VULNESS 1708BX22 Inground Pool Fountain Instruction Manual
- June 1, 2024
- VULNESS
Table of Contents
VULNESS 1708BX22 Inground Pool Fountain
Parts List
- Waterfall Pool Fountain
- Spray Heads
- Parts List
- Riser
- Pressure Regulator
- Threaded Adapter
Installation
- Shut down the pool pump prior to installing the fountain.
- Loosen the eyeball ring and remove it alongside the eyeball.
- Loosen and eliminate the eyeball seat.
- Ensure all three components – the ring, eyeball, and eyeball seat – are removed; otherwise, installing the fountain won’t be possible.
- Connect the Pressure Regulator to the return jet. NOTE: Depending on the return jet’s design, you might need the Threaded Adapter provided in the kit.
- Identify the locking ring on the Pressure Regulator and securely fasten it against the pool return jet.
- Attach the Riser to the Pressure Regulator.
- Attach the Spray Heads to the Riser.
- Rotate the Spray Heads to adjust the waterflow direction, then firmly secure their rings.
Modify the spray height by adjusting the Pressure Regulator
Tip: For a higher waterfall, reduce the opening size.
- Fully closed High-spray
- Partially closed Medium spray
- Fully opened Low spray
Manage the water spray direction by adjusting the spray head and riser. After adjustments, ensure the locking rings are firmly secured.
Warning
Assemble and disassemble by adults only, following provided instructions. This
is not a toy, keep out of reach of children to prevent accidents.
Avoid touching or obstructing the sprayer during use to prevent damage. Ensure
all accessories are firmly attached before operating.
Use this product only as described in the manual to prevent misuse. Perform
regular maintenance as per the manual for safe and optimal use. Exercise
caution around water; this product is not for unsupervised use.
Engage with VULNESS. For further instructions and Customer Care Support please
visit: [email protected]