SHURE NXN8-C Nexadyne 8 Handheld Vocal Microphone Instruction Manual
- September 13, 2024
- Shure
Table of Contents
SHURE NXN8-C Nexadyne 8 Handheld Vocal Microphone
Introduction
In the Nexadyne 8 user guide, learn about using the NXN8/C and NXN8/S vocal
microphones and RPW200, RPW202, RPW204, and RPW206 wireless capsules. With
Revonic technology, Nexadyne 8 vocal microphones reduce handling noise for
superior sound.
Version: 1.0 (2024-E)
NXN8 Handheld Vocal Microphone
General Description
Nexadyne 8 Dynamic Vocal Microphones are cardioid or supercardioid dynamic
microphones for professional vocal performance. Nexadyne 8 microphones feature
patented Shure Revonic dual-engine transducer technology, with two precisely
calibrated transducers working together to achieve optimal performance. The
result is a high performing microphone line that combines stateoftheart
acoustic signal processing, exceptional cardioid or supercardioid polar
pattern linearity, and noise reduction. Built with the consistency,
durability, and performance that only Shure can provide, the Nexadyne 8 ships
with a discreet black finish and includes mic clip and carrying case.
The Nexadyne 8/C wireless cardioid dynamic vocal microphone capsule is
available in black (RPW200) or nickle (RPW202) finishes clean and natural
vocals that easily reach every corner of the venue. The Nexadyne 8/S wireless
supercardioid dynamic vocal microphone capsule is available in black (RPW204)
or nickel (RPW206) finishes for focused and natural vocals that cut through to
the very last row.
Revonic Transducer Technology
Revonic Technology uses two matched transducers to improve microphone performance. This provides natural and vivid clarity with an optimized and clear signal output. Revonic transducers provide several benefits:
- minimized mechanical and handling noise
- reduced stage bleed
- stronger and clearer output
Placement
Place the microphone so that unwanted sound sources, such as monitors and loudspeakers, are directly behind it. To minimize feedback and ensure optimum rejection of unwanted sound, always test microphone placement before a performance.
P.A.LOUDSPEAKER
Cardioid
P.A.LOUDSPEAKER
Supercardioid
Load Impedance
For the microphone’s signal to transfer well, the load/input impedance of your preamplifier should be at least 1000 Ω. Most modern microphone preamplifiers meet this requirement.
Specifications
Type
Dynamic (moving coil)
Polar Pattern
| NXN8/C: | Cardioid |
|---|---|
| NXN8/S: | Supercardioid |
| RPW200 and RPW202 | Cardioid |
| RPW204 and RPW206 | Supercardioid |
Frequency Response 50 to 20,000 Hz
Output Impedance
| NXN8/C | 300 Ω |
|---|---|
| NXN8/S | 450 Ω |
Sensitivity open circuit voltage, @ 1 kHz, typical
| NXN8/C | –54.0 dBV/Pa[1] |
|---|---|
| NXN8/S | –51.0 dBV/Pa[1] |
| RPW200 and RPW202 | -45.0 dBV/Pa[1] |
| RPW204 and RPW206 | -43.0 dBV//Pa[1] |
Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
| NXN8/C | 258 g (0.57 lb) |
|---|---|
| NXN8/S | 294 g (0.65 lb) |
| RPW200 and RPW202 | 155 g (5.5 oz) |
| RPW204 and RPW206 | 185 g (6.5 oz) |
Connector
For NXN8/C and NXN8/S Three-pin professional audio (XLR), male
Housing
| NXN8/C and NXN8/S | Die-cast aluminum with Black Paint |
|---|---|
| RPW200, RPW202, RPW204, RPW206 | Aluminum and steel grille |
[1] 1 Pa=94 dB SPL
Nexadyne 8/C
Nexadyne 8/C
Furnished Accessories
| A25E | Mic Clip/Swivel Adapter |
|---|---|
| ANXNC | Wired Case for NXN XLR HH Microphone |
| 31B1856 | Brass Adapter |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>