Freesub PD150 Pro Easy Mug Press Machine User Manual

Freesub PD150 Pro Easy Mug Press Machine

Product Information

Specifications:

• Product Name: Pro Easy Mug Press Machine
• Item Number: PD150
• Max. Temperature: 280°F
• Compatible Mug Size: 11 oz. – 15 oz.
• Rated Voltage/Frequency: 220V/50Hz, 110V/60Hz
• Rated Power: 280W

Product Usage Instructions

Safety Instructions:

1. Keep the machine unplugged when moving it.
2. Use the machine on a flat and stable surface in a ventilated room.
3. Wear heat-resistant gloves when using the machine.
4. Avoid using the machine in hazardous locations.
5. Do not use the machine when it cannot function properly.
6. Do not disassemble and reassemble the machine without proper guidance.
7. Avoid plugging the machine into an incompatible AC outlet.
8. Avoid touching the mug heater while the machine is heating up.
9. This machine is not intended for use by individuals with impairments unless supervised by someone responsible.
10. Children should only use the machine under adult supervision.

How to Print:

1. Connect the power cord to the inlet and plug into an AC socket.
2. Press the power button once to turn on the mug press and hold for 3 seconds to turn it off.
3. The machine will shut down automatically after 30 minutes of inactivity.

Indicator Light States:

• Orange Light: Heating in process
• Green Light: Set temperature reached, ready for printing on the mug.

Emergency Stop:

In case of emergency, press the power button at any time to open the mug heater.

Reset Irregular Light:

If the indicator light blinks irregularly, press the power button 5 continuous times to stop the machine. It will restart automatically after 15 seconds.

Printing Setting:

Use a sublimation printer to print your design on sublimation paper for 11 oz. or 15 oz. mugs.

Setting the Temperature:

1. Turn off the machine or let it remain inactive.
2. Long press the power button for 6 seconds until the indicator light blinks in orange.
3. The five lights above indicate different temperature levels. Press the power button to choose preferred level.
4. Wait 5 seconds for the machine to save the setting automatically and exit setting mode.
5. The automatic temperature setting is Level 3.

Frequently Asked Questions

Q: Is the mug heater covered under warranty?

A: The mug heater is vulnerable and not covered under warranty.

SKU: H-HOBBY/MUG/AUTO
WhatsApp: 060 600 6000
Website: am.co.za
Email: services@am.co.za

Start Here
Please read the warnings carefully to avoid potential injuries.

SAFETY INSTRUCTIONS

To avoid injuries or death caused by electric shock, please read all the instructions before using the machine.

1. Keep the machine unplugged when moving it.
2. Use the machine on a flat and stable surface in a ventilated room.
3. Wear heat-resistant gloves when using the machine.
4. Do not use the machine in a hazardous location.
5. Do not use the machine when it cannot function properly.
6. Do not disassemble and reassemble the machine without proper guidance.
7. Do not plug the machine in an incompatible AC outlet.
8. Do not touch the mug heater while the machine is heating up.
9. This machine is not intended to be used by people who have physical or sensory impairments or lack appropriate experience and knowledge unless under the supervision and guidance of a person responsible for their safety.
10. Children may only use the machine under the supervision of an adult responsible for their safety.

PRODUCT INTRODUCTION

NOTE: The mug heater is vulnerable; it is not covered under the warranty.

Connect the power cord to the inlet and plug the prong into the AC socket.

Main parameter

• Product Name Pro Easy Mug Press Machine
• Item Number PD150
• Max.Temperature 2oo°C/392°F
• Compatible Mug Size 1 1 oz. – 1 5 oz.
• Rated Voltage/Frequency 220V/50Hz 110V/60Hz
• Rated Power 280W

POWER 0N/OFF

1. Press the power button once to turn on the mug press.
2. Long press the power button for 3 seconds to turn it off.
3. The machine will shut down automatically after 30 minutes of not being in use.

HOW TO PRINT?

1. When the indicator light turns green, you can start printing on your mug
2. Put the mug into the mug heater. Once the sensor senses the mug, the mug heater will automatically enclose the mug.

Caution! Avaid directly Duching the heat plate

INDICATOR LICHT STATE

lf the first light is blinking, the machine is still heating up. The entire heating process takes approximately 180 seconds.

If all lights are on, the printing process is complete. The mug heater will open automatically, and you can take out the mug.

EMERGENCY STOP

RESET IRREGULAR LIGHT

If the indicator light blinks irregularly, press the power button 5 continuous times to stop the machine. After 15 seconds, it will restart automatically.

PRINTING SETTING

SETTING THE TEMP

1. Turn off the machine or let it remain inactive.

2. Long press the power button for 6 seconds.

3. Release the button when the indicator light blinks in orange.

4. The five lights above indicate different temperature levels.
   Press the power button to choose the preferred temperature level.

5. Wait 5 seconds for the machine to automatically save the setting.
   The machine will then exit the setting mode.

6. The automatic temperature setting is Level 3.

SETTING THE COUNTDOWN

1. Turn off the machine or let it remain inactive.
2. Long press the power button for 10 seconds.
3. Release the power button when the indicator light blinks in green.
4. The five lights above indicate different time lengths. Press the power button to choose the preferred countdown length.
5. Wait 5 seconds for the machine to automatically save the setting. The machine will then exit the setting mode.
6. The automatic countdown setting is 60 seconds.

NOTE:
To continuously improve its products, us reserves the right to modify this information without prior notification.
For any questions during assembly, please watch the video in the product page for reference. Or contact our customer service with any questions, comments, or concerns.
Thank you for using us products in your home!

References

• AM.CO.ZA® Achievement Matters, CNC Machinery, Spare-Parts, Consumables & Materials 2024 - AM.CO.ZA® Achievement Matters, CNC Machinery, Spare-Parts, Consumables & Materials

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>