PICHLER Bo 105 Helicopter Polizei RTF Installation Guide

PICHLER Bo 105 Helicopter Polizei RTF

Product Information

Specifications

• Model: Polizei Bo105 helicopter
• Date: Mittwoch, 21. February 2024
• Time: 14:57:33

Product Usage Instructions

1. Preparation:
   Ensure the helicopter is fully charged before use.

2. Turning On:
   Press and hold the power button until the indicator lights up.

3. Takeoff:
   Gently push the throttle stick upwards to lift off the ground.

4. Flight Controls:
   Use the remote control to maneuver the helicopter in different directions.

5. Landing:
   Gradually reduce the throttle to land the helicopter safely.

6. Shut Down:
   Press and hold the power button until the indicator turns off.

SAFETY INSTRUCTIONS

Please read the manual before start playing. This helicopter is not a toy and is not suitable for children under 14 years of age. Only fly in open areas with no obstacles, away from any spectators and animals. Rotating propeller can cause severe injuries. Keep away from rotating propellers and protect your eyes with adequate protection. Always keep a safe distance to the flying helicopter. When not in use, always unplug the battery and store in fireproof, cool and dry places. Only use the supplied charge lead to charge the battery. Always keep batteries away from children. If swallowed, call medical help immediately. Do not dismantle batteries, do not throw in fire and do not expose in heat and/or sunlight.

Dimension

KIT CONTENT

1. Hubschrauber Helicopter
2. Fernsteuersender Radio Transmitter
3. LiPo Akku 380mAh – 3,7V LiPo Battery
4. USB Ladekabel USB Charge Lead
5. Werkzeug Tools
6. Bedienungsanleitung Instruction Manual

Radio Transmitter Functions

Parts Description

Charge Battery

1. Plug the USB charge lead into the PC
2. Connect LiPo battery to charge lead, blue light flashing = charging, four lights on = charging completed

Charge Lead can also be plugged into a mobile phone power supply or Power Bank, to charge the battery.

Flight Preparations

Make sure the flight battery and transmitter batteries are full. Choose a flying area that is free of obstacles, apart from traffic, spectators and power lines. Rotor blades should move freely and not tighten too much, otherwise the helicopter can cause vibrations.

Steering Functions

Elevator

Aileron

Starting Procedure

1. Turn on the transmitter with the helicopter standing nearby.
2. Slide the LiPo battery into the Helicopter. Keep the on-button on the battery pressed for a few seconds until the LEDs are lit.
3. LED lights on the Helicopter and Transmitter are blinking. The transmitter makes an acoustic signal and lights are always on, binding successfully.
4. Pull both joysticks to outer angles downwards to start the helicopter. You can also press the one-key auto take-off button.
5. To land the helicopter, pull back the throttle for 3 seconds and then release it until the motors stop. You can also use the autoland function by pressing the auto land button on the upper right side of your radio transmitter.

Fine Tuning – Adjustment

If the Helicopter has yaw problems during hovering, it can be fine-tuned using the trimming buttons on the radio transmitter during flight.

Gyro Calibration

To calibrate Gyro Sensors place Helicopter on leveled surface. Pull both control sticks to the down left position. LED on the helicopter flashes fast, then acoustic signal If LED on the Helicopter lights up, calibration is finished.

Spare Parts and Service

FAQ

Q: How long does the battery last?
A: The battery life varies but typically provides around 10-15 minutes of flight time.

Q: Can I replace the rotor blades?
A: Yes, you can replace the rotor blades if needed. Refer to the user manual for instructions on how to do so.

Q: What should I do if the helicopter drifts to one side during flight?
A: Try adjusting the trim settings on the remote control to stabilize the helicopter. If the issue persists, recalibrate the gyroscopic sensors.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>