SNOWCIN WTK08 Walkie Talkies Instruction Manual

SNOWCIN WTK08 Walkie Talkies

Product Information

1. Antenna: The antenna for transmitting and receiving signals, don’t grab it with your hand when it is working, or it will affect the communication quality.
2. PTT Button: Long press to transmit voice, release to receive.
3. Microphone : When transmitting voice, speak 3-Scm away from the voice brief.
4. Speaker : Product speaker, it will make sound when receMng.
5. Power indication : Tum on the power, the eyes will light up normally, and intermittent slow flash (about 30 seconds/ times). When in low power, lights will fast flash (about 3 seconds). Note: voice quality may be affected when the power is low, it is recommended to replace the battery as soon as possible.
6. Power Switch : Toggle to OF to power off; Toggle to “1” or”2″ to power on and be in channel 1 or channel 2.
7. Battery Compartment Screws : loosen the screws to reveal the battery compartment, you need to load 3 AM. batteries.

Warning: Each walkie-talkie needs 3AM. batteries, and batteries are not included in the package.
You need to prepare the batteries before you can make the walkie-talkie won<, and please pay attention to the polarity can’t be reversed when installing the batteries, otherwise It may damage the product and cause danger. We recommend that you always use high quality AAA alkaline batteries. If the walkie-talkie is not used for a long time, please take out all the batteries.

Instructions for use

1. Check the device carefully to make sure it is not damaged, if It is damaged please contact the seller for replacement; and please do not use the damaged device as it may jeopardize safety.

2. Remove the screws on the back of the device, open the battery compartment cover, put 3 AM batteries into the battery compartment according to the instructions, put the battery compartment cover back to the back and fix It with screws.

3. Tum the power switch to “1” or “2” position, the device will be in the power on state.
   Note: The devices have the same channel in order to1 talk to each other. Place the device at a distance of 5 centimeters to talk do not grab the antenna or put the antenna dose to your head.

4. Press and hold the PTT button, the device will be in transmitting state, release to receive incoming calls.
   Coverage will be determined by the surrounding environment, as physical obstacles such as hills or high-rise buildings may affect coverage.

Technical Specifications

Channel 2: 467.6625MHz
Frequency Stability| ±5ppm
Channels| 2
Voltage| DC 4.5V
RF Power| ≤ 10mW
Output| ≤ 50mW
Range| Up to 0.3 Km (Open field)

Safety Information for Users

For your safe and efficient use of this product, please read the following safety intonation carefully:

1. Turn off the intercom before entering a flammable or explosive environment.
2. Do not replace or charge the battery in a flammable or explosive environment.
3. Do not use a walkie-talkie with a damaged antenna, which may cause minor burns to your skin.
4. Repair work on the walkie-talkie can only be carried out by professional technicians, please do not disassemble the walkie-talkie by yourself.
5. To avoid problems caused by electromagnetic interference and/or electromagnetic compatibility, tum off your walkie-talkie in places where the “Please tum off your walkie-talkie” sign is posted.
6. This walkie-talkie is not fully waterproof, please keep it dry.
7. Do not expose the walkie-talkie to direct sunlight or place it near a heating device for a long period of time.
8. When the walkie-talkie is transmitting, keep the walkie-talkie in a vertical position and speak close to the speaker. If you wear a portable walkie-talkie on your body, make sure that the antenna is at least about 5 centimeters away from your body when the walkie-talkie is transmitting.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall Be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product, The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office or your household waste disposal service.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modi? cations to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

ISED Statement

English: This device contains licence-exempt transmitter(s)/receiver (s) that comply with Innovation, Science and Economic
Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES – 3 (8)/ NM8 – 3(8).

This equipment should be installed and operated with minimum distance 0cm between the radiator&yourbody. Cet equipement doit etre installe et utilise a une distance minim ale de 0cm entre le radiateur et votre corps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>