sport Mode
Button Operation

• Long press the function button to enter the sports interface.
• Short press the function button to enter the menu interface.
• Long press the power button to power on/off.
• Short press the power key to control screen on/off and return to the main interface.
• Long press the sports button for the wallpaper switch.
• Short press the sport button to enter the sports interface.

Screen Operation
Swipe up for message interface, scroll down for the control interface, left slide for shortcut interface, and right slide for the main menu.

App Download
You can search for the Da Fit app in the App Store / Google Play / Baidu Assistant to download it. Open the watch APP download interface, use the scan function, scan to download or scan the QR code attached to download.

Note: After successful download and installation, please follow the interface prompts to register and login for better experience and use of the product.

Connect
Instructions for connecting to other devices.

Firmware Upgrade
Information on how to upgrade firmware for improved performance.

Waterproof Instructions

• Waterproof grade: IP67. Avoid wearing in hot baths as water vapor can damage the watch circuit board. More details on waterproof usage.

• Function Introduction
  The list of supported features includes Bluetooth calling, message notification, blood oxygen monitoring, sleep monitoring, heart rate monitoring, breathing training, sports mode, remote photography, music control, etc.

• Maintenance
  Tips on how to maintain the product for optimal performance and longevity.

• Safety Instructions
  Important safety information regarding the product usage.

• Warning
  A warning about unauthorized changes or modifications that could void the user’s authority to operate the equipment.

Product Introduction

1. Display
2. Function Menu
3. Power Key
4. Sport Mode

Button Operation

• Long press the function button
  Enter the sports interface

• Short press the function button
  Enter the menu interface

• Long press the power button
  Power on 2 Power off

• Short press the power key
  The screen on 2 Screen off 3 Return to the main interface

• Long press the sports button
  Wallpaper switch

• Short press the sports button
  Enter the sports interface

Screen Operation

• Swipe up interface
  Message interface

• Scroll down interface
  Control interface

• Left slide interface
  Shortcut interface

• Right slide interface
  Main Menu

App Download

1. You can search for the “Da Fit” APP in the App Store / Google Play / App Store / Baidu Assistant to download.
2. Open the watch APP download interface, use the scan function, scan to download or scan the QR code attached to download.

Note: After successful download and installation, please follow the interface prompts to register and login for a better experience and use of the product.

Connect

Pair with the watch using the “Da Fit” app on your phone.

How to connect: Open APP >> “Device” >> “Add Device” >> “Start Search” >> Select the model and connect, and wait for a while to complete the pairing.

Note:

1. In order to connect the watch and the phone successfully, you need to turn on the Bluetooth of the phone to connect the device.
2. When using an Android phone, the user needs to grant the location permission and enable the location information function of the mobile phone system, otherwise, the device may not be searched.

Firmware Upgrade

The APP will prompt a new firmware version, and the user can enter the APP interface and select firmware upgrade.

Upgrade Notes:

1. The upgrade operation can only be performed when the battery of the watch reaches more than 60%.
2. During the upgrade process, the mobile phone interface will prompt the upgrade progress bar, please do not do any operation on the watch, wait until the mobile phone prompts that the upgrade is successful, and the watch automatically restarts before operating the watch.

Waterproof Instructions

• Waterproof grade: IP67
  The waterproof performance of this product is not permanent and may weaken with the passage of time.

• Add: It is not recommended to wear it in a hot bath. Water vapor is produced when washing with hot water. Its molecular radius is small, and it is easy to penetrate into the gap of the watch case. When the temperature drops, it gradually condenses into water droplets, which damages the circuit board of the watch, and then damages the watch.

Function Introduction

Smartwatch Support: Bluetooth calling, Message notification, Blood oxygen monitoring, Sleep monitoring, Heart rate monitoring, Breathing training, Sports mode, Remote photography, Music control, etc.

Basic Parameters

Maintenance

It is recommended to wear and maintain according to the following three points:

1. Keep the product clean
2. Keep the product dry
3. Please wear the product correctly

For stains that are not easy to remove, it is recommended to scrub with alcohol.

Safety Instructions

1. Although smartwatches can detect real-time dynamic heart rate, they cannot be used for any medical purpose.
2. Do not disassemble or modify the equipment and accessories without authorization. Please contact after-sales service in case of equipment failure.
3. If the equipment is not used for a long time, please make sure to power up once every three months.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FAQs

Q: Can this smartwatch be used for medical purposes?
A: No, although it can detect real-time dynamic heart rate, it is not intended for medical purposes.

Q: How often should I power up the equipment if not in use?
A: It is recommended to power up the equipment at least once every three months if not in use for an extended period.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>