Danfoss 080Z2822 Gas Sensor Strobe and Horn Installation Guide
- June 1, 2024
- Danfoss
Table of Contents
Danfoss 080Z2822 Gas Sensor Strobe and Horn
Specifications
- Product: Danfoss Gas Sensor Strobe and Horn
- Code Number: 080Z2822
- Model: 80Z975
- IP Rating: IP65
- Class: Class 2
Product Usage Instructions
Wiring
The wiring for the Danfoss Gas Sensor Strobe and Horn is as follows:
- Danfoss 80Z976: [Details]
- Danfoss 80Z978: [Details]
- Danfoss 80Z982: [Details]
- Danfoss 80Z983: [Details]
- Danfoss 80Z981: [Details]
Dimensions and Appearance
The product dimensions and appearance are as follows:
- Model: Danfoss 80Z974
- Features: [Details]
Sound Setting
To set the sound preferences for the Danfoss Gas Sensor Strobe and Horn:
- Switch on/off based on the desired tone.
- Adjust volume and light settings using the provided controls.
- Refer to the provided table for different tone types, frequencies, and descriptions.
Warnings
Important warnings for using the product:
- Installation must be done by qualified personnel.
- Do not dispose of the product as common waste.
- Rapid flashing lights may induce photosensitive epilepsy under certain circumstances.
- Always disconnect power before servicing the product.
FAQ
- Q: Can I adjust the sound settings on the Danfoss Gas Sensor Strobe and Horn?
- A: Yes, you can adjust the sound settings using the provided controls to select different tones and adjust volume levels.
- Q: What are the precautions I need to take during installation?
- A: Make sure installation is carried out by qualified individuals, and always disconnect power before servicing the product.
Specification
- Alarm Sounder
- Current consumption 12 V DC: 23 mA (Siren) / 30 mA (Flash) / 38 mA Siren + Flash
- Current consumption 24 V DC: 32 mA (Siren) / 28 mA (Flash) / 45 mA Siren + Flash
- Operating voltage: 12 – 24 V DC
- IP rating: IP 65
- Operating temp.: -40 – +55 °C
- Sound output: itermitten 1000 Hz, max. = 94 dB(A)
- 1m Med = 85 dB(A)
- 1m Min = 73 dB (A) 1m
- Number of user-selectable tones: 32
- Lens colour: Red
- Material: PC
Fuse wire protection: On the power supply line the rating of the supply fuse must be according to the voltage.
Wiring
Dimensions and appearance
Supply voltage to DGS is DC
Warnings:
Installation has to be done by qualified personnel. Not to be disposed of as common waste. The possibility exists that rapid flashing lights, under certain circumstances, might induce photosensitive epilepsy. Disconnect power before servicing
Assembly
Sound setting
Switch a sounds
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>