iQIBLA N01 Zikr Ring Noor User Manual
- June 1, 2024
- iQIBLA
Table of Contents
iQIBLA N01 Zikr Ring Noor
Product Information
Specifications:
- Compliance: Part 15 of the FCC Rules
- Interference Conditions: Must not cause harmful interference and must accept any received interference
- Modifications: Not approved without voiding user’s authority
- Antenna Usage: Must not be co-located or operated with other antennas/transmitters
- Exposure Evaluation: Meets general RF exposure requirements in portable conditions without restrictions
Product Usage Instructions
Operating Conditions:
Ensure the device operates within FCC Part 15 compliance. Avoid causing harmful interference and be prepared to accept any interference received during operation.
Modifications:
Do not make changes or modifications to the device unless expressly approved by the responsible party to maintain operational authority.
Antenna Usage:
Avoid co-locating the device and its antennas with any other antenna or transmitter to prevent operational issues.
Radiation Exposure:
The device has been evaluated to meet RF exposure requirements in portable conditions. Use the device without restrictions related to radiation exposure.
FAQ
- Q: Can I modify the device on my own?
- A: No, modifications should not be made without express approval to avoid voiding your authority to operate the equipment.
- Q: What should I do if I experience interference?
- A: This device is designed to accept interference, ensure you are not causing harmful interference, and continue operating normally
Ring’s appearance
Interface display
- Time (APP binding reauired)
- Battery
- Bluetooth connection status
- Tasbih counter
- Customized Tasbih icon
- Prayer notification
- Tasbih reminder
Charging
Note: Before starting charging, check and clean up any water stains that may exist in the Zikr Ring charging port.
Basic operations
Button operations
- Short press
- Turn on the screen and start counting.
- Long press
- Reset counter.
- Display Bluetooth address when counter is zero.
Note: Counts updated to the APP only after resetting the counts to zero.
Connect iQIBLA Life APP
Bind Zikr Ring
- Use your smartphone to scan the QR code on the right to enter Google Play or 27 App Store to download iQIBLA Life APP.
- Open the APP to register a new account and fill in personal information.
- Click on the iQIBLA icon at the bottom of the screen, then on the Add device icon, and choose Bluetooth search.
- Select the device corresponding to the ring’s Bluetooth address.
- Complete the binding of the Zikr Ring.
Note: Your ring can only be bound with one account, if you want to bind it to another account you would need to unbind it from the first account.
Unbind Zikr Ring
- Go to your ring page in the app.
- Go to Settings and choose Unbind.
- Complete unbinding process by entering the verification code.
Basic Functions
Tasbih
- After the screen is turned on, use the button to make Tasbih.
- From the Tasbih settings icon in the APP, you can customize the vibration alert settings.
Customize Tasbih
- Enter the “Custom Tasbih” interface.
- Choose the Tasbih content or write the Tasbih content yourself.
- Select your goal and press Start.
- Start your Tasbih using the ring, when the number reaches the goal you set, the ring will vibrate and it will save the Tasbih you have done in the Custom Tasbih records in the APP.
Find Zikr Ring
Click “Find Ring” on the ring interface of the APP, Zikr Ring will vibrate for 10 seconds, press the ring’s button to stop the vibration.
Tasbih reminder
Turn on “Tasbih Reminder” in APP and synchronize, Zikr Ring will remind you to make Tasbih.
Reminder of prayer times
In the main APP interface, you can turn on/off prayer times reminders individually for each prayer, as well as manually modify prayer times.
Prayer calculation method
You can choose a prayer calculation method based on your region or manually adjust prayers calculation angles for your region.
Screen sleep time
You can adjust the screen sleep time from the settings in the device interface for the range 10s-60s.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. in portable exposure condition without restriction.