IKEA HAMNSKÄR Keran Mixer Wastafel Instruction Manual
- June 1, 2024
- Ikea
Table of Contents
IKEA HAMNSKÄR Keran Mixer Wastafel
Product Information
Specifications
- Pressure Range: 1 – 5 bar / 0.1 – 0.5 MPa / 14.5 – 72.5 psi
- Flow Rate: 0.5 – 10 bar / 0.05 – 1 MPa / 7.2 – 145 psi
- Connection Size: G1/2
Product Usage Instructions
Installation
Installation must be performed in compliance with current local
construction and plumbing regulations. If unsure, contact a professional.
Switching Mixer Tap
- Switch off the main shut-off valve before changing the mixer tap.
- Follow the specific instructions provided in the manual for your model.
Important Note on Tightening
Do not tighten too hard as this can lead to damage of hoses, pipes, and
washers.
FAQ
-
Q: What should I do if I encounter difficulties during installation?
A: If you encounter any issues or are unsure about the installation process, it is recommended to seek assistance from a professional plumber or technician. -
Q: Can I use this product with high water pressure?
A: The product is designed to work within a specified pressure range. Operating the product outside of this range may affect its performance and durability.
IMPORTANT
- Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
- Switch off main shut-off valve before changing mixer tap.
WHAT’S INCLUDE
INSTALLATION INSTRUCTION
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and
washers.
Before use:
- Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes.
- Then screw the Aerator/Flow Guide back in place.
- Ensure that it is tight to prevent removal by hand.
Check at regular intervals to make sure that the installation is not leaking.
© Inter IKEA Systems B.V.